List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
ELEMENT | PERFORMANCE CRITERIA |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Prepare for job | 1.1 Job specifications are read and interpreted from job documentation or production control system 1.2 Set-up is planned and carried out correctly in minimum time with minimum wastage 1.3 Availability of all job related components is checked |
2. Set up delivery systems | 2.1 Delivery systems are set up and adjusted according to job specifications 2.2 Substrate is added to and removed from the process according to job specifications |
3. Set up machine and in-line units | 3.1 Collating/inserting system is set up and adjusted according to job specifications 3.2 Minor in-line printing/converting/binding units are set up for basic processes and adjusted according to machine requirements and job specifications 3.3 Assistance is given in set-up of major in-line printing/converting/binding units (NOTE: if entire set-up is completed, refer to appropriate competency standards) |
4. Conduct sample run | 4.1 Material to be used for sample is organised correctly 4.2 Machine is set up and operated to produce a specified sample according to work health and safety requirements, manufacturer’s specifications and enterprise procedures 4.3 Sample is visually inspected and/or tested or laboratory testing is organised according to enterprise procedures 4.4 Results are interpreted to determine adjustment requirements 4.5 Adjustments are carried out according to product and machine specifications |
Evidence of the ability to:
correctly set up machines for complex collating for a minimum of FOUR products, including in-line processes on FOUR occasions, (if possible) including:
two sheet jobs, each using different sizes and weights of substrate
two section jobs, with and without lip/lap, according to manufacturer’s and job specifications, enterprise procedures and listed performance criteria
demonstrate all safety devices on the machine.
Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.
To complete the unit requirements safely and effectively, the individual must:
All Systems
identify work health and safety (WHS) factors for:
setting up and/or operating machine transport systems
when the machine is operating
adjusting machine units and before readjusting the machine
determine important information concerning collating found in the job documentation or production control system and how to interpret this information to ensure smooth workflow throughout the factory
explain elements to consider when planning a collated sample
identify areas of the machine to adjust to allow for 42gsm stock
list ways the machine can be adapted to facilitate smaller/larger stock
identify factors that govern speed the machine operates at
determine indicators that show the machine needs lubrication
list steps to ensure correct alignment of in-line processes/units
determine adjustments to keep units correctly positioned
determine requirements for an acceptable collating result
explain the cause of sheets creasing in the machine delivery
determine adjustments to the machine to alleviate bruising of no carbon required (NCR) paper
identify items to check against the client sample
identify when the machine needs to be adjusted
identify machine manuals, safety and other documentation relevant to this task, where they are kept, and the information included in these documents
For Reel Systems Only
identify areas of the reel stand to monitor to ensure trouble-free operation
identify area of the web control system to adjust to maintain correct web tension
identify area of the web control system to adjust to maintain correct positioning of the web
For Sheet Systems Only
list important factors to consider when setting up the feeder and double/misfeed sheet calliper system
identify requirements to ensure smooth transportation of sheets or sections to and through the machine
name different types of sheet/section delivery systems
determine largest/smallest size sheet that can be processed on this machine
determine the largest/smallest sheet/section size to be run on the machine.