The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of the following is essential:

correctly set up a machine for basic flat-bed die cutting or embossing according to job specifications and within the production timeframe

demonstrate all safety devices on the machine

competency must be demonstrated on EITHER flat-bed die cutting OR embossing. For either process set up TWO jobs changing the type and size of substrates and design of finished patterns according to manufacturer's and job specifications, enterprise procedures and the listed Performance Criteria

demonstrate use of computerised control, monitoring and data entry systems if available and appropriate

demonstrate an ability to find and use information relevant to the task from a variety of information sources.

Context of and specific resources for assessment

Assessment must ensure:

assessment may take place on the job, off the job or a combination of these

off the job assessment must be undertaken in a closely simulated workplace environment.

Method of assessment

A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:

direct questioning combined with review of portfolios of evidence and third party workplace reports of on-the-job performance by the candidate.

Guidance information for assessment

Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example:

ICPSU201C Prepare, load and unload reels and cores on and off machine

ICPSU202C Prepare, load and unload product on and off machine

ICPSU207C Prepare machine for operation (basic)

ICPCF220C Produce basic converted or finished product.

Required skills

OHS in relation to operating machinery

communication skills when reading and interpreting job specifications and completing workplace documentation

planning by checking availability of all components and organising laboratory testing

teamwork when giving assistance during the set up of major in-line printing/binding/converting units by maintaining operations with fellow workers

using technology by adjusting the machine to facilitate accurate sheet pick-up and transportation

problem solving by interpreting test results and adjusting the machine as required

Required knowledge

information concerning die cutting or embossing would that you expect to find in the job documentation or production control system?

checked needed when mounting cutting devices on a flat-bed

checked needed when registering and proofing the cutting devices

checked needed when securing the cutting devices to the machine

criteria that determines the selection of particular cutting devices

OHS concerns that are there when setting up reel transportation systems

adjustments to the unwind reel that may be needed to suit various jobs

important areas to be considered during webbing procedures

OHS concerns that are there when setting up sheet transportation systems

important areas to check during the feeder unit set up

adjustments that can be made to the machine to facilitate accurate sheet pick-up and transportation

important areas of the reel delivery system that may need to be adjusted according to job specifications

steps that should be taken to ensure that the delivery system operates effectively

OHS factors that must be considered when setting up and/or operating machine delivery systems

areas of the delivery system that should be observed to prevent damage to the finished product

ways in which the folded sheets can be secured for dispatch

OHS factors that must be considered when setting up cutting devices

checked needed when setting up, adjusting and operating flat-bed cutting devices

machine pressure

machine cutting depths

adjustments needed to in-line units

areas that should be checked to ensure the suitability of in-line processes

details of the completed sample that should be examined to ensure conformance with the client's requirements

product testing procedures that are available and how often should they be used

common faults that can occur with the flat-bed cutting process

factors that indicate a need for the replacement of knives/blades/cutting edges

cutting edges storing to guard against damage and deterioration

machine manuals, safety and other documentation that are relevant to this task and where they are kept

information that is included in these documents

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Cutting process may include:

flat-bed die

forme cutting

embossing.

Substrate handling may include:

wide or narrow reel or large or small sheet handling systems.

Flat-bed cutting units may include:

a range of machines with dies or cutting formes and manual, semi-automated, fully automated or computerised process control.

In-line processes may include:

minor processes that are integral to this competency can include basic in-line operations such as perforating, numbering, date coding, slitting that do not in themselves constitute another defined unit of competency. Where a major in-line process is defined as a separate competency (eg flat-bed cutting, folding) it should be assessed as such.

Shapes may include:

simple or single shapes.

Substrate types may include:

range of substrates within the major categories of paper, pressure sensitive material, board, corrugated board, plastics and related films, or metal.