Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

ICPCBF303 Mapping and Delivery Guide
Run and monitor envelope manufacturing machines

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency ICPCBF303 - Run and monitor envelope manufacturing machines
Description
Employability Skills
Learning Outcomes and Application This unit describes the skills and knowledge required to run, monitor and adjust envelope manufacturing machines and maintain the production process.It applies to individuals who work under direct supervision with limited responsibility for ensuring output is in accordance with quality standards and issues are resolved with minimum downtime.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Gather evidence to demonstrate consistent performance in conditions that are safe and replicate the workplace. Noise levels, production flow, interruptions and time variances must be typical of those experienced in the converting, binding and finishing field of work and include access to special purpose tools, materials and equipment used to manufacture envelopes.

Assessors must satisfy NVR/AQTF assessor requirements.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Monitor production process
  • All details required for the job are checked and confirmed against job specifications
  • Correct materials and tools are checked and available for the job
  • Supply of materials throughout run is maintained
  • Work area is safe and ready for production according to safety requirements
  • Machine is run at optimum speed for maintaining quality output
  • Samples from the machine are selected and checked to ensure they conform with required quality standards
  • Machines are adjusted to maintain quality of output
       
Element: Maintain quality
  • Correct procedures for removal of waste are followed according to enterprise procedures
  • Samples are continuously monitored for defects, and defects are removed
  • Efficiency, quality and output rate of production run are monitored for problems, and any deficiencies resolved
  • Locations of all emergency shutdown buttons and triggers are known
       
Element: Identify problems
  • Faults which affect quality of envelopes are identified and rectified
  • Problems that reduce rate of output are identified and fixed
  • Faults that affect efficient operation of equipment are identified and resolved
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENT

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Monitor production process

1.1 All details required for the job are checked and confirmed against job specifications

1.2 Correct materials and tools are checked and available for the job

1.3 Supply of materials throughout run is maintained

1.4 Work area is safe and ready for production according to safety requirements

1.5 Machine is run at optimum speed for maintaining quality output

1.6 Samples from the machine are selected and checked to ensure they conform with required quality standards

1.7 Machines are adjusted to maintain quality of output

2. Maintain quality

2.1 Correct procedures for removal of waste are followed according to enterprise procedures

2.2 Samples are continuously monitored for defects, and defects are removed

2.3 Efficiency, quality and output rate of production run are monitored for problems, and any deficiencies resolved

2.4 Locations of all emergency shutdown buttons and triggers are known

3. Identify problems

3.1 Faults which affect quality of envelopes are identified and rectified

3.2 Problems that reduce rate of output are identified and fixed

3.3 Faults that affect efficient operation of equipment are identified and resolved

Evidence of the ability to:

demonstrate how to maintain throughput of envelope manufacturing machines consistently, according to job specifications, safety requirements and quality standards

locate and operate all safety devices on the machine.

Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.

To complete the unit requirements safely and effectively, the individual must:

explain common faults associated with envelope manufacturing machines, the causes and how to correct

identify enterprise quality standards, documentation procedures and fault procedures relevant to this task, where they are kept, and the information included in them.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENT

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Monitor production process

1.1 All details required for the job are checked and confirmed against job specifications

1.2 Correct materials and tools are checked and available for the job

1.3 Supply of materials throughout run is maintained

1.4 Work area is safe and ready for production according to safety requirements

1.5 Machine is run at optimum speed for maintaining quality output

1.6 Samples from the machine are selected and checked to ensure they conform with required quality standards

1.7 Machines are adjusted to maintain quality of output

2. Maintain quality

2.1 Correct procedures for removal of waste are followed according to enterprise procedures

2.2 Samples are continuously monitored for defects, and defects are removed

2.3 Efficiency, quality and output rate of production run are monitored for problems, and any deficiencies resolved

2.4 Locations of all emergency shutdown buttons and triggers are known

3. Identify problems

3.1 Faults which affect quality of envelopes are identified and rectified

3.2 Problems that reduce rate of output are identified and fixed

3.3 Faults that affect efficient operation of equipment are identified and resolved

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
All details required for the job are checked and confirmed against job specifications 
Correct materials and tools are checked and available for the job 
Supply of materials throughout run is maintained 
Work area is safe and ready for production according to safety requirements 
Machine is run at optimum speed for maintaining quality output 
Samples from the machine are selected and checked to ensure they conform with required quality standards 
Machines are adjusted to maintain quality of output 
Correct procedures for removal of waste are followed according to enterprise procedures 
Samples are continuously monitored for defects, and defects are removed 
Efficiency, quality and output rate of production run are monitored for problems, and any deficiencies resolved 
Locations of all emergency shutdown buttons and triggers are known 
Faults which affect quality of envelopes are identified and rectified 
Problems that reduce rate of output are identified and fixed 
Faults that affect efficient operation of equipment are identified and resolved 

Forms

Assessment Cover Sheet

ICPCBF303 - Run and monitor envelope manufacturing machines
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

ICPCBF303 - Run and monitor envelope manufacturing machines

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: