Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MARM016 Mapping and Delivery Guide
Survey hull and superstructure of a commercial vessel

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency MARM016 - Survey hull and superstructure of a commercial vessel
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to undertake a survey of hull and superstructure of a commercial vessel according to relevant regulations. It includes planning survey, carrying out survey and providing survey report.This unit applies to people working in the maritime industry as a domestic commercial vessel marine surveyor and may form part of accreditation requirements for surveyors under Australian legislation.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must satisfy National Vocational Education and Training Regulator (NVR)/Australian Quality Training Framework (AQTF) assessor requirements.

Assessment must satisfy the National Vocational Education and Training Regulator (NVR)/Australian Quality Training Framework (AQTF) standards.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Assessment must occur in workplace operational situations or where these are not available, in simulated workplace operational situations or an industry-approved marine operations site that replicates workplace conditions, where a survey of hull and superstructure of a commercial vessel can be conducted.

Resources for assessment include access to:

relevant documentation including workplace procedures, regulations, codes of practice and operation manuals

tools, equipment and personal protective equipment currently used in industry used when surveying a hull and superstructure of a commercial vessel.

Performance should be demonstrated consistently over time and in a suitable range of contexts.

Prerequisites/co-requisites
Competency Field M – Marine Surveying
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare for survey task
  • Relevant standards for vessel hull and superstructure are accurately identified and accessed to support survey task
  • Vessel survey regime is identified and relevant regulatory requirements, organisational requirements and procedures for survey scope are accessed and reviewed
  • Vessel survey regime is confirmed against regulatory and organisational requirements
  • Survey scope and depth is confirmed against relevant regulatory and organisational requirements
  • Survey purpose, objectives and variations are discussed with relevant personnel
  • Operational limits, certificate of operations and previous certificates of survey are reviewed to identify and take into consideration any special conditions, equivalent solutions, specific areas of operations and other regulatory limitations, exceptions or conditions that may impact on survey task
  • Survey equipment and tools to carry out survey are accurately identified, selected and checked prior to survey
       
Element: Confirm hull type and material construction
  • Types of hull common to domestic commercial vessels are accurately identified and regulatory or additional standards are accessed and reviewed for use in survey
  • Common materials used in hull construction and superstructure are identified and regulatory or additional standards are accessed and reviewed for use in survey
  • Construction, type of hull and materials are confirmed prior to survey by accessing vessel records
       
Element: Conduct periodic survey of hull and superstructure
  • Survey of hull and superstructure is carried out according to regulatory requirements
  • Changes to operational equipment or equivalent solutions are identified and examined for fitness both in or out of water as required by survey schedule
  • Watertight openings and skin fittings are inspected for compliance
  • Deformation and integrity of hull and superstructure are inspected for compliance
  • Paint and coatings are inspected for condition
  • Cathodic protection is inspected where applicable
  • Superstructure weather tightness is checked for integrity
  • Appendages are inspected for integrity
       
Element: Report and act on non-compliance
  • Non-compliance is detected, recorded and reported according to regulatory and organisational requirements
  • Specialist support services are identified and sourced as appropriate
  • Risks arising from detected non-compliance are reported and communicated to relevant personnel
  • Relevant provisions of legislation appropriate to level of risk detected are identified and followed
  • Appropriate reports and documentation relating to survey are developed and managed according to organisational and regulatory requirements
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Plan and prepare for survey task

1.1

Relevant standards for vessel hull and superstructure are accurately identified and accessed to support survey task

1.2

Vessel survey regime is identified and relevant regulatory requirements, organisational requirements and procedures for survey scope are accessed and reviewed

1.3

Vessel survey regime is confirmed against regulatory and organisational requirements

1.4

Survey scope and depth is confirmed against relevant regulatory and organisational requirements

1.5

Survey purpose, objectives and variations are discussed with relevant personnel

1.6

Operational limits, certificate of operations and previous certificates of survey are reviewed to identify and take into consideration any special conditions, equivalent solutions, specific areas of operations and other regulatory limitations, exceptions or conditions that may impact on survey task

1.7

Survey equipment and tools to carry out survey are accurately identified, selected and checked prior to survey

2

Confirm hull type and material construction

2.1

Types of hull common to domestic commercial vessels are accurately identified and regulatory or additional standards are accessed and reviewed for use in survey

2.2

Common materials used in hull construction and superstructure are identified and regulatory or additional standards are accessed and reviewed for use in survey

2.3

Construction, type of hull and materials are confirmed prior to survey by accessing vessel records

3

Conduct periodic survey of hull and superstructure

3.1

Survey of hull and superstructure is carried out according to regulatory requirements

3.2

Changes to operational equipment or equivalent solutions are identified and examined for fitness both in or out of water as required by survey schedule

3.3

Watertight openings and skin fittings are inspected for compliance

3.4

Deformation and integrity of hull and superstructure are inspected for compliance

3.5

Paint and coatings are inspected for condition

3.6

Cathodic protection is inspected where applicable

3.7

Superstructure weather tightness is checked for integrity

3.8

Appendages are inspected for integrity

4

Report and act on non-compliance

4.1

Non-compliance is detected, recorded and reported according to regulatory and organisational requirements

4.2

Specialist support services are identified and sourced as appropriate

4.3

Risks arising from detected non-compliance are reported and communicated to relevant personnel

4.4

Relevant provisions of legislation appropriate to level of risk detected are identified and followed

4.5

Appropriate reports and documentation relating to survey are developed and managed according to organisational and regulatory requirements

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria.

Survey of hull and superstructure of a commercial vessel should be undertaken in at least three or more contexts and include:

analysing and evaluating available data and observations to form logical conclusions

applying relevant work health and safety/occupational health and safety (WHS/OHS) requirements and work practices

carrying out engineering measurements and applying metric and imperial conversions

communicating effectively with others as required verbally and in writing

developing and using research techniques to identify gaps in knowledge and to recognise professional development opportunities

developing effective planning documents

disseminating and clarifying technical information

identifying strengths, weaknesses and failure modes of common marine construction materials

implementing relevant WHS/OHS requirements, work practices and protection of the marine environment

interpreting engineering drawings

interpreting relevant legislation, regulations, codes of practice, standards and rules

managing risks

providing customer service

providing high quality reports

recognising own professional limitations

undertaking research and analysis using relevant reference material

using computers

working independently and unsupervised

writing technical reports.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

acoustic and thermal insulation principles and practices

awareness of working stresses in vessel under load or in a seaway

basic principles of stability, procedures for incline experiments, simple roll test, stable and unstable equilibrium

commercial vessel classifications and survey requirements for various areas of operations

compatibility and durability of construction materials

composite production methods, quality assurance and secondary bonding techniques

damage propagation caused by defects, poor engineering practice and/or transmission of dynamic forces

documentation and checklists:

construction drawings

defect list

historical records

National Standard for the Administration of Marine Safety (NSAMS) Section 4

procedural forms

safety management systems

stability book

standard operating procedures

Uniform Shipping Laws (USL) Section 14 Appendix 2

vessel files

elementary ergonomic design principals and methods for reducing harm to crew in a seaway

environmental controls and regulations

forms, causes and prevention of corrosion in a marine environment

galvanic series of common metals used in boat building

hull forms and vessel types

implications of poor ventilation practice

insurance, liability and professional indemnity

interaction of vessel structures, mechanical systems and appropriate installation practices

maintaining watertight integrity

marine craft construction:

methods, materials and vessel anatomy

terminology and definitions

marine-grade adhesives, mechanical fasteners, sealants and caulking materials

marine protective coatings, fairing compounds and finishes

principles of sheathing

repair techniques and maintenance procedures for common marine craft construction materials

report writing formats

safe working practices and risk assessment procedures

suitable structural support for out-of-water vessels to prevent topple, sag, hog and/or damage from local stress concentrations

welding techniques, procedures and standards

WHS/OHS legislation, policies and procedures.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Plan and prepare for survey task

1.1

Relevant standards for vessel hull and superstructure are accurately identified and accessed to support survey task

1.2

Vessel survey regime is identified and relevant regulatory requirements, organisational requirements and procedures for survey scope are accessed and reviewed

1.3

Vessel survey regime is confirmed against regulatory and organisational requirements

1.4

Survey scope and depth is confirmed against relevant regulatory and organisational requirements

1.5

Survey purpose, objectives and variations are discussed with relevant personnel

1.6

Operational limits, certificate of operations and previous certificates of survey are reviewed to identify and take into consideration any special conditions, equivalent solutions, specific areas of operations and other regulatory limitations, exceptions or conditions that may impact on survey task

1.7

Survey equipment and tools to carry out survey are accurately identified, selected and checked prior to survey

2

Confirm hull type and material construction

2.1

Types of hull common to domestic commercial vessels are accurately identified and regulatory or additional standards are accessed and reviewed for use in survey

2.2

Common materials used in hull construction and superstructure are identified and regulatory or additional standards are accessed and reviewed for use in survey

2.3

Construction, type of hull and materials are confirmed prior to survey by accessing vessel records

3

Conduct periodic survey of hull and superstructure

3.1

Survey of hull and superstructure is carried out according to regulatory requirements

3.2

Changes to operational equipment or equivalent solutions are identified and examined for fitness both in or out of water as required by survey schedule

3.3

Watertight openings and skin fittings are inspected for compliance

3.4

Deformation and integrity of hull and superstructure are inspected for compliance

3.5

Paint and coatings are inspected for condition

3.6

Cathodic protection is inspected where applicable

3.7

Superstructure weather tightness is checked for integrity

3.8

Appendages are inspected for integrity

4

Report and act on non-compliance

4.1

Non-compliance is detected, recorded and reported according to regulatory and organisational requirements

4.2

Specialist support services are identified and sourced as appropriate

4.3

Risks arising from detected non-compliance are reported and communicated to relevant personnel

4.4

Relevant provisions of legislation appropriate to level of risk detected are identified and followed

4.5

Appropriate reports and documentation relating to survey are developed and managed according to organisational and regulatory requirements

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Relevant standards must include:

Australian/New Zealand Standards (AS/NZS)

class

manufacture guidelines

Marine Orders

National Standard for the Administration of Marine Safety (NSAMS) section 4

National Standard for Commercial Vessels (NSCV)

safety data sheets (SDS)/material safety data sheets (MSDS)

safety of life at sea (SOLAS)

Uniform Shipping Law (USL)

work health and safety/occupational health and safety (WHS/OHS)

Survey regime must include:

class of vessel

survey depth and level of vessel

Relevant regulatory requirements include one or more of the following:

AS/NZS, in particular:

AS/NZS ISO 9001: 2008 Quality Management Systems – requirements

Marine Safety (Domestic Commercial Vessel) National Law

NSAMS Section 4

NSCV

Part B – General Requirements

Part C – Vessel Construction

Part E – Operational Practices

Survey scope and depth includes one or more of the following:

condition

initial

modification/further building

periodic survey (in or out of water)

repair/damage

Survey equipment and tools include one or more of the following:

communication equipment

draft survey hydrometer

drill

entry authority

hammer/welder’s hammer

meat piercing thermometer

mirror

personal protective equipment such as respirators, gloves, overalls, boots, hearing protection, goggles, masks

photographs

plastic sampling bags

pocket calculator

recording equipment:

camera

dictaphone

lap top computer

notebook

sampling equipment:

silver nitrate test kit for chlorides

test kit equipment

thermometers

water-detecting paste

scraper

screwdriver

small mallet

sounding tapes

storage equipment/facilities

tape measure /measuring wheel

Types of hull include one or more of the following:

box

catamaran

foils

non water displacement

shallow draft

single

wave piercing

Domestic commercial vessels must include:

vessels defined as commercial vessels in Marine Safety (Domestic Commercial Vessel) National Law

Materials include one or more of the following:

aluminium

cement

composite

fibreglass

steel

timber

Survey schedule include one or more of the following:

twelve months

twenty-four months

thirty-months

five year cycle with NSAMS:

periodic survey (either annual or bi-annual)

change of class survey

safety equipment only survey

damage/repair or condition surveys

equivalent solution or deemed-to-satisfy surveys

SMS components

in water

out of water

Watertight openings and skin fittings include one or more of the following:

cooling water systems

doppler log

drain plugs

hatch

inlet valve

sea chest

stabilisers

Deformation and integrity include one or more of the following:

blisters

chemical attack

cracking

degradation

distortion

dry rot

isolated damage

leaching

out of trim

structural failure

ultra violet (UV) breakdown

water ingress

weathering

Paint and coatings include one or more of the following:

anti fouling

copper sheathing

gel based

Appendages include one or more of the following:

bilge keels

keel coolers

rudders

stabilisers

Specialist support services include one or more of the following:

analytical laboratories

chemical (sewage systems)

electrical

naval architects

non-destructive evaluation (NDE) services

noise

pressure vessel testing

Appropriate reports and documentation include one or more of the following:

certificate of operation

certificate of survey

statements of compliance

survey report

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Relevant standards for vessel hull and superstructure are accurately identified and accessed to support survey task 
Vessel survey regime is identified and relevant regulatory requirements, organisational requirements and procedures for survey scope are accessed and reviewed 
Vessel survey regime is confirmed against regulatory and organisational requirements 
Survey scope and depth is confirmed against relevant regulatory and organisational requirements 
Survey purpose, objectives and variations are discussed with relevant personnel 
Operational limits, certificate of operations and previous certificates of survey are reviewed to identify and take into consideration any special conditions, equivalent solutions, specific areas of operations and other regulatory limitations, exceptions or conditions that may impact on survey task 
Survey equipment and tools to carry out survey are accurately identified, selected and checked prior to survey 
Types of hull common to domestic commercial vessels are accurately identified and regulatory or additional standards are accessed and reviewed for use in survey 
Common materials used in hull construction and superstructure are identified and regulatory or additional standards are accessed and reviewed for use in survey 
Construction, type of hull and materials are confirmed prior to survey by accessing vessel records 
Survey of hull and superstructure is carried out according to regulatory requirements 
Changes to operational equipment or equivalent solutions are identified and examined for fitness both in or out of water as required by survey schedule 
Watertight openings and skin fittings are inspected for compliance 
Deformation and integrity of hull and superstructure are inspected for compliance 
Paint and coatings are inspected for condition 
Cathodic protection is inspected where applicable 
Superstructure weather tightness is checked for integrity 
Appendages are inspected for integrity 
Non-compliance is detected, recorded and reported according to regulatory and organisational requirements 
Specialist support services are identified and sourced as appropriate 
Risks arising from detected non-compliance are reported and communicated to relevant personnel 
Relevant provisions of legislation appropriate to level of risk detected are identified and followed 
Appropriate reports and documentation relating to survey are developed and managed according to organisational and regulatory requirements 

Forms

Assessment Cover Sheet

MARM016 - Survey hull and superstructure of a commercial vessel
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

MARM016 - Survey hull and superstructure of a commercial vessel

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: