Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

ICTTC102D Mapping and Delivery Guide
Repair communication system faults

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency ICTTC102D - Repair communication system faults
Description This unit applies to all telecommunications applications including telephony, wireless, data, video and multi media.This unit applies to repairs to equipment covering re-calibrate, adjust, and/or replace hardware.This unit applies to computer systems including Local Area Networks (LANs) and Wide Area Networks (WANs).No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.This unit applies to all telecommunications applications including telephony, wireless, data, video and multi media.This unit applies to repairs to equipment covering re-calibrate, adjust, and/or replace hardware.This unit applies to computer systems including Local Area Networks (LANs) and Wide Area Networks (WANs).No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Employability Skills This unit contains employability skills.This unit contains employability skills.
Learning Outcomes and Application Not applicable.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites NilNil
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for equipment repairs
  • Where equipment is located on premises not owned by enterprise, appropriate consultation is undertaken in accordance with enterprise policy
  • Warranties and service agreements are checked to establish if any identified repair / alteration requirement is covered by such documents
  • The need for replacement or repair is assessed or confirmed in accordance with enterprise guidelines, site requirements and type of equipment
  • Any required additional skills are identified and assistance arranged as appropriate
  • Site access and security arrangements are made where required
  • Customers and / or other affected parties are notified of works to be undertaken
  • Occupational health and safety legislation, enterprise procedures and site specific safety requirements are observed
  • Repair equipment is obtained, and materials are ordered to be on site at the required time
  • Electronic equipment is taken out of commission for repair or replacement
       
Element: Re-calibrate electronic equipment
  • Electronic equipment settings are ascertained from manufacturer's instructions
  • Electronic equipment is re-calibrated to accord with pre-set readings
  • Electronic equipment is functionally tested and, where necessary, cut back into commission and retested
       
Element: Adjust electronic equipment
  • Nature and extent of required adjustment is re-checked
  • Adjustments are made to electronic equipment as determined and within manufacturer's guidelines
  • Electronic equipment is functionally tested and, where necessary, cut back into commission and retested
       
Element: Replace hardware
  • Tools required for the repair or replacement are selected and obtained
  • Any replacement of parts or equipment is compatible with existing parts and equipment
  • Repair or replacement is undertaken in accordance with manufacturer's specifications
  • Electronic equipment is functionally tested and, where necessary, cut back into commission and retested
       
Element: Complete works on site
  • All appropriate records are completed, signed, and stored in accordance with enterprise guidelines
  • Any changes to equipment are clearly noted on the appropriate records and stored in accordance with enterprise guidelines
  • All tools and equipment are cleaned, adjusted and stored in accordance with enterprise guidelines and manufacturer's specifications
  • Waste and debris are removed from worksite and disposed of in accordance with environmental requirements and enterprise guidelines
  • All parties notified prior to works are notified of fault repair in accordance with enterprise guidelines
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of the following is essential:

Repair of fault and conduct of tests to verify outcomes.

Documentation of fault including: nature, location, likely causes, repair methodology.

Application of enterprise escalation and outage procedures.

Calibration or re-calibration of equipment.

Adjustment of equipment.

Hardware replacement.

Ability to prioritise, operate in a timely manner and report progress.

Recognition of potential causes.

Ability to read, interpret and use equipment/system manuals and specifications and relevant enterprise policy and documentation.

Interpersonal skills related to customers, employer, work associates, team members, individuals and other contractors.

Application of all related occupational health and safety requirements and work practices.

Customer focus and consideration of customer needs.

Context of and specific resources for assessment

Assessment must ensure:

A workplace conducting the operations covered by this competency unit, equipment and resources relevant to the context of the work (See Range Statement) and support from a competent supervisor or mentor.

OR

A simulated environment with similar provisions which conforms to the Assessment Guidelines.

Guidance information for assessment

Access must be provided to appropriate learning and assessment support when required.

Assessment processes and techniques must be culturally appropriate, and appropriate to the oral communication skill level, and language and literacy capacity of the candidate and the work being performed.

In all cases where practical assessment is used it will be combined with targeted questioning to assess underpinning knowledge.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

Select from the following list to suit the learning and assessment context

Codes refer to the Skills and Knowledge Register in Volume 3 of this Training Package that has detailed content guidelines for each code outlined.

CI410 Communication 4

CO410 Computer Skills 4

EL420 Impedance Matching 4

EN420 Enterprise Information Systems 4

EN450 Enterprise Policy and Practice

MA210 Basic Telecommunications Mathematics

OH410 Occupational Health and Safety 4

PK410 Product Knowledge 4

PR410 Problem Solving 4

PS410 Plans and Specifications 4

RA420 Radio Frequency Theory and Hazards 4

RE235 Regulations for CAN

RE310 Working on Non-enterprise Land 3

SU470 Project Management 4

TE410 Basic Telephony 4

TF310 Test Equipment 3

TF320 Test Analysis and Diagnosis 3

TF410 Test Equipment 4

TF430 Fault Finding 4

TO310 Use of Tools 3

TO320 Anti-static Procedures 3

TO330 Installation Practices 3

TO410 Use of Tools 4

TR310 Basic Transmission Theory

Computer Systems

The following relate specifically to the Computer Systems group of qualifications

CN421 Installing And Managing A Graphical User Interface

CN422 Configuring And Optimising A Graphical User Interface

CN430 Digital Electronics 1

CN431 Digital Electronics 2

CN435 Digital And Computer Systems

CN440 Database Fundamentals

CN460 Fault-Finding And Diagnostic Skills

Required knowledge

The relevant required knowledge is articulated in the above guidelines contained in the Skills and Knowledge Register included in this Training Package.

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Systems

Can include telephony networks, data networks, computer systems including Local Area Networks (LANs) and Wide Area Networks (WANs)

Adjustments required

May include programming change, different calibration setting, movement of hardware / connections

Checks / tests made

May include visual check, functional test, aural test

Consultation regarding maintenance procedures

May include discussions regarding: time, location, duration, nature of works, access arrangements

Customer

May not need to be notified of repair if fault report did not originate from customer

Equipment on which fault may occur

Includes: line conditioning, optic transceiver, multiplexer, concentrator, antenna, radio system, transmission equipment, switching equipment, satellite receiver

Faults

May be identified during initial installation or when a system is operational

May be reported by: customers, system managers, information technology managers / operators, building owners, enterprise technicians, alarm information systems

Industry standards

May include: enterprise codes of practice, ACMA and Spectrum Management Authority standards, Manufacturer's specifications

Manufacturer's specifications

May be found in: printed instruction leaflets, pre printed on materials or product packaging

Methods for fault finding

Include: equipment testing, visual inspections, component replacement

Permits

May be required and may relate to the following: heritage, environment, restricted area, quarantined areas

Reason for repair

May include: broken casing, intermittent electronic failure, operation out of specifications

Records

May be stored on either enterprise or customer premises and at equipment site or central enterprise location

Suitability of test equipment

May include: Equipment calibration certification is current to reduce possibility of unreliable test data and ensure traceability

Tools

May include: hand tools, manufacturer's tool, personal computer

Variables that impact on equipment or system faults

May include: recent additions to system, building works, power supply, software problems, time of fault, atmospheric/environmental conditions

Relevant legislation, codes, regulations and standards may include:

Australian Standards

Australian Building Codes and Regulations

Occupational Health and Safety

Environmental protection

Heritage legislation

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Where equipment is located on premises not owned by enterprise, appropriate consultation is undertaken in accordance with enterprise policy 
Warranties and service agreements are checked to establish if any identified repair / alteration requirement is covered by such documents 
The need for replacement or repair is assessed or confirmed in accordance with enterprise guidelines, site requirements and type of equipment 
Any required additional skills are identified and assistance arranged as appropriate 
Site access and security arrangements are made where required 
Customers and / or other affected parties are notified of works to be undertaken 
Occupational health and safety legislation, enterprise procedures and site specific safety requirements are observed 
Repair equipment is obtained, and materials are ordered to be on site at the required time 
Electronic equipment is taken out of commission for repair or replacement 
Electronic equipment settings are ascertained from manufacturer's instructions 
Electronic equipment is re-calibrated to accord with pre-set readings 
Electronic equipment is functionally tested and, where necessary, cut back into commission and retested 
Nature and extent of required adjustment is re-checked 
Adjustments are made to electronic equipment as determined and within manufacturer's guidelines 
Electronic equipment is functionally tested and, where necessary, cut back into commission and retested 
Tools required for the repair or replacement are selected and obtained 
Any replacement of parts or equipment is compatible with existing parts and equipment 
Repair or replacement is undertaken in accordance with manufacturer's specifications 
Electronic equipment is functionally tested and, where necessary, cut back into commission and retested 
All appropriate records are completed, signed, and stored in accordance with enterprise guidelines 
Any changes to equipment are clearly noted on the appropriate records and stored in accordance with enterprise guidelines 
All tools and equipment are cleaned, adjusted and stored in accordance with enterprise guidelines and manufacturer's specifications 
Waste and debris are removed from worksite and disposed of in accordance with environmental requirements and enterprise guidelines 
All parties notified prior to works are notified of fault repair in accordance with enterprise guidelines 

Forms

Assessment Cover Sheet

ICTTC102D - Repair communication system faults
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

ICTTC102D - Repair communication system faults

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: