Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

ICPPRN332 Mapping and Delivery Guide
Produce complex lithographic printed product

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency ICPPRN332 - Produce complex lithographic printed product
Description
Employability Skills
Learning Outcomes and Application This unit describes the skills and knowledge required to produce complex lithographic printed product, ensuring an efficient non-routine production flow that maintains product quality standards.It applies to individuals who work under direct supervision and have some responsibility in ensuring production process is maintained by anticipating production problems and monitoring equipment and machinery.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Gather evidence to demonstrate consistent performance in conditions that are safe and replicate the workplace. Noise levels, production flow, interruptions and time variances must be typical of those experienced in the printing field of work and include access to:

special purpose tools, equipment and materials

lithographic printing machine.

Assessment processes and techniques must be able to be modified for distance-based learners and be culturally appropriate and suitable to the communication skill level, language, literacy and numeracy capacity of the candidate and the work being performed.

Additional support may be needed for the Indigenous community and others from a non-English speaking background.

Where applicable, physical resources should include equipment modified for people with special needs as well as assistance to support their participation in the assessment process.

Assessors must satisfy NVR/AQTF assessor requirements.

Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Maintain non-routine operation of delivery system
  • Delivery systems are monitored and adjusted to ensure efficient and continuous operation and ensure no damage to finished product
  • Substrate is added to and removed from process according to job specifications
       
Element: Maintain complex lithographic printing process
  • Non-routine lithographic plate and plate cylinder condition are monitored and adjusted to ensure quality of printed product meets the sample sheet standard
  • Non-routine lithographic blanket and blanket cylinder condition are monitored and adjusted to ensure quality of printed product meets the sample sheet standard
  • Non-routine lithographic impression cylinder condition is monitored and adjusted to ensure quality of printed product meets the sample sheet standard
  • Non-routine lithographic inking system is checked and maintained to ensure quality of printed product meets the sample sheet standard
  • Non-routine lithographic dampening system condition is monitored and adjusted to ensure quality of printed product meets the sample sheet standard
  • Set off / marking prevention and drying system is monitored and adjusted to ensure quality of printed product meets the sample sheet standard
  • Drying systems are monitored and adjusted to ensure quality of printed product meets the approved proof standard
       
Element: Maintain production process
  • Production process is operated in association with fellow workers and according to company specifications and planned daily schedule
  • Production is maintained within work health and safety (WHS) requirements and company and manufacturer’s specifications
  • Manual and/or automatic control is used as per specification
  • Performance is monitored and verified using the process control system according to enterprise procedures
  • Ink performance, colour, register and position of print are monitored and adjusted throughout production run
  • Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention
  • Process adjustments to eliminate problems are reported according to enterprise procedures
  • Faulty performance of equipment is identified and reported according to enterprise procedures
  • Waste is sorted according to enterprise procedures
       
Element: Identify and investigate lithographic machine operating problem
  • Problem in lithographic machine operation is investigated
  • Problem in lithographic machine is identified and reported according to enterprise procedures
       
Element: Rectify minor lithographic machine faults
  • Adjustments or corrections are carried out according to specified procedures and consistent with operator’s skill level
  • Lithographic machine operation is checked to ensure correct operation
       
Element: Conduct shutdown of production process
  • Correct shutdown sequence is followed according to manufacturer’s specifications and enterprise procedures
  • Shutdown is conducted in association with fellow workers and in compliance with WHS requirements
  • Unused ink is correctly labelled and stored according to manufacturer’s/supplier’s specifications and enterprise procedures
  • Solid and liquid waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures
  • All product is removed from operating area
  • Machine faults requiring repair are identified and reported to designated person according to enterprise procedures
  • Repair/adjustment is verified prior to resumption of operations
       
Element: Clean and wash up printing machine at end of print run
  • Cylinders, plate and roller surfaces are cleaned ready for next run
  • Inking system and dampening system are washed ready for next run, and liquid waste is disposed of according to company and regulatory requirements
  • In-line printing/converting/binding/finishing units are cleaned ready for next run
  • Transportation and delivery systems are disengaged and cleaned ready for next run
       
Element: Complete records
  • Production records or other documentation are accurately completed where required by enterprise procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENT

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Maintain non-routine operation of delivery system

1.1 Delivery systems are monitored and adjusted to ensure efficient and continuous operation and ensure no damage to finished product

1.2 Substrate is added to and removed from process according to job specifications

2. Maintain complex lithographic printing process

2.1 Non-routine lithographic plate and plate cylinder condition are monitored and adjusted to ensure quality of printed product meets the sample sheet standard

2.2 Non-routine lithographic blanket and blanket cylinder condition are monitored and adjusted to ensure quality of printed product meets the sample sheet standard

2.3 Non-routine lithographic impression cylinder condition is monitored and adjusted to ensure quality of printed product meets the sample sheet standard

2.4 Non-routine lithographic inking system is checked and maintained to ensure quality of printed product meets the sample sheet standard

2.5 Non-routine lithographic dampening system condition is monitored and adjusted to ensure quality of printed product meets the sample sheet standard

2.6 Set off / marking prevention and drying system is monitored and adjusted to ensure quality of printed product meets the sample sheet standard

2.7 Drying systems are monitored and adjusted to ensure quality of printed product meets the approved proof standard

3. Maintain production process

3.1 Production process is operated in association with fellow workers and according to company specifications and planned daily schedule

3.2 Production is maintained within work health and safety (WHS) requirements and company and manufacturer’s specifications

3.3 Manual and/or automatic control is used as per specification

3.4 Performance is monitored and verified using the process control system according to enterprise procedures

3.5 Ink performance, colour, register and position of print are monitored and adjusted throughout production run

3.6 Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention

3.7 Process adjustments to eliminate problems are reported according to enterprise procedures

3.8 Faulty performance of equipment is identified and reported according to enterprise procedures

3.9 Waste is sorted according to enterprise procedures

4. Identify and investigate lithographic machine operating problem

4.1 Problem in lithographic machine operation is investigated

4.2 Problem in lithographic machine is identified and reported according to enterprise procedures

5. Rectify minor lithographic machine faults

5.1 Adjustments or corrections are carried out according to specified procedures and consistent with operator’s skill level

5.2 Lithographic machine operation is checked to ensure correct operation

6. Conduct shutdown of production process

6.1 Correct shutdown sequence is followed according to manufacturer’s specifications and enterprise procedures

6.2 Shutdown is conducted in association with fellow workers and in compliance with WHS requirements

6.3 Unused ink is correctly labelled and stored according to manufacturer’s/supplier’s specifications and enterprise procedures

6.4 Solid and liquid waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures

6.5 All product is removed from operating area

6.6 Machine faults requiring repair are identified and reported to designated person according to enterprise procedures

6.7 Repair/adjustment is verified prior to resumption of operations

7. Clean and wash up printing machine at end of print run

7.1 Cylinders, plate and roller surfaces are cleaned ready for next run

7.2 Inking system and dampening system are washed ready for next run, and liquid waste is disposed of according to company and regulatory requirements

7.3 In-line printing/converting/binding/finishing units are cleaned ready for next run

7.4 Transportation and delivery systems are disengaged and cleaned ready for next run

8. Complete records

8.1 Production records or other documentation are accurately completed where required by enterprise procedures

Evidence of the ability to:

operate a lithographic press ensuring an efficient non-routine production flow that maintains product quality standards; production problems are anticipated and rectified with minimum downtime; and the machine is correctly shut down and cleaned according to work health and safety (WHS) guidelines

demonstrate use of control, monitoring and data entry systems

monitor production output and make necessary adjustments to maintain print quality on a lithographic machine while producing a complex print on TWO occasions (if possible using different types and sizes of substrates and, if possible, including at least two in-line processes) according to job specifications and enterprise procedures.

Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.

To complete the unit requirements safely and effectively, the individual must:

For reel systems only

Reel transportation and web control

explain WHS requirements for operating the reel transportation system

explain what can cause the reel to wander

describe what can cause the web to break at the unwind unit

explain the difference between a "flying paster" and "zero speed" type reel-stand

identify the print fault that results from the reel being run out of centre

list faults in the unwind section that can cause a web break

Reel delivery for rewinding and sheeting

explain WHS risks associated with rewinding

identify what safety feature is in the delivery system for when the web jams

explain why the sheet cut-off wanders

describe the effect of poorly adjusted nip rollers when rewinding and sheeting

outline further operations required for printed reels after removal from the printing machine

explain how to store the printed job after removal from the printing machine

explain why it is necessary to label each printed reel

For Sheet Systems Only

Sheet transportation and transfer system

explain WHS requirements associated with operating the sheet transportation system

explain the result of worn suckers at the feeder suction head

identify the type of two sheet detection on this machine

discuss how much movement the sheet should have when being registered by the side lay

explain possible causes of mis-register of the sheet at the feeder

explain visible signs of the sheet being registered in the feeder

explain how gripper malfunction can affect sheet control and transfer

explain when to adjust sheet transfer mechanisms

list causes of the feeder stack becoming uneven

explain what happens if the feeder stack is not loaded levelly

explain how unevenness of the feeder stack can be rectified

In-line processes

explain how consistency of the punching unit is checked

describe the outcome of excessive pressure on the slitters

describe the outcome of a dirty former

describe the outcome of defective pins in the folder

describe the outcome of adjusting rollers at the base of the former

list causes of the web jamming up in the folder

Sheet delivery

explain WHS risks associated with sheeting

describe the effect machine speed has on sheet delivery

explain advantages of spraying moving sheets with anti-set-off powder in the delivery

name items in the delivery that can mark the printed image

outline remedial steps that may be necessary to eliminate marking on the printed image

explain the function of a sheet decurler fitted to the delivery of some machines

list faults that can result from incorrectly set grippers in the transfer section of a machine

describe how the printed job should be stored after removal from the printing machine

Printing unit

explain the result if the plate develops a crack at the grip edge during a print run

explain the effect of a sticky blanket surface

list print faults that result from the blanket not being tensioned correctly

outline causes of blanket packing-creep during printing

explain how a build-up of ink on the impression cylinder can affect the printed product

describe the cause of ink lying back in the duct

list causes of ink stripping on the inking rollers

explain print faults that result from excessive use of fountain solution on the plate

describe the recommended pH range for fountain solutions

list causes of conductivity of the fountain solution changing over an eight-hour shift

outline problems caused by excessive conductivity of the fountain solutions

Drying unit

explain the link between driers and set-off and marking

identify what causes UV ink to dry

identify what causes the substrate to blister

describe what happens in the chillers if the drying temperature was too low

outline the effect of incorrect drying temperature on the finished product

Maintaining production process

explain the effect of inadequate communication within the work team

identify safety features within the organisation that help maintain effective production

explain ramifications of machine guards being removed and/or micro switches being disconnected on a machine

identify who is held legally responsible for the removal of machine guards and/or disconnection of micro switches

explain disadvantages of using a closed looped system for automatic control of the printed product

describe what other measurements besides optimum solid ink density can be measured to assess print quality

outline the most accurate method of checking register during a production run

explain why it is important to take immediate action when production problems are anticipated

explain what action is taken to eliminate further processing of unacceptable printed product

outline the effect of increases in relative humidity in the press room

explain the procedure to care for a newly delivered skid of paper to the press room

explain why waste should be sorted and the advantages of keeping reusable waste

explain industry standards to enhance effective communication with the client

discuss necessary procedures the client should follow to OK a printed product

Lithographic machine operating problems

explain when it is necessary to call service personnel to correct a machine problem

identify enterprise procedures in place to report any machine operating problems

Shutdown procedures

list advantages of proper labelling and storage of excess inks and materials

explain why printed product must be clearly labelled prior to removal from the press room

Cleaning and washing the printing unit

explain work health and safety (WHS) requirements for handling ink

explain safety precautions for cleaning the printing cylinders

describe the washing procedure for offset rubber blanket

determine how plates can be stored to minimise damage

Cleaning feed, transportation, delivery and in line sections

explain WHS precautions for cleaning these sections of the machine

Completing production records

explain how completed records are used in the final analysis of the job

outline benefits of comprehensive records when considering the production of future jobs

Information sources

identify machine manuals, safety and other documentation relevant to this task, where they are kept and the information contained.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENT

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Maintain non-routine operation of delivery system

1.1 Delivery systems are monitored and adjusted to ensure efficient and continuous operation and ensure no damage to finished product

1.2 Substrate is added to and removed from process according to job specifications

2. Maintain complex lithographic printing process

2.1 Non-routine lithographic plate and plate cylinder condition are monitored and adjusted to ensure quality of printed product meets the sample sheet standard

2.2 Non-routine lithographic blanket and blanket cylinder condition are monitored and adjusted to ensure quality of printed product meets the sample sheet standard

2.3 Non-routine lithographic impression cylinder condition is monitored and adjusted to ensure quality of printed product meets the sample sheet standard

2.4 Non-routine lithographic inking system is checked and maintained to ensure quality of printed product meets the sample sheet standard

2.5 Non-routine lithographic dampening system condition is monitored and adjusted to ensure quality of printed product meets the sample sheet standard

2.6 Set off / marking prevention and drying system is monitored and adjusted to ensure quality of printed product meets the sample sheet standard

2.7 Drying systems are monitored and adjusted to ensure quality of printed product meets the approved proof standard

3. Maintain production process

3.1 Production process is operated in association with fellow workers and according to company specifications and planned daily schedule

3.2 Production is maintained within work health and safety (WHS) requirements and company and manufacturer’s specifications

3.3 Manual and/or automatic control is used as per specification

3.4 Performance is monitored and verified using the process control system according to enterprise procedures

3.5 Ink performance, colour, register and position of print are monitored and adjusted throughout production run

3.6 Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention

3.7 Process adjustments to eliminate problems are reported according to enterprise procedures

3.8 Faulty performance of equipment is identified and reported according to enterprise procedures

3.9 Waste is sorted according to enterprise procedures

4. Identify and investigate lithographic machine operating problem

4.1 Problem in lithographic machine operation is investigated

4.2 Problem in lithographic machine is identified and reported according to enterprise procedures

5. Rectify minor lithographic machine faults

5.1 Adjustments or corrections are carried out according to specified procedures and consistent with operator’s skill level

5.2 Lithographic machine operation is checked to ensure correct operation

6. Conduct shutdown of production process

6.1 Correct shutdown sequence is followed according to manufacturer’s specifications and enterprise procedures

6.2 Shutdown is conducted in association with fellow workers and in compliance with WHS requirements

6.3 Unused ink is correctly labelled and stored according to manufacturer’s/supplier’s specifications and enterprise procedures

6.4 Solid and liquid waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures

6.5 All product is removed from operating area

6.6 Machine faults requiring repair are identified and reported to designated person according to enterprise procedures

6.7 Repair/adjustment is verified prior to resumption of operations

7. Clean and wash up printing machine at end of print run

7.1 Cylinders, plate and roller surfaces are cleaned ready for next run

7.2 Inking system and dampening system are washed ready for next run, and liquid waste is disposed of according to company and regulatory requirements

7.3 In-line printing/converting/binding/finishing units are cleaned ready for next run

7.4 Transportation and delivery systems are disengaged and cleaned ready for next run

8. Complete records

8.1 Production records or other documentation are accurately completed where required by enterprise procedures

This section specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.

Delivery systems MUST include EITHER:

reel

OR

sheet

Monitoring and adjusting MUST include EITHER:

reel stand and rewind sections

web control system

sheeting section

set off / marking prevention systems

OR

feeder and delivery systems

sheet pick-up and transportation system

transfer systems

set/ off/marking prevention system

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Delivery systems are monitored and adjusted to ensure efficient and continuous operation and ensure no damage to finished product 
Substrate is added to and removed from process according to job specifications 
Non-routine lithographic plate and plate cylinder condition are monitored and adjusted to ensure quality of printed product meets the sample sheet standard 
Non-routine lithographic blanket and blanket cylinder condition are monitored and adjusted to ensure quality of printed product meets the sample sheet standard 
Non-routine lithographic impression cylinder condition is monitored and adjusted to ensure quality of printed product meets the sample sheet standard 
Non-routine lithographic inking system is checked and maintained to ensure quality of printed product meets the sample sheet standard 
Non-routine lithographic dampening system condition is monitored and adjusted to ensure quality of printed product meets the sample sheet standard 
Set off / marking prevention and drying system is monitored and adjusted to ensure quality of printed product meets the sample sheet standard 
Drying systems are monitored and adjusted to ensure quality of printed product meets the approved proof standard 
Production process is operated in association with fellow workers and according to company specifications and planned daily schedule 
Production is maintained within work health and safety (WHS) requirements and company and manufacturer’s specifications 
Manual and/or automatic control is used as per specification 
Performance is monitored and verified using the process control system according to enterprise procedures 
Ink performance, colour, register and position of print are monitored and adjusted throughout production run 
Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention 
Process adjustments to eliminate problems are reported according to enterprise procedures 
Faulty performance of equipment is identified and reported according to enterprise procedures 
Waste is sorted according to enterprise procedures 
Problem in lithographic machine operation is investigated 
Problem in lithographic machine is identified and reported according to enterprise procedures 
Adjustments or corrections are carried out according to specified procedures and consistent with operator’s skill level 
Lithographic machine operation is checked to ensure correct operation 
Correct shutdown sequence is followed according to manufacturer’s specifications and enterprise procedures 
Shutdown is conducted in association with fellow workers and in compliance with WHS requirements 
Unused ink is correctly labelled and stored according to manufacturer’s/supplier’s specifications and enterprise procedures 
Solid and liquid waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures 
All product is removed from operating area 
Machine faults requiring repair are identified and reported to designated person according to enterprise procedures 
Repair/adjustment is verified prior to resumption of operations 
Cylinders, plate and roller surfaces are cleaned ready for next run 
Inking system and dampening system are washed ready for next run, and liquid waste is disposed of according to company and regulatory requirements 
In-line printing/converting/binding/finishing units are cleaned ready for next run 
Transportation and delivery systems are disengaged and cleaned ready for next run 
Production records or other documentation are accurately completed where required by enterprise procedures 

Forms

Assessment Cover Sheet

ICPPRN332 - Produce complex lithographic printed product
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

ICPPRN332 - Produce complex lithographic printed product

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: