Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

ICTTEN417 Mapping and Delivery Guide
Install, configure and test a router

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency ICTTEN417 - Install, configure and test a router
Description
Employability Skills
Learning Outcomes and Application This unit describes the skills and knowledge required to undertake router installation and configuration, as part of an upgrade in an existing network or the implementation of a new network.It applies to individuals who carry out installation, maintenance and upgrade of information and communication technologies (ICT) networks.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Gather evidence to demonstrate consistent performance in conditions that are safe and replicate the workplace. Noise levels, production flow, interruptions and time variances should be typical of those experienced in the telecommunications networks engineering field of work and include access to:

a site where router installation may be conducted

field measurement equipment currently used in industry

relevant router specifications

technical requirements for a network

router

cabling

networked (LAN) computers

wide area network (WAN) service point of presence

relevant equipment and organisational documentation.

Assessors must satisfy NVR/AQTF assessor requirements.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to install router
  • Prepare for given work according to relevant legislation, work health and safety (WHS) regulations, codes and standards
  • Arrange site access according to required procedure
  • Ascertain network topology from technical requirements
  • Determine the internet protocol (IP) addressing scheme for the network topology
  • Evaluate network management and security requirements, with reference to current and future requirements
  • Select a router with appropriate features according to technical requirements
  • Choose cables, wireless application protocol (WAP), wide area network (WAN) connectors and other peripherals according to network and router specification, and WAN protocols
       
Element: Install and configure router
  • Assemble router and peripherals according to manufacturer’s requirements, enterprise guidelines and protocols
  • Connect communications cables and WAN connectors to the router and network
  • Configure router according to manufacturer’s instructions and technical requirements, taking into account interoperability requirements with network components
       
Element: Test router and reconfigure network
  • Test the router for connectivity across the network and for routing protocol functions
  • Adapt or modify predetermined router configuration, depending on outcome of tests
  • Review router in line with organisational requirements
  • Test router and peripherals according to manufacturer’s instructions and technical requirements
  • Test hardware and router to ensure full functionality and interoperability
  • Reconfigure additional hardware as required
  • Make adjustments to network depending on test results
       
Element: Complete documentation and clean worksite
  • Tabulate test results and complete all user reports
  • Complete report and notify client of network status
  • Clean up and restore worksite to client’s satisfaction
  • Secure sign-off from appropriate person
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENT

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Prepare to install router

1.1 Prepare for given work according to relevant legislation, work health and safety (WHS) regulations, codes and standards

1.2 Arrange site access according to required procedure

1.3 Ascertain network topology from technical requirements

1.4 Determine the internet protocol (IP) addressing scheme for the network topology

1.5 Evaluate network management and security requirements, with reference to current and future requirements

1.6 Select a router with appropriate features according to technical requirements

1.7 Choose cables, wireless application protocol (WAP), wide area network (WAN) connectors and other peripherals according to network and router specification, and WAN protocols

2. Install and configure router

2.1 Assemble router and peripherals according to manufacturer’s requirements, enterprise guidelines and protocols

2.2 Connect communications cables and WAN connectors to the router and network

2.3 Configure router according to manufacturer’s instructions and technical requirements, taking into account interoperability requirements with network components

3. Test router and reconfigure network

3.1 Test the router for connectivity across the network and for routing protocol functions

3.2 Adapt or modify predetermined router configuration, depending on outcome of tests

3.3 Review router in line with organisational requirements

3.4 Test router and peripherals according to manufacturer’s instructions and technical requirements

3.5 Test hardware and router to ensure full functionality and interoperability

3.6 Reconfigure additional hardware as required

3.7 Make adjustments to network depending on test results

4. Complete documentation and clean worksite

4.1 Tabulate test results and complete all user reports

4.2 Complete report and notify client of network status

4.3 Clean up and restore worksite to client’s satisfaction

4.4 Secure sign-off from appropriate person

Evidence of ability to:

plan and prepare for router installation task

select router to meet client’s business specifications

install and test the router ensuring interoperability within the network, and applying router principles and technologies

report on status of completed installation and seek sign-off and customer satisfaction

use routers

apply solutions to defined routing problems.

Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.

To complete the unit requirements safely and effectively, the individual must:

identify and outline codes of practice for computing

explain the effect of a router on delimiting broadcast traffic and on conserving bandwidth

explain how dynamic routing algorithms or protocols create and maintain routing tables

explain how to provide the network with redundant paths for reliability, and the way routers manage these paths

summarise the following aspects of routers including:

basic router commands

configuration

clock rate

password protection of router

routing protocol

dynamic routing

firewalls

functions

routing protocols and how they operate

tables

describe router-based network architectures

explain the use of routing tables in intelligent packet routing and switching.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENT

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Prepare to install router

1.1 Prepare for given work according to relevant legislation, work health and safety (WHS) regulations, codes and standards

1.2 Arrange site access according to required procedure

1.3 Ascertain network topology from technical requirements

1.4 Determine the internet protocol (IP) addressing scheme for the network topology

1.5 Evaluate network management and security requirements, with reference to current and future requirements

1.6 Select a router with appropriate features according to technical requirements

1.7 Choose cables, wireless application protocol (WAP), wide area network (WAN) connectors and other peripherals according to network and router specification, and WAN protocols

2. Install and configure router

2.1 Assemble router and peripherals according to manufacturer’s requirements, enterprise guidelines and protocols

2.2 Connect communications cables and WAN connectors to the router and network

2.3 Configure router according to manufacturer’s instructions and technical requirements, taking into account interoperability requirements with network components

3. Test router and reconfigure network

3.1 Test the router for connectivity across the network and for routing protocol functions

3.2 Adapt or modify predetermined router configuration, depending on outcome of tests

3.3 Review router in line with organisational requirements

3.4 Test router and peripherals according to manufacturer’s instructions and technical requirements

3.5 Test hardware and router to ensure full functionality and interoperability

3.6 Reconfigure additional hardware as required

3.7 Make adjustments to network depending on test results

4. Complete documentation and clean worksite

4.1 Tabulate test results and complete all user reports

4.2 Complete report and notify client of network status

4.3 Clean up and restore worksite to client’s satisfaction

4.4 Secure sign-off from appropriate person

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Prepare for given work according to relevant legislation, work health and safety (WHS) regulations, codes and standards 
Arrange site access according to required procedure 
Ascertain network topology from technical requirements 
Determine the internet protocol (IP) addressing scheme for the network topology 
Evaluate network management and security requirements, with reference to current and future requirements 
Select a router with appropriate features according to technical requirements 
Choose cables, wireless application protocol (WAP), wide area network (WAN) connectors and other peripherals according to network and router specification, and WAN protocols 
Assemble router and peripherals according to manufacturer’s requirements, enterprise guidelines and protocols 
Connect communications cables and WAN connectors to the router and network 
Configure router according to manufacturer’s instructions and technical requirements, taking into account interoperability requirements with network components 
Test the router for connectivity across the network and for routing protocol functions 
Adapt or modify predetermined router configuration, depending on outcome of tests 
Review router in line with organisational requirements 
Test router and peripherals according to manufacturer’s instructions and technical requirements 
Test hardware and router to ensure full functionality and interoperability 
Reconfigure additional hardware as required 
Make adjustments to network depending on test results 
Tabulate test results and complete all user reports 
Complete report and notify client of network status 
Clean up and restore worksite to client’s satisfaction 
Secure sign-off from appropriate person 

Forms

Assessment Cover Sheet

ICTTEN417 - Install, configure and test a router
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

ICTTEN417 - Install, configure and test a router

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: