Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

ICTPMG201 Mapping and Delivery Guide
Prepare site for support installation

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency ICTPMG201 - Prepare site for support installation
Description
Employability Skills
Learning Outcomes and Application This unit describes the skills and knowledge required to prepare a site for support installation for aerial or underground cable, or for erection of radio towers or above ground or underground equipment enclosures.It applies to individuals who can apply a broad range of competencies in a varied work context from installation to operation of telecommunications equipment and products.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Gather evidence to demonstrate consistent performance in conditions that are safe and replicate the workplace. Noise levels, production flow, interruptions and time variances must be typical of those experienced in the telecommunications – project management field of work and include access to:

sites on which installations can be performed

equipment and personal protective equipment

relevant regulatory, organisational and equipment documentation.

Assessors of this unit must satisfy the requirements for assessors in applicable vocational education and training legislation, frameworks and/or standards.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for installation
  • Confirm location of proposed installation is according to installation plan and relevant legislation, codes, regulations and standards
  • Recognise and report hazards
  • Obtain approvals and authorisations for work, and carry at all times during works
  • Inform landowner or tenant of imminent works
  • Locate adjoining services according to enterprise guidelines and work health and safety (WHS) practices
  • Clear site of vegetation and debris according to work specifications and any relevant approvals
       
Element: Excavate site
  • Place pegs for proposed installation according to enterprise guidelines and site plans
  • Excavate using appropriate equipment for size of excavation and location of works, according to enterprise guidelines
  • Conduct levelling of site within tolerance specified in installation plan
  • Employ WHS practices and personal protective equipment, where appropriate, in manner intended by manufacturer
       
Element: Complete administration
  • Note approved alterations on original plan and design using appropriate symbols, and return plan to originator
  • Complete and sign reports according to enterprise policy where required
  • Inform landowner or tenant of construction completion and expected next steps according to enterprise guidelines
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Prepare for installation

1.1 Confirm location of proposed installation is according to installation plan and relevant legislation, codes, regulations and standards

1.2 Recognise and report hazards

1.3 Obtain approvals and authorisations for work, and carry at all times during works

1.4 Inform landowner or tenant of imminent works

1.5 Locate adjoining services according to enterprise guidelines and work health and safety (WHS) practices

1.6 Clear site of vegetation and debris according to work specifications and any relevant approvals

2. Excavate site

2.1 Place pegs for proposed installation according to enterprise guidelines and site plans

2.2 Excavate using appropriate equipment for size of excavation and location of works, according to enterprise guidelines

2.3 Conduct levelling of site within tolerance specified in installation plan

2.4 Employ WHS practices and personal protective equipment, where appropriate, in manner intended by manufacturer

3. Complete administration

3.1 Note approved alterations on original plan and design using appropriate symbols, and return plan to originator

3.2 Complete and sign reports according to enterprise policy where required

3.3 Inform landowner or tenant of construction completion and expected next steps according to enterprise guidelines

Evidence of the ability to:

prepare and clear site for installation

measure and peg out excavation location and levels

safely excavate site

obtain sign off, complete reports and record variations to plans.

Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.

To complete the unit requirements safely and effectively, the individual must:

identify construction methods and performance requirements

outline the features and operating requirements of construction equipment

identify legislation, codes of practice and other formal agreements that impact on the work activity

identify manufacturer requirements for safe operation of equipment

identify specific work health and safety (WHS) requirements relating to the activity and site conditions

describe the levelling and measuring procedures for marking out an excavation

identify and describe the operation of tools and equipment suitable for site preparation and excavation

explain typical issues and challenges that occur on site

discuss the communications strategies required when dealing with landowners and tenants.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Prepare for installation

1.1 Confirm location of proposed installation is according to installation plan and relevant legislation, codes, regulations and standards

1.2 Recognise and report hazards

1.3 Obtain approvals and authorisations for work, and carry at all times during works

1.4 Inform landowner or tenant of imminent works

1.5 Locate adjoining services according to enterprise guidelines and work health and safety (WHS) practices

1.6 Clear site of vegetation and debris according to work specifications and any relevant approvals

2. Excavate site

2.1 Place pegs for proposed installation according to enterprise guidelines and site plans

2.2 Excavate using appropriate equipment for size of excavation and location of works, according to enterprise guidelines

2.3 Conduct levelling of site within tolerance specified in installation plan

2.4 Employ WHS practices and personal protective equipment, where appropriate, in manner intended by manufacturer

3. Complete administration

3.1 Note approved alterations on original plan and design using appropriate symbols, and return plan to originator

3.2 Complete and sign reports according to enterprise policy where required

3.3 Inform landowner or tenant of construction completion and expected next steps according to enterprise guidelines

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Confirm location of proposed installation is according to installation plan and relevant legislation, codes, regulations and standards 
Recognise and report hazards 
Obtain approvals and authorisations for work, and carry at all times during works 
Inform landowner or tenant of imminent works 
Locate adjoining services according to enterprise guidelines and work health and safety (WHS) practices 
Clear site of vegetation and debris according to work specifications and any relevant approvals 
Place pegs for proposed installation according to enterprise guidelines and site plans 
Excavate using appropriate equipment for size of excavation and location of works, according to enterprise guidelines 
Conduct levelling of site within tolerance specified in installation plan 
Employ WHS practices and personal protective equipment, where appropriate, in manner intended by manufacturer 
Note approved alterations on original plan and design using appropriate symbols, and return plan to originator 
Complete and sign reports according to enterprise policy where required 
Inform landowner or tenant of construction completion and expected next steps according to enterprise guidelines 

Forms

Assessment Cover Sheet

ICTPMG201 - Prepare site for support installation
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

ICTPMG201 - Prepare site for support installation

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: