Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

ICTSAS307 Mapping and Delivery Guide
Install, configure and secure a small office or home office network

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency ICTSAS307 - Install, configure and secure a small office or home office network
Description
Employability Skills
Learning Outcomes and Application This unit describes the skills and knowledge required to identify available network components relevant to client requirements and to install, configure and secure those components as part of a small office or home office (SOHO) network.It applies to individuals who work under a level of supervision and have experience with analysis and problem solving when working with technologies.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Gather evidence to demonstrate consistent performance in conditions that are safe and replicate the workplace. Noise levels, production flow, interruptions and time variances must be typical of those experienced in the systems administration and support field of work and include access to:

current industry standard software, hardware, and networking technologies

server and workstation hardware and software

internet connection

live network

network components, hardware and software

networked computers

vendor hardware and software components

technical documentation and installation manuals.

Assessors must satisfy NVR/AQTF assessor requirements.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Confirm client requirements and identify relevant network equipment
  • Identify and clarify client requirements for the small office home office network
  • Identify most suitable network design to meet client requirements
  • Develop and document network design
  • Identify most suitable network technologies, devices and protocols and network cables and connectors to meet network design
  • Review available network technologies, devices and protocols and determine the most appropriate to meet client requirements
  • Source vendors and service suppliers to obtain specifications, availability and cost of identified components
  • Ensure client sign-off for proposed network design and associated components
       
Element: Install and configure hardware and software
  • Develop installation plans with prioritised tasks and contingency arrangements for installation of components with minimum disruption to client
  • Liaise with appropriate person to obtain approval for plans, including security clearance and timing
  • Confirm and review supplier documentation that network cables and connectors have been installed according to industry standards, client requirements and building requirements
  • Install and configure computer and other hardware according to network design and industry standards, using knowledge of relevant installation and configuration tools
  • Install and configure network software according to network design and industry standards
  • Install and configure other software according to network design and industry standards
       
Element: Configure and test network
  • Troubleshoot client-side connectivity using appropriate networking settings to review relevant network tools
  • Test installed software and hardware, using available networking tools to ensure components function as expected
  • Test network settings to ensure network is functioning according to specification
  • Resolve problems identified in testing process
       
Element: Secure network
  • Identify possible security concepts and technologies relevant to securing the network
  • Apply specific protection using identified security features to protect against possible network attacks
  • Troubleshoot different types of security intrusion symptoms and issues
       
Element: Document completed work, hand over to client and obtain client approval
  • Document final network design and associated hardware, software and security features
  • Document installation, boot up and configuration procedures as per client requirements
  • Complete handover and secure sign-off from client
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENT

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Confirm client requirements and identify relevant network equipment

1.1 Identify and clarify client requirements for the small office home office network

1.2 Identify most suitable network design to meet client requirements

1.3 Develop and document network design

1.4 Identify most suitable network technologies, devices and protocols and network cables and connectors to meet network design

1.5 Review available network technologies, devices and protocols and determine the most appropriate to meet client requirements

1.6 Source vendors and service suppliers to obtain specifications, availability and cost of identified components

1.7 Ensure client sign-off for proposed network design and associated components

2. Install and configure hardware and software

2.1 Develop installation plans with prioritised tasks and contingency arrangements for installation of components with minimum disruption to client

2.2 Liaise with appropriate person to obtain approval for plans, including security clearance and timing

2.3 Confirm and review supplier documentation that network cables and connectors have been installed according to industry standards, client requirements and building requirements

2.4 Install and configure computer and other hardware according to network design and industry standards, using knowledge of relevant installation and configuration tools

2.5 Install and configure network software according to network design and industry standards

2.6 Install and configure other software according to network design and industry standards

3. Configure and test network

3.1 Troubleshoot client-side connectivity using appropriate networking settings to review relevant network tools

3.2 Test installed software and hardware, using available networking tools to ensure components function as expected

3.3 Test network settings to ensure network is functioning according to specification

3.4 Resolve problems identified in testing process

4. Secure network

4.1 Identify possible security concepts and technologies relevant to securing the network

4.2 Apply specific protection using identified security features to protect against possible network attacks

4.3 Troubleshoot different types of security intrusion symptoms and issues

5. Document completed work, hand over to client and obtain client approval

5.1 Document final network design and associated hardware, software and security features

5.2 Document installation, boot up and configuration procedures as per client requirements

5.3 Complete handover and secure sign-off from client

Evidence of the ability to:

identify the most suitable network hardware and software equipment to meet client requirements

install, configure and test the network according to client requirements, and produce appropriate documentation

identify possible security threats and secure the network.

Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.

To complete the unit requirements safely and effectively, the individual must:

identify current industry accepted hardware and software products, including those used for networks

identify data and voice transmission technologies and protocols

identify hardware and software installation procedures

describe local area network (LAN) capabilities and characteristics, including:

network types

internet protocol addressing

switch and hub operation

describe network connections, both wired and wireless

describe networking technologies, including network operating systems and cabling standards

describe network operating systems and their basic installation procedures for small office applications

summarise set-up and configuration procedures

summarise security implications for a home office network

describe the methods to secure a home network

identify small business and home office networking requirements

identify software packages supported by the organisation

identify and describe the industry standards applicable to small networks.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENT

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Confirm client requirements and identify relevant network equipment

1.1 Identify and clarify client requirements for the small office home office network

1.2 Identify most suitable network design to meet client requirements

1.3 Develop and document network design

1.4 Identify most suitable network technologies, devices and protocols and network cables and connectors to meet network design

1.5 Review available network technologies, devices and protocols and determine the most appropriate to meet client requirements

1.6 Source vendors and service suppliers to obtain specifications, availability and cost of identified components

1.7 Ensure client sign-off for proposed network design and associated components

2. Install and configure hardware and software

2.1 Develop installation plans with prioritised tasks and contingency arrangements for installation of components with minimum disruption to client

2.2 Liaise with appropriate person to obtain approval for plans, including security clearance and timing

2.3 Confirm and review supplier documentation that network cables and connectors have been installed according to industry standards, client requirements and building requirements

2.4 Install and configure computer and other hardware according to network design and industry standards, using knowledge of relevant installation and configuration tools

2.5 Install and configure network software according to network design and industry standards

2.6 Install and configure other software according to network design and industry standards

3. Configure and test network

3.1 Troubleshoot client-side connectivity using appropriate networking settings to review relevant network tools

3.2 Test installed software and hardware, using available networking tools to ensure components function as expected

3.3 Test network settings to ensure network is functioning according to specification

3.4 Resolve problems identified in testing process

4. Secure network

4.1 Identify possible security concepts and technologies relevant to securing the network

4.2 Apply specific protection using identified security features to protect against possible network attacks

4.3 Troubleshoot different types of security intrusion symptoms and issues

5. Document completed work, hand over to client and obtain client approval

5.1 Document final network design and associated hardware, software and security features

5.2 Document installation, boot up and configuration procedures as per client requirements

5.3 Complete handover and secure sign-off from client

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Identify and clarify client requirements for the small office home office network 
Identify most suitable network design to meet client requirements 
Develop and document network design 
Identify most suitable network technologies, devices and protocols and network cables and connectors to meet network design 
Review available network technologies, devices and protocols and determine the most appropriate to meet client requirements 
Source vendors and service suppliers to obtain specifications, availability and cost of identified components 
Ensure client sign-off for proposed network design and associated components 
Develop installation plans with prioritised tasks and contingency arrangements for installation of components with minimum disruption to client 
Liaise with appropriate person to obtain approval for plans, including security clearance and timing 
Confirm and review supplier documentation that network cables and connectors have been installed according to industry standards, client requirements and building requirements 
Install and configure computer and other hardware according to network design and industry standards, using knowledge of relevant installation and configuration tools 
Install and configure network software according to network design and industry standards 
Install and configure other software according to network design and industry standards 
Troubleshoot client-side connectivity using appropriate networking settings to review relevant network tools 
Test installed software and hardware, using available networking tools to ensure components function as expected 
Test network settings to ensure network is functioning according to specification 
Resolve problems identified in testing process 
Identify possible security concepts and technologies relevant to securing the network 
Apply specific protection using identified security features to protect against possible network attacks 
Troubleshoot different types of security intrusion symptoms and issues 
Document final network design and associated hardware, software and security features 
Document installation, boot up and configuration procedures as per client requirements 
Complete handover and secure sign-off from client 

Forms

Assessment Cover Sheet

ICTSAS307 - Install, configure and secure a small office or home office network
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

ICTSAS307 - Install, configure and secure a small office or home office network

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: