Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

ICPSCP271 Mapping and Delivery Guide
Manually produce basic screen prints

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency ICPSCP271 - Manually produce basic screen prints
Description
Employability Skills
Learning Outcomes and Application This unit describes the skills and knowledge required to manually produce one or two colour screen prints in short runs or limited art prints.It applies to individuals working under direct supervision and performing mainly routine tasks such as monitoring equipment, selecting appropriate products and ensuring set processes are followed.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Gather evidence to demonstrate consistent performance in conditions that are safe and replicate the workplace. Noise levels, production flow, interruptions and time variances must be typical of those experienced in the screen printing field of work and include access to cleaning chemicals and manual screen printing machines.

Assessors must satisfy NVR/AQTF assessor requirements.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Load substrate
  • Substrate is checked against job specifications with any irregularities reported and, where possible, rectified
  • Substrate position and stencil registration are adjusted according to job specifications
       
Element: Apply ink to screen
  • Ink is applied to screen in quantity required for screen size
  • Equipment is kept clean and spills are minimised
  • Ink is checked against job specifications
       
Element: Produce proof print
  • Proof print is run off and checked for colour, strength, registration, adhesion, clarity, gloss level, drying or curing, artwork detail and other technical aspects according to job specifications
  • Adjustments are made as required
  • Appropriate approval to commence production is sought prior to commencement
  • Belt speed and energy required are set to achieve desired curing or drying properties
       
Element: Run job and monitor print quality
  • Printing speed production is adjusted to maximise quality and output
  • Print quality is continuously evaluated and adjusted as required
  • Effects of ink alterations during run are monitored and any discrepancy is notified according to enterprise procedures
  • Workplace documentation is completed as required
  • Curing and drying are constantly monitored and adjusted according to manufacturer or supplier and job specifications
       
Element: Carry out routine user maintenance
  • Equipment is cleaned according to enterprise procedures
  • Fault conditions are identified and reported according to enterprise procedures
       
Element: Stack production output
  • Output is checked for thorough drying or curing before stacking
  • Job status and progress are checked against job specifications and any necessary action is taken
       
Element: Finish operation
  • Excess ink, screens, squeegees and flood coaters are removed and cleaned according to work health and safety (WHS) requirements and manufacturer or supplier specifications
  • Waste materials are disposed of according to manufacturer or supplier specifications, regulatory requirements and enterprise procedures
  • Equipment and surrounding areas are cleaned according to manufacturer or supplier specifications and enterprise procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENT

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1 Load substrate

1.1 Substrate is checked against job specifications with any irregularities reported and, where possible, rectified

1.2 Substrate position and stencil registration are adjusted according to job specifications

2 Apply ink to screen

2.1 Ink is applied to screen in quantity required for screen size

2.2 Equipment is kept clean and spills are minimised

2.3 Ink is checked against job specifications

3 Produce proof print

3.1 Proof print is run off and checked for colour, strength, registration, adhesion, clarity, gloss level, drying or curing, artwork detail and other technical aspects according to job specifications

3.2 Adjustments are made as required

3.3 Appropriate approval to commence production is sought prior to commencement

3.4 Belt speed and energy required are set to achieve desired curing or drying properties

4 Run job and monitor print quality

4.1 Printing speed production is adjusted to maximise quality and output

4.2 Print quality is continuously evaluated and adjusted as required

4.3 Effects of ink alterations during run are monitored and any discrepancy is notified according to enterprise procedures

4.4 Workplace documentation is completed as required

4.5 Curing and drying are constantly monitored and adjusted according to manufacturer or supplier and job specifications

5 Carry out routine user maintenance

5.1 Equipment is cleaned according to enterprise procedures

5.2 Fault conditions are identified and reported according to enterprise procedures

6 Stack production output

6.1 Output is checked for thorough drying or curing before stacking

6.2 Job status and progress are checked against job specifications and any necessary action is taken

7 Finish operation

7.1 Excess ink, screens, squeegees and flood coaters are removed and cleaned according to work health and safety (WHS) requirements and manufacturer or supplier specifications

7.2 Waste materials are disposed of according to manufacturer or supplier specifications, regulatory requirements and enterprise procedures

7.3 Equipment and surrounding areas are cleaned according to manufacturer or supplier specifications and enterprise procedures

Evidence of the ability to:

manually produce TWO different one or two colour print runs according to job specifications, enterprise procedures and work health and safety (WHS) requirements.

Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.

To complete the unit requirements safely and effectively, the individual must:

identify health and safety issues that apply when producing a manual print

outline the procedure for setting up the frame relative to the position of the print image and base board

describe the checks to be made of the ink to determine its suitability for printing on a particular substrate

describe the checks to be made on the printed sheet when the proof print has been run off

describe the system used for drying or curing

explain how to determine whether a print is dried or cured prior to stacking

outline the maintenance requirements for equipment or machinery used to produce manual prints

explain how to clean up and dispose of waste materials used in the production of manual prints

identify required manuals, safety and other documentation and briefly outline the relevant information in each source.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENT

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1 Load substrate

1.1 Substrate is checked against job specifications with any irregularities reported and, where possible, rectified

1.2 Substrate position and stencil registration are adjusted according to job specifications

2 Apply ink to screen

2.1 Ink is applied to screen in quantity required for screen size

2.2 Equipment is kept clean and spills are minimised

2.3 Ink is checked against job specifications

3 Produce proof print

3.1 Proof print is run off and checked for colour, strength, registration, adhesion, clarity, gloss level, drying or curing, artwork detail and other technical aspects according to job specifications

3.2 Adjustments are made as required

3.3 Appropriate approval to commence production is sought prior to commencement

3.4 Belt speed and energy required are set to achieve desired curing or drying properties

4 Run job and monitor print quality

4.1 Printing speed production is adjusted to maximise quality and output

4.2 Print quality is continuously evaluated and adjusted as required

4.3 Effects of ink alterations during run are monitored and any discrepancy is notified according to enterprise procedures

4.4 Workplace documentation is completed as required

4.5 Curing and drying are constantly monitored and adjusted according to manufacturer or supplier and job specifications

5 Carry out routine user maintenance

5.1 Equipment is cleaned according to enterprise procedures

5.2 Fault conditions are identified and reported according to enterprise procedures

6 Stack production output

6.1 Output is checked for thorough drying or curing before stacking

6.2 Job status and progress are checked against job specifications and any necessary action is taken

7 Finish operation

7.1 Excess ink, screens, squeegees and flood coaters are removed and cleaned according to work health and safety (WHS) requirements and manufacturer or supplier specifications

7.2 Waste materials are disposed of according to manufacturer or supplier specifications, regulatory requirements and enterprise procedures

7.3 Equipment and surrounding areas are cleaned according to manufacturer or supplier specifications and enterprise procedures

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Substrate is checked against job specifications with any irregularities reported and, where possible, rectified 
Substrate position and stencil registration are adjusted according to job specifications 
Ink is applied to screen in quantity required for screen size 
Equipment is kept clean and spills are minimised 
Ink is checked against job specifications 
Proof print is run off and checked for colour, strength, registration, adhesion, clarity, gloss level, drying or curing, artwork detail and other technical aspects according to job specifications 
Adjustments are made as required 
Appropriate approval to commence production is sought prior to commencement 
Belt speed and energy required are set to achieve desired curing or drying properties 
Printing speed production is adjusted to maximise quality and output 
Print quality is continuously evaluated and adjusted as required 
Effects of ink alterations during run are monitored and any discrepancy is notified according to enterprise procedures 
Workplace documentation is completed as required 
Curing and drying are constantly monitored and adjusted according to manufacturer or supplier and job specifications 
Equipment is cleaned according to enterprise procedures 
Fault conditions are identified and reported according to enterprise procedures 
Output is checked for thorough drying or curing before stacking 
Job status and progress are checked against job specifications and any necessary action is taken 
Excess ink, screens, squeegees and flood coaters are removed and cleaned according to work health and safety (WHS) requirements and manufacturer or supplier specifications 
Waste materials are disposed of according to manufacturer or supplier specifications, regulatory requirements and enterprise procedures 
Equipment and surrounding areas are cleaned according to manufacturer or supplier specifications and enterprise procedures 

Forms

Assessment Cover Sheet

ICPSCP271 - Manually produce basic screen prints
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

ICPSCP271 - Manually produce basic screen prints

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: