Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MARL5002A Mapping and Delivery Guide
Apply basic principles of marine engineering thermodynamics

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency MARL5002A - Apply basic principles of marine engineering thermodynamics
Description This unit involves the skills and knowledge required to apply basic principles of marine engineering thermodynamics to perform calculations and to explain the operation of marine machinery, including engines, compressors, steam plants, refrigeration and air-conditioning units.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application This unit applies to the work of Marine Engineering Watchkeepers on commercial vessels greater than 750 kW and forms part of the requirements for the Certificate of Competency Marine Engineer Watchkeeper issued by the Australian Maritime Safety Authority (AMSA).
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites Not applicable.
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Explain common thermodynamic principles
  • Desired System International (SI) units applicable to thermodynamic calculations are developed
  • Basic properties of fluids are outlined
  • Gauge pressure is distinguished from absolute pressure
  • Temperature is defined and temperature scales are outlined
  • Calculations are performed by applying formulae for work, power and efficiency
       
Element: Calculate properties of gas during expansion and compression
  • Calculations are performed by applying Boyle’s, Charles’s and combined gas law
  • Gas equation is derived and applied to gas process calculations
  • Specific heat of gases and the relationship between Cp, Cv, R and Gamma is defined
  • Heat transfer is calculated for constant pressure and constant volume processes
  • Isothermal, adiabatic and polytropic processes are outlined and properties of gases after expansion and compression including the effects of turbocharging are calculated
  • Work required to compress gases is illustrated and calculated
       
Element: Explain methods of heat transfer
  • Different forms of heat transfer and their application to marine systems are explained
  • Heat transfer through flat layers is calculated
  • Purpose of insulation is explained
       
Element: Explain enthalpy and apply to mixture calculations
  • Heat energy is defined
  • Fundamental formula for heat energy transfer is developed
  • Specific heat and its application are identified
  • Enthalpy and change of phase are outlined
  • Heat mixture problems involving water equivalent, ice, water and steam are solved
  • Specific heat of materials are calculated
  • Latent heat and dryness fraction are identified
  • Steam tables are used to find values of enthalpy for water, saturated and superheated steam and dryness fraction
  • Temperature/enthalpy diagram is constructed from steam table data
       
Element: Explain steam plants and calculate thermal efficiency
  • Basic steam plant cycles are sketched and function of each component is outlined
  • Steam cycles on a temperature/enthalpy diagram are illustrated
  • Effects of superheating and under cooling are clarified
  • Calculations are performed for heat supplied, rejected, work and thermal efficiency of a steam plant
  • Methods of improving cycle efficiency are outlined
       
Element: Explain operation of internal combustion engine cycles
  • Operating principles of two stroke and four stroke internal combustion engines are outlined
  • Differentiation is made, by use of a pressure/volume diagram, between Otto, Diesel and Dual combustion cycles
  • Mean effective pressure is calculated from an indicator diagram
  • Indicated power formula is developed and related calculations are solved
  • Specific fuel consumption is defined and calculated
  • Ideal cycle and air standard efficiency is defined
       
Element: Explain operating cycle of reciprocating air compressors
  • Pressure/volume diagram is used to describe operating cycle of single stage reciprocating air compressors
  • Mass of air delivered by single stage reciprocating air compressors is calculated
  • Clearance volume and its effect on volumetric efficiency is outlined, and volumetric efficiency is calculated
  • Work per cycle for isothermal and polytropic processes is calculated
       
Element: Explain operating cycle of refrigeration and air conditioning plant
  • Principle of refrigeration is outlined
  • Temperature/enthalpy and pressure/enthalpy diagrams are compared
  • Refrigerants used in refrigeration and air conditioning machines are identified
  • Refrigeration effect and plant capacity are defined
  • Refrigeration tables are used to calculate refrigeration effect and condition of vapour after expansion
  • Operating cycle of self-contained and centralised air conditioning systems are outlined and compared
  • Relative humidity is defined and key features of a psychrometric chart are outlined
       
Element: Apply linear, superficial and volumetric expansion equations to calculate expansion of liquids and metals
  • Expansion processes for metals is defined
  • Coefficient of linear expansion is outlined
  • Linear expansion is applied to calculate machinery clearances and to shrink fit allowances
  • Superficial and volumetric expansion of solids is calculated
  • Apparent expansion of liquids in tanks is calculated
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, the required skills and knowledge, the range statement and the Assessment Guidelines for the Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the Elements, Performance Criteria, Required Skills, Required Knowledge and include:

performing accurate and reliable calculations

solving problems using appropriate laws and principles.

Context of and specific resources for assessment

Performance is demonstrated consistently over time and in a suitable range of contexts.

Resources for assessment include access to:

industry-approved marine operations site where basic principles of marine engineering thermodynamics can be applied

diagrams, specifications and other information required for performing basic calculations related to marine engineering thermodynamics

technical reference library with current publications on basic marine thermodynamics

tools, equipment and personal protective equipment currently used in industry

relevant regulatory and equipment documentation that impacts on work activities

range of relevant exercises, case studies and/or other simulated practical and knowledge assessments

appropriate range of relevant operational situations in the workplace.

In both real and simulated environments, access is required to:

relevant and appropriate materials and equipment

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals.

Method of assessment

Practical assessment must occur in an:

appropriately simulated workplace environment and/or

appropriate range of situations in the workplace.

A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate to this unit:

direct observation of the candidate applying basic principles of marine engineering thermodynamics

direct observation of the candidate applying relevant WHS/OHS requirements and work practices.

Guidance information for assessment

Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended.

In all cases where practical assessment is used it should be combined with targeted questioning to assess Required Knowledge.

Assessment processes and techniques must be appropriate to the language and literacy requirements of the work being performed and the capacity of the candidate.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required Skills:

Assess own work outcomes and maintain knowledge of current codes, standards, regulations and industry practices

Explain basic principles of marine engineering thermodynamics

Identify and apply relevant mathematical formulas and techniques to solve basic problems related to marine engineering thermodynamics

Identify and interpret numerical and graphical information, and perform basic mathematical calculations related to marine engineering thermodynamics, such as gas expansion and contraction, heat transfer, thermal efficiency, and the expansion of liquids and solids

Identify, collate and process information required to perform basic calculations related to marine engineering thermodynamics

Impart knowledge and ideas through verbal, written and visual means

Read and interpret written information needed to perform basic calculations related to marine engineering thermodynamics

Use calculators to perform mathematical calculations

Required Knowledge:

Enthalpy

Expansion processes for metals (conduction, convection, radiation)

Forms of heat transfer (conduction, convection, radiation)

Gas laws

Internal combustion engine cycles

Methods of heat transfer

Operating cycle of reciprocating air compressors

Operating principles of two stroke and four stroke internal combustion engines

Principles of refrigeration

Properties of fluids (density, mass, pressure, specific volume, temperature)

SI units

Steam plants

Thermodynamic principles

Thermal efficiency calculations

Work health and safety (WHS)/occupational health and safety OHS requirements and work practices

Not applicable.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Desired System International (SI) units applicable to thermodynamic calculations are developed 
Basic properties of fluids are outlined 
Gauge pressure is distinguished from absolute pressure 
Temperature is defined and temperature scales are outlined 
Calculations are performed by applying formulae for work, power and efficiency 
Calculations are performed by applying Boyle’s, Charles’s and combined gas law 
Gas equation is derived and applied to gas process calculations 
Specific heat of gases and the relationship between Cp, Cv, R and Gamma is defined 
Heat transfer is calculated for constant pressure and constant volume processes 
Isothermal, adiabatic and polytropic processes are outlined and properties of gases after expansion and compression including the effects of turbocharging are calculated 
Work required to compress gases is illustrated and calculated 
Different forms of heat transfer and their application to marine systems are explained 
Heat transfer through flat layers is calculated 
Purpose of insulation is explained 
Heat energy is defined 
Fundamental formula for heat energy transfer is developed 
Specific heat and its application are identified 
Enthalpy and change of phase are outlined 
Heat mixture problems involving water equivalent, ice, water and steam are solved 
Specific heat of materials are calculated 
Latent heat and dryness fraction are identified 
Steam tables are used to find values of enthalpy for water, saturated and superheated steam and dryness fraction 
Temperature/enthalpy diagram is constructed from steam table data 
Basic steam plant cycles are sketched and function of each component is outlined 
Steam cycles on a temperature/enthalpy diagram are illustrated 
Effects of superheating and under cooling are clarified 
Calculations are performed for heat supplied, rejected, work and thermal efficiency of a steam plant 
Methods of improving cycle efficiency are outlined 
Operating principles of two stroke and four stroke internal combustion engines are outlined 
Differentiation is made, by use of a pressure/volume diagram, between Otto, Diesel and Dual combustion cycles 
Mean effective pressure is calculated from an indicator diagram 
Indicated power formula is developed and related calculations are solved 
Specific fuel consumption is defined and calculated 
Ideal cycle and air standard efficiency is defined 
Pressure/volume diagram is used to describe operating cycle of single stage reciprocating air compressors 
Mass of air delivered by single stage reciprocating air compressors is calculated 
Clearance volume and its effect on volumetric efficiency is outlined, and volumetric efficiency is calculated 
Work per cycle for isothermal and polytropic processes is calculated 
Principle of refrigeration is outlined 
Temperature/enthalpy and pressure/enthalpy diagrams are compared 
Refrigerants used in refrigeration and air conditioning machines are identified 
Refrigeration effect and plant capacity are defined 
Refrigeration tables are used to calculate refrigeration effect and condition of vapour after expansion 
Operating cycle of self-contained and centralised air conditioning systems are outlined and compared 
Relative humidity is defined and key features of a psychrometric chart are outlined 
Expansion processes for metals is defined 
Coefficient of linear expansion is outlined 
Linear expansion is applied to calculate machinery clearances and to shrink fit allowances 
Superficial and volumetric expansion of solids is calculated 
Apparent expansion of liquids in tanks is calculated 

Forms

Assessment Cover Sheet

MARL5002A - Apply basic principles of marine engineering thermodynamics
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

MARL5002A - Apply basic principles of marine engineering thermodynamics

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: