Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

LMFSL3006A Mapping and Delivery Guide
Prepare and install architectural engineered lead light and stained glass

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency LMFSL3006A - Prepare and install architectural engineered lead light and stained glass
Description This unit addresses the knowledge and skills required to prepare and install leadlight and stained glass in structural and other architecturally engineered applications.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application This unit supports the attainment of skills and knowledge required for competent workplace performance in leadlight and stained glass operations. The requirement to prepare and install leadlight and stained glass in structural and other architecturally engineered applications applies to a workshop and onsite environment and involves application of skills and knowledge at a tradesperson level. These skills and knowledge are to be used within the scope of the individual's job and authority.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites Nil
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Identify work requirements
  • Applicable OHS, legislative and organisational requirements relevant to lead light and stained glass operations are verified and complied with
  • Work requirements in the form of type of lead light and stained glass, frames and the method of fixing are identified confirmed and clarified with appropriate personnel
  • The process for preparing and installing architecturally engineered lead light and stained glass is identified
       
Element: Prepare to install
  • Work sequence is determined in a logical order to suit the job
  • Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition
  • Components of the lead light and stained glass are checked against specifications or job order
  • Lead light and stained glass fixing method is selected
  • Frame or opening is prepared to receive lead light and stained glass
  • Fixing and sealing materials are prepared by mixing or cutting to length as appropriate
       
Element: Identify site conditions and restraints
  • Site safety hazards are recognised and corrective action taken to reduce injury to self and others
  • On-site difficulties are identified and addressed in accordance with regulations and enterprise agreements
  • Special characteristics of the lead light and stained glass aperture are identified in relation to the effect of the fitting process on the finished job
  • Covering material is applied where necessary to protect existing fixtures and fittings
       
Element: Fit lead light and stained glass
  • Lead light and stained glass is fixed to the frame or opening using the selected method
  • Solvents and sealants are applied
  • Lead light and stained glass and/or frame are cleaned after fixing
       
Element: Finalise the installation
  • Completed installation is checked to ensure compliance
  • Waste and scrap material is removed for disposal/recycling as required
  • Work area is cleaned and rubbish disposed of as appropriate
  • Tools, equipment and unused materials are cleaned and removed and stored appropriately
  • Workplace records are maintained
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Read and interpret a work/job specification

Identify a range of structural lead lighting and stained glass detailing their uses and limitations

Identify and explain the properties of structural lead light and stained glass

Identify the likely impact of various environmental effects on architectural lead light and stained glass

Prepare and install an architecturally engineered lead light/stain glass installation

Comply with legislation, regulations, standards, codes of practice and established safe practices and procedures for structural lead light and stained glass

Communicate effectively and work safely with others in the work area

Context of, and specific resources for assessment

The application of competency is to be assessed in the workplace or realistically simulated workplace

Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints

Assessment of essential underpinning knowledge, other than confirmatory questions, will usually be conducted in an off-site context

Assessment is to comply with relevant regulatory or Australian Standards requirements

The following resources should be made available:

workplace location or simulated workplace

materials and equipment relevant to installing structural lead light and stained glass

specifications and work instructions

Method of assessment

Assessment must satisfy the endorsed assessment guidelines of the Furnishing Industry Training Package

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge

Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application

Assessment may be applied under project related conditions (real or simulated) and require evidence of process

Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances

Assessment may be in conjunction with assessment of other units of competency

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

collect, organise and understand materials technology and information related to architectural engineered leadlight and stained glass

communicate ideas and information to enable confirmation of work requirements and specifications, coordination of work with site supervisor, other workers and customers, and the reporting of work outcomes and problems

maintain quality records related to architectural engineered leadlight and stained glass

work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

identify, anticipate and respond to faults in architectural engineered leadlight and stained glass

recognise and respond to circumstances outside instructions or personal competence

plan and organise activities including the preparation and layout of own worksite and the obtaining and use of tools and materials to avoid any backtracking, work flow interruptions or wastage

use mathematical ideas and techniques to correctly complete measurements, calculate area and volume, estimate work and material requirements

clarify and confirm work instructions

plan own work within the given task parameters

accept responsibility for given tasks

set, monitor and satisfy personal work goals

satisfy the competency requirements for the job

maintain current knowledge of tools and materials

maintain current knowledge of architectural engineered leadlight and stained glass

seek learning opportunities

use the workplace technology related to the installation of architectural engineered leadlight and stained glass components, including computers, measuring devices and recording systems

Required knowledge

State or Territory OHS legislation, regulations, standards and codes of practice relevant to the full range of processes for lead light and stained glass operations

architectural lead light and stained glass construction terminology and techniques

organisational and site standards, requirements, policies and procedures for preparation and installation of architectural lead light and stained glass

types of glass and other materials used in the lead light and stained glass industry, their characteristics, properties, uses and limitations

environmental protection requirements relating to the disposal of waste material

established communication channels and protocols

problem identification and resolution

storage systems and labelling

procedures for the recording, reporting and maintenance of workplace records and information

appropriate mathematical procedures for estimation and measurement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

OHS requirements

are to be in accordance with Commonwealth, State or Territory legislation and regulations, organisational safety policies and procedures. Requirements may include but not be limited to the use of personal protective equipment and clothing, fire fighting equipment, First Aid equipment, hazard and risk control and elimination of hazardous materials and substances, manual handling including lifting and carrying.

Legislative requirements

are to be in accordance with applicable legislation from all levels of government that affect organisational operation. Requirements may include but not be limited to award and enterprise agreements, industrial relations, Australian Standards, confidentiality and privacy, OHS, the environment, equal opportunity, anti-discrimination, relevant industry codes of practice, duty of care and heritage.

Organisational requirements

may include but not be limited to legal, organisational and site guidelines, policies and procedures relating to own role and responsibility, quality assurance, procedural manuals, quality and continuous improvement processes and standards, OHS, emergency and evacuation, ethical standards, recording and reporting, access and equity principles and practices, equipment use, maintenance and storage, environmental management (waste disposal, recycling and re-use guidelines)

Appropriate personnel

may include but not be limited to architects, engineers supervisors, suppliers, clients, colleagues and managers

Architecturally engineered lead light and stained glass

may include the on site installation of lead light and stained glass for structural and other architecturally engineered applications, including but not limited to curtain walls, infill and structural balustrade, suspended and overhead glass

may include toughened glass assemblies; aluminium systems including planar assemblies, curtain wall systems, spider assemblies, panel wall systems (hung and stacked and watertight glazing techniques including the use of silicone

Tools and equipment

may include assembly benches, drop and up-cut saws, pneumatic, hydraulic and manual presses, lifting equipment, frame tooling, copy routers, end millers, crimpers, electric and pneumatic powered drills and screwdrivers, pop rivet guns, glue guns and general hand tools

Materials

may include but are not limited to steel, fasteners, plastics, sealants, tapes, vinyl's, gaskets, timber reveals and flashings

may include lead lighting or stained glass panels, annealed glass, safety glass, patterned glass, tinted, heat reflective and insulated glass units

Fixing method

will be dependent on technical specification, type of glass and frame, security requirements, sealing methods and relevant Australian Standards

Preparation

may include cleaning, surface preparation (if required) and checking size against specification

Records

may include but not be limited to the product type, size, inspection, inspection outcomes, quality outcomes and storage locations

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Applicable OHS, legislative and organisational requirements relevant to lead light and stained glass operations are verified and complied with 
Work requirements in the form of type of lead light and stained glass, frames and the method of fixing are identified confirmed and clarified with appropriate personnel 
The process for preparing and installing architecturally engineered lead light and stained glass is identified 
Work sequence is determined in a logical order to suit the job 
Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition 
Components of the lead light and stained glass are checked against specifications or job order 
Lead light and stained glass fixing method is selected 
Frame or opening is prepared to receive lead light and stained glass 
Fixing and sealing materials are prepared by mixing or cutting to length as appropriate 
Site safety hazards are recognised and corrective action taken to reduce injury to self and others 
On-site difficulties are identified and addressed in accordance with regulations and enterprise agreements 
Special characteristics of the lead light and stained glass aperture are identified in relation to the effect of the fitting process on the finished job 
Covering material is applied where necessary to protect existing fixtures and fittings 
Lead light and stained glass is fixed to the frame or opening using the selected method 
Solvents and sealants are applied 
Lead light and stained glass and/or frame are cleaned after fixing 
Completed installation is checked to ensure compliance 
Waste and scrap material is removed for disposal/recycling as required 
Work area is cleaned and rubbish disposed of as appropriate 
Tools, equipment and unused materials are cleaned and removed and stored appropriately 
Workplace records are maintained 

Forms

Assessment Cover Sheet

LMFSL3006A - Prepare and install architectural engineered lead light and stained glass
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

LMFSL3006A - Prepare and install architectural engineered lead light and stained glass

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: