Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MARB008 Mapping and Delivery Guide
Carry out basic welding, brazing, cutting and machining operations on a coastal vessel

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency MARB008 - Carry out basic welding, brazing, cutting and machining operations on a coastal vessel
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to carry out basic welding, brazing, cutting and machining tasks.This unit applies to engine workers in the maritime industry working as a Marine Engine Driver Grade 1 Near Coastal on vessels up to 1500 kW.This unit has links to legislative and certification requirements.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must satisfy National Vocational Education and Training Regulator (NVR)/Australian Quality Training Framework (AQTF) assessor requirements.

Assessment must occur in workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in simulated workplace operational situations that reflect workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment must include access to:

tools, equipment, machinery, materials and personal protective equipment currently used in industry

applicable documentation such as legislation, regulations, codes of practice, workplace procedures and operational manuals

range of relevant exercises, case studies and/or simulations.

Prerequisites/co-requisites
Competency Field B - Equipment Checking and Maintenance
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Carry out basic welding tasks
  • Requirements for welding tasks are correctly interpreted from work instructions
  • Parts are prepared for welding according to established practice
  • Parts are welded according to established practice and work requirements
  • Weld defects are identified and appropriate action is taken according to established practice and standard operating procedures
  • Flame gouging methods are used to remove plate and weld material according to established practice and standard operating procedures
  • Finished work is checked against work instructions for accuracy and quality
       
Element: Carry out basic brazing tasks
  • Requirements for brazing tasks are correctly interpreted from work instructions
  • Parts are prepared for brazing according to established practice and work requirements
  • Brazing equipment is prepared for brazing operations according to established procedures
  • Parts are brazed using established procedures
  • Finished work is checked against work instructions for accuracy and quality
       
Element: Carry out basic cutting tasks
  • Instructions are reviewed, and required size and shape of cut work is correctly identified and interpreted
  • Work is correctly marked out in preparation for cutting according to established practice and standard operating procedures
  • Thermal cutting plant and equipment is set up according to established procedures
  • Steel plate and/or rolled sections are cut to shape and size according to established practice and standard operating procedures
  • Finished work is checked against work instructions for accuracy and quality according to standard operating procedures
       
Element: Carry out basic machining tasks
  • Requirements for basic machining tasks are correctly interpreted from work instructions according to standard operating procedures
  • Work is correctly marked out in preparation for basic machining according to established practice and standard operating procedures
  • Machine is set up according to established procedures
  • Machining is carried out according to established procedures
  • Finished work is checked against work instructions for accuracy and quality according to standard operating procedures
       
Element: Follow safety and hazard control procedures
  • Required safety precautions and regulations are followed when carrying out basic welding
  • Operational hazards are identified and action is taken to eliminate, or where elimination is not possible to minimise, risk to personnel
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Carry out basic welding tasks

1.1

Requirements for welding tasks are correctly interpreted from work instructions

1.2

Parts are prepared for welding according to established practice

1.3

Parts are welded according to established practice and work requirements

1.4

Weld defects are identified and appropriate action is taken according to established practice and standard operating procedures

1.5

Flame gouging methods are used to remove plate and weld material according to established practice and standard operating procedures

1.6

Finished work is checked against work instructions for accuracy and quality

2

Carry out basic brazing tasks

2.1

Requirements for brazing tasks are correctly interpreted from work instructions

2.2

Parts are prepared for brazing according to established practice and work requirements

2.3

Brazing equipment is prepared for brazing operations according to established procedures

2.4

Parts are brazed using established procedures

2.5

Finished work is checked against work instructions for accuracy and quality

3

Carry out basic cutting tasks

3.1

Instructions are reviewed, and required size and shape of cut work is correctly identified and interpreted

3.2

Work is correctly marked out in preparation for cutting according to established practice and standard operating procedures

3.3

Thermal cutting plant and equipment is set up according to established procedures

3.4

Steel plate and/or rolled sections are cut to shape and size according to established practice and standard operating procedures

3.5

Finished work is checked against work instructions for accuracy and quality according to standard operating procedures

4

Carry out basic machining tasks

4.1

Requirements for basic machining tasks are correctly interpreted from work instructions according to standard operating procedures

4.2

Work is correctly marked out in preparation for basic machining according to established practice and standard operating procedures

4.3

Machine is set up according to established procedures

4.4

Machining is carried out according to established procedures

4.5

Finished work is checked against work instructions for accuracy and quality according to standard operating procedures

5

Follow safety and hazard control procedures

5.1

Required safety precautions and regulations are followed when carrying out basic welding

5.2

Operational hazards are identified and action is taken to eliminate, or where elimination is not possible to minimise, risk to personnel

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include:

carrying out basic welding, brazing, cutting and machining tasks while underway, in port and moored or at anchor

cleaning, sharpening or adjusting tools according to standard operating procedures

dressing and truing a grinding wheel

following required work schedule according to company requirements

identifying a glazed, loaded or untrue grinding wheel condition and taking appropriate action

marking out work to specifications, and measuring and checking the quality of finished work

performing basic calculations required to carry out basic welding, brazing, cutting and machining operations

reading and interpreting work specifications and drawings

reading, interpreting and applying instructions and standard operating procedures relevant to basic welding, brazing, cutting and machining operations required on a coastal vessel

recognising routine problems that may occur when performing basic welding, brazing, cutting and machining operations on a vessel and taking appropriate action

selecting and safely using welding, brazing, cutting and machining tools and equipment according to operating procedures

storing welding, brazing, cutting and machining tools and equipment after use according to standard procedures

taking action promptly to report operational incidents and problems according to regulations and shipboard procedures

using effective verbal and other communication skills required when carrying out basic welding, brazing, cutting and machining operations on a vessel

working safely and collaboratively with others when carrying out basic welding, brazing, cutting and machining operations on a vessel.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

applicable sections of relevant maritime regulations

applicable legislation, regulations and codes of practice:

National Standard for Commercial Vessels (NSCV) and Uniform Shipping Laws (USL) Code

relevant Australian engineering standards

relevant state and territory marine regulations

relevant work health and safety (WHS)/occupational health and safety (OHS) and pollution control legislation and policies

basic operations within area of own responsibility:

basic fillet welds

basic butt welds

basic pad welds

manual metal arc welding

oxygen acetylene welding

basic machining operation

characteristics and identifying features of common engineering drill bits

documentation and records:

maintenance records

manufacturer instructions for tools and equipment

relevant safety data sheets (SDS)/material safety data sheets (MSDS)

safety management system plans, procedures, checklists and instructions

work instructions

vessel and company procedures

environmental protection measures when carrying out basic engineering tasks

hazards and related safety precautions when carrying out basic welding, brazing, cutting and machining tasks

procedures for:

identifying a glazed, loaded or untrue grinding wheel condition

dressing and/or truing a grinding wheel

safety management system and procedures

standard operating procedures for basic welding, brazing, cutting and machining tasks required of a Marine Engine Driver Grade 1

standard procedures for marking out work to specifications and measuring and checking the quality of finished work, including the correct use of:

adjustable gauge

callipers

centre punch hammers

dividers

rules and tapes

scribers

squares

trammels

vernier callipers and micrometer

techniques for identifying defective welds within limits of responsibility

types, names and identifying features of drilling machines used on coastal maritime vessels

typical work specifications and drawings used on a coastal vessel.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Carry out basic welding tasks

1.1

Requirements for welding tasks are correctly interpreted from work instructions

1.2

Parts are prepared for welding according to established practice

1.3

Parts are welded according to established practice and work requirements

1.4

Weld defects are identified and appropriate action is taken according to established practice and standard operating procedures

1.5

Flame gouging methods are used to remove plate and weld material according to established practice and standard operating procedures

1.6

Finished work is checked against work instructions for accuracy and quality

2

Carry out basic brazing tasks

2.1

Requirements for brazing tasks are correctly interpreted from work instructions

2.2

Parts are prepared for brazing according to established practice and work requirements

2.3

Brazing equipment is prepared for brazing operations according to established procedures

2.4

Parts are brazed using established procedures

2.5

Finished work is checked against work instructions for accuracy and quality

3

Carry out basic cutting tasks

3.1

Instructions are reviewed, and required size and shape of cut work is correctly identified and interpreted

3.2

Work is correctly marked out in preparation for cutting according to established practice and standard operating procedures

3.3

Thermal cutting plant and equipment is set up according to established procedures

3.4

Steel plate and/or rolled sections are cut to shape and size according to established practice and standard operating procedures

3.5

Finished work is checked against work instructions for accuracy and quality according to standard operating procedures

4

Carry out basic machining tasks

4.1

Requirements for basic machining tasks are correctly interpreted from work instructions according to standard operating procedures

4.2

Work is correctly marked out in preparation for basic machining according to established practice and standard operating procedures

4.3

Machine is set up according to established procedures

4.4

Machining is carried out according to established procedures

4.5

Finished work is checked against work instructions for accuracy and quality according to standard operating procedures

5

Follow safety and hazard control procedures

5.1

Required safety precautions and regulations are followed when carrying out basic welding

5.2

Operational hazards are identified and action is taken to eliminate, or where elimination is not possible to minimise, risk to personnel

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Operational hazards include one or more of the following:

moving and rotating machinery

moving heavy loads using unsafe procedures

non-compliance with safe working procedures

poor housekeeping procedures

power tools

sharp tools and implements

unsecured machinery, components or equipment

using equipment beyond safe working limits

using welding equipment near explosive/flammable liquids and gases

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Requirements for welding tasks are correctly interpreted from work instructions 
Parts are prepared for welding according to established practice 
Parts are welded according to established practice and work requirements 
Weld defects are identified and appropriate action is taken according to established practice and standard operating procedures 
Flame gouging methods are used to remove plate and weld material according to established practice and standard operating procedures 
Finished work is checked against work instructions for accuracy and quality 
Requirements for brazing tasks are correctly interpreted from work instructions 
Parts are prepared for brazing according to established practice and work requirements 
Brazing equipment is prepared for brazing operations according to established procedures 
Parts are brazed using established procedures 
Finished work is checked against work instructions for accuracy and quality 
Instructions are reviewed, and required size and shape of cut work is correctly identified and interpreted 
Work is correctly marked out in preparation for cutting according to established practice and standard operating procedures 
Thermal cutting plant and equipment is set up according to established procedures 
Steel plate and/or rolled sections are cut to shape and size according to established practice and standard operating procedures 
Finished work is checked against work instructions for accuracy and quality according to standard operating procedures 
Requirements for basic machining tasks are correctly interpreted from work instructions according to standard operating procedures 
Work is correctly marked out in preparation for basic machining according to established practice and standard operating procedures 
Machine is set up according to established procedures 
Machining is carried out according to established procedures 
Finished work is checked against work instructions for accuracy and quality according to standard operating procedures 
Required safety precautions and regulations are followed when carrying out basic welding 
Operational hazards are identified and action is taken to eliminate, or where elimination is not possible to minimise, risk to personnel 

Forms

Assessment Cover Sheet

MARB008 - Carry out basic welding, brazing, cutting and machining operations on a coastal vessel
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

MARB008 - Carry out basic welding, brazing, cutting and machining operations on a coastal vessel

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: