Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

LMFMB1001B Mapping and Delivery Guide
Complete a basic mattress and base product

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency LMFMB1001B - Complete a basic mattress and base product
Description This unit covers the competency to construct, assemble and finish a basic mattress and base product.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites Nil
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for work
  • Work instructions are used to determine job requirements, including design variations, tolerances, process, materials, finish and quantity
  • Fabrication and assembly sequence is planned
  • Procedures are determined for checking quality at each stage of the process
  • Workplace health and safety requirements, including personal protection needs, are observed throughout the work
  • Suitable work area is selected for the task
  • Preparatory drawings/set-outs for tasks are confirmed
  • Materials are selected following work instructions
  • Tools and equipment suitable for fabrication are identified and checked for safe and effective operation
       
Element: Complete fabrication
  • Material is prepared and set out according to work instructions and components are marked according to workplace procedures
  • Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications
  • Components are prepared and checked against set-out and job requirements
  • Components are fabricated using fastenings and adhesives
  • Assembly process is undertaken according to workplace procedures
  • Fabricated product is checked for compliance with specifications
  • Item is finished in accordance with work instructions
       
Element: Finalise operation and maintain equipment
  • Work area is cleaned and hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures
  • Off-cuts and unused materials are collected and stored for reuse or disposed following workplace procedures
  • Waste and scrap materials are dealt with following workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Critical aspects of evidence

Interpret work instructions and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Follow work instructions, operating procedures and inspection practices to:

minimise the risk of injury to self and others

prevent damage to goods, equipment and products

achieve required product quality

Fabricate and finish at least one basic mattress and base product which requires the use of:

quilted fabric

mattress-making hand tools and equipment

springs or a spring unit

sewing machines

Work effectively with others

Resource implications

Access to plans, tools, equipment, materials, a work area and a specified project.

Method of assessment

Assessment should be by direct observation of tasks and questioning on underpinning knowledge.

Assessment may be conducted in conjunction with assessment of other units of competency.

Context of assessment

Assessment may occur on the job or in a workplace simulated facility with relevant equipment, materials, work instructions and deadlines.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

collect, organise and understand information related to work orders, basic plans and safety procedures

communicate ideas and information to enable confirmation of work requirements and specifications, coordination with site supervisor, other workers and the reporting of work outcomes and problems

plan and organise activities, including the preparation and layout of the worksite and the obtaining of equipment and materials to avoid any back tracking, workflow interruptions or wastage

work with others and in a team by recognising dependencies and using cooperative approaches to optimise workflow and productivity

use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

use pre-checking and inspection techniques to anticipate fabrication problems, avoid re-working and wastage

use the limited workplace technology related to this fabrication, including tools, equipment, materials and measuring devices

Required knowledge

the interpretation of production plans and drawings

workflow in relation to mattress and base fabrication

identification of hand and/or power tools, materials, equipment, processes and procedures

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Unit context

OHS requirements include legislation, building codes, material safety management systems, hazardous substances, dangerous goods codes and safe operating procedures

Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

Work involves reading and interpreting plans, using hand and power tools, operating basic machinery, applying quality requirements and applying product finishing techniques and materials

Work is conducted under supervision and guidance

Basic mattress product may include:

mini (dog) mattress

mattress cover

foot stool (inner spring)

headboard

mini (seat) mattress

Project is to be determined in consultation with supervisor/teacher.

Tools and equipment may include, but are not limited to:

measuring tapes or rules

cordless drills/screwdrivers

scissors

thread

needles

fabric cutter

foam cutter

staple lifters

hog ring pliers

files and rasps

trimming knife

Machines may include, but are not limited to:

sewing machines

Materials to be used may include but are not limited to:

quilted fabric

spring units

foam

springs

timber

manufactured board

border wire

hog rings

thread

needled felt

stabilising springs

Personal protective equipment

Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices

Information and procedures

Workplace procedures relating to the use of tools and equipment

Work instructions, including job sheets, plans, drawings and designs

Workplace procedures relating to reporting and communication

Manufacturer specifications and operational procedures

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work instructions are used to determine job requirements, including design variations, tolerances, process, materials, finish and quantity 
Fabrication and assembly sequence is planned 
Procedures are determined for checking quality at each stage of the process 
Workplace health and safety requirements, including personal protection needs, are observed throughout the work 
Suitable work area is selected for the task 
Preparatory drawings/set-outs for tasks are confirmed 
Materials are selected following work instructions 
Tools and equipment suitable for fabrication are identified and checked for safe and effective operation 
Material is prepared and set out according to work instructions and components are marked according to workplace procedures 
Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications 
Components are prepared and checked against set-out and job requirements 
Components are fabricated using fastenings and adhesives 
Assembly process is undertaken according to workplace procedures 
Fabricated product is checked for compliance with specifications 
Item is finished in accordance with work instructions 
Work area is cleaned and hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures 
Off-cuts and unused materials are collected and stored for reuse or disposed following workplace procedures 
Waste and scrap materials are dealt with following workplace procedures 

Forms

Assessment Cover Sheet

LMFMB1001B - Complete a basic mattress and base product
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

LMFMB1001B - Complete a basic mattress and base product

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: