- LMTTF3004A - Perform advanced welding of plastic materials
Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
LMTTF3004A Mapping and Delivery Guide
Perform advanced welding of plastic materials
Version 1.0
Issue Date: May 2024
Qualification | - |
Unit of Competency | LMTTF3004A - Perform advanced welding of plastic materials |
---|---|---|---|
Description | This unit covers the skills and knowledge required to perform high frequency welding of plastic materials using equipment within the safe operating parameters of the equipment used. | ||
Employability Skills | This unit contains employability skills. | ||
Learning Outcomes and Application | This unit applies to the welding of plastic in the textile fabrication industry. Work may be conducted in a variety of environments, such as:operational indoor workplacesoperational outdoor workplaceshazardous or exposed conditionsWork may be conducted in small to large scale enterprises and may involve individual and team activities. Work is performed within defined procedures under direct supervision. The application of this unit is according to OHS practices of the enterprise and workplace practices, which may include:requirements prescribed by legislation, awards, agreements and conditions of employmentstandard operating procedureswork instructionsoral, written and visual communicationquality practices, including responsibility for maintenance of own work quality and contribution to quality improvement of team or section outputhousekeepingtasks related to environmental protection, waste disposal, pollution control and recyclingThis unit requires the application of skills associated with planning and organising for the safe and effective use of advanced welding processes and technology. This unit also requires the ability to read and interpret workplace instructions, inspect and check the quality of outcomes, complete workplace records and identify and address problems relating to own work. Self management skills are applied to ensure workplace and quality standards are achieved. | ||
Duration and Setting | X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting. |
||
Prerequisites/co-requisites | PrerequisitesLMTTF2014A | ||
Competency Field |
Development and validation strategy and guide for assessors and learners | Student Learning Resources | Handouts Activities |
Slides PPT |
Assessment 1 | Assessment 2 | Assessment 3 | Assessment 4 | |
---|---|---|---|---|---|---|---|---|
Elements of Competency | Performance Criteria | |||||||
Element: Prepare for welding |
| |||||||
Element: Select and prepare tools |
| |||||||
Element: Perform high frequency welding |
| |||||||
Element: Inspect quality, labelling and documentation |
| |||||||
Element: Clean up and maintain equipment |
|
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package. | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Demonstrates skills and knowledge to: comply with all relevant safety requirements including safe use of high frequency welding equipment, hand and power tools and electrical equipment. follow work orders understand equipment and materials specifications and instructions needed for the plastic welding process prepare material to be welded and set up welding equipment perform a variety of welds with a satisfactory degree of quality consistency perform normal operator maintenance of work area to enable work to be conducted safely and efficiently document and communicate work related information including reporting of faults and other problems Consistently applies skills and knowledge when: organising work completing tasks identifying improvements using workplace practices using OHS practices recording and reporting accidents and incidents assessing operational readiness of equipment used and work processes recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions completing work systematically with attention to detail without damage to goods and equipment |
Context and specific resources for assessment | Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment, and to information on workplace practices and OHS practices. |
Guidance information for assessment | This unit may be assessed independently or in combination with other relevant units. |
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
This describes the essential skills and knowledge and their level required for this unit. |
Demonstrates knowledge of: specific OHS requirements associated with high frequency welding equipment hazards associated with heated plastics plastic welding principles and techniques general operating principles of plastic welding equipment a range of plastic welding equipment, hand tools and power tools commonly used in the plastic welding process and their appropriateness for particular applications power sources such as single phase, three phase and weather protected outlets materials and equipment specifications relevant quality standards for plastic welds environmental requirements of relevant industry and workplace procedures general housekeeping policies and procedures OHS practices, including hazard identification and control measures quality practices workplace practices recording and reporting practices |
Demonstrates skills to: apply work instructions and established procedures understand relevant technical information about plastic welding processes, materials and equipment use relevant hand and power tools use relevant chemicals and cleaning agents and dispose of waste products maintain work area read, interpret and follow information on work specifications, standard operating procedures and work instructions and other reference material maintain accurate records communicate within the workplace sequence operations meet specifications clarify and check task-related information carry out work according to OHS practices |
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts. | |
Legislative/regulatory requirements | All work must comply with relevant Federal and State or Territory legislative or regulatory requirements. |
Material may include | PVC vinyls clear plastics |
Welding equipment may include | high frequency welder |
Hand and power tools may include | hammers rasps files portable sanders |
OHS practices | OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include: manual handling techniques standard operating procedures personal protective equipment safe materials handling taking of rest breaks ergonomic arrangement of workplaces following marked walkways safe storage of equipment housekeeping reporting accidents and incidents other OHS practices relevant to the job and enterprise |
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice | Yes | No | Comments/feedback |
---|---|---|---|
Material to be welded is examined and prepared for welding | |||
Work is planned to maximise safety and productivity | |||
Suitable electrical power outlets, if required, are identified | |||
Safe working environment is established and welding equipment checked for serviceability | |||
Workplace procedures and instructions are read and interpreted | |||
Appropriate supplementary hand and power tools are selected and prepared for the job | |||
Extension power cables are checked for knots and insulation damage | |||
Electrical tools are checked for safe connection to power supply | |||
Tools are examined for damage, missing components or other defects (including frayed power cords where applicable) | |||
Safety equipment is used during tool operation in accordance with OHS practices | |||
Required tasks are performed using tools in accordance with OHS practices | |||
Tools are located in a safe position when not in use | |||
Tools and extension cords are cleaned and stored in accordance with industry and OHS practices | |||
Surfaces of material are prepared for welding | |||
Material is laid out on working table or other suitable surface and anchored to prevent movement | |||
Equipment temperature or operating frequency is adjusted to prescribed settings | |||
Screens or barriers, where fitted, are lowered prior to welding process | |||
Operator and bystanders are kept at an appropriate distance or suitably protected when high frequency welding is being undertaken | |||
Welding equipment is operated in accordance with OHS practices | |||
Weld area is examined or tested for correct fusion of materials | |||
Problems or faults are identified and addressed | |||
Work piece is removed | |||
Completed weld is informally inspected to verify that it appears to be of an acceptable standard | |||
Completed product is labelled or tagged and any necessary documentation completed in accordance with workplace procedures | |||
Work area is cleaned and tools and electrical equipment are stowed away |
Forms
Assessment Cover Sheet
LMTTF3004A - Perform advanced welding of plastic materials
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
LMTTF3004A - Perform advanced welding of plastic materials
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent
Assessor name:
Signature:
Date:
Student signature:
Date: