Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MEA207C Mapping and Delivery Guide
Remove and install aircraft electronic system components

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency MEA207C - Remove and install aircraft electronic system components
Description This unit of competency is part of the Avionic Certificate IV AME training pathway. It covers the competencies required for the removal and installation of electronic system components of both fixed and rotary wing aircraft. The unit is used in workplaces that operate under the airworthiness regulatory systems of the ADF and CASA. Where a CASA licensing outcome is sought this unit forms part of the CASA requirement for the granting of the chosen Aircraft Maintenance Engineer Licence under CASR Part 66, in accordance with the licensing provisions in Section 3, Assessment Guidelines.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application This unit requires application of hand skills and the use of maintenance documentation/publications in the removal and installation of electronic system components and Line Replaceable Units.Applications include fixed and rotary wing aircraft that are fitted with electronic systems.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites MEA201B Remove and install miscellaneous aircraft electrical hardware/components Not applicable
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Remove aircraft electronic system components
  • System is rendered safe and prepared in accordance with the applicable maintenance manual and isolation tags are fitted where necessary to ensure personnel safety
  • Electronic system component removal is carried out in accordance with the applicable maintenance manual
  • Required maintenance documentation is completed and processed in accordance with standard enterprise procedures
  • Removed components are tagged and packaged in accordance with specified procedures
       
Element: Install aircraft electronic system components
  • Electronic system components to be installed are checked to confirm correct part numbers, modification status, serviceability and shelf life
  • Physical installation of electronic components is performed in accordance with the applicable maintenance manual and regulatory requirements, ensuring appropriate adjustment/alignment is carried out
  • System is reinstated to correct operational condition in preparation for testing, as necessary
  • Required maintenance documentation is completed and processed in accordance with standard enterprise procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to remove and install aircraft electronic system components/LRUs while observing all relevant safety and component handling precautions.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

It is essential that cleanliness requirements and safety precautions applicable to the system being maintained are fully observed, understood and complied with, as well as work practices associated with electrostatic sensitive devices.

Evidence of transferability of skills and knowledge related to removal and installation is essential. This is to be demonstrated by application across a range of electronic system components as listed in the Range Statement. An understanding of the attachment methods, connection of hardware, and the need for adjustment or calibration and system operation as they relate to the work must be demonstrated before undertaking any action. The work plan should take account of applicable safety and quality requirements in accordance with the industry and regulatory standards.

A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements of the unit of competency are being achieved under routine supervision on sufficient components/LRUs of systems in Groups 1 to 9 to establish competency (Groups 6 to 9 may be omitted where they are not applicable to the enterprise). This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry Evidence Guide.

Context of and specific resources for assessment

Competency should be assessed in the workplace or simulated workplace using tools and equipment specified in maintenance manuals. It is also expected that general-purpose tools, test and ground support equipment found in most routine situations would be used where appropriate.

Method of assessment

Guidance information for assessment

Individuals being assessed who have already attained MEA206C Remove and install aircraft basic radio communication and navigation system components, will have covered a significant amount of the skill and knowledge requirements for this unit plus part of the Performance Criteria for Elements 1 and 2 and associated Range Statement items. Log of Industrial Experience and Achievement records relating to MEA206C Remove and install aircraft basic radio communication and navigation system components, may be accepted as also meeting the evidence requirements for this unit in the applicable areas.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

Look for evidence that confirms skills in:

locating and identifying electronic navigational system components, including altitude reporting systems (transponder, encoder and control unit), remote attitude displays and Inertial Navigation and Reference Systems

locating and identifying multi function displays, including EFIS, EICAS, ECAM, FMCS and HUD

locating and identifying radio communication and navigation system components comprising UHF, SATCOM communications, DME, ILS, GNS radio navigation, TCAS, RADALT, radio system antennas, including half dipole, slotted, loop and marconi

locating and identifying primary and secondary radar system components including transmission lines, waveguide and antennas

locating and identifying cockpit voice recorder system components, internal communications, passenger/cockpit audio/visual components

applying relevant OHS practices

Required knowledge

Look for evidence that confirms knowledge of:

component attachment methods

connection of components and plugs

printed circuit boards

panel and rack mounting systems for electronic system components and LRUs

relevant OHS practices

the use of approved maintenance documentation and aircraft publications relating to the avionics systems and components being maintained

handling and maintenance precautions relating to gyroscopes, gimbals, electronic displays, airborne radar systems (including pressurised waveguides), electrostatic sensitive devices, radio installations

electromagnetic environment

relevant regulatory requirements and standard procedures

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Note

Range statements listed below are numbered to facilitate specification of the assessment requirements included in the Evidence Guide

Electronic system components

Electronic system components include panel and rack mounted electronic system components and LRUs of:

1. Instrument navigation systems

2. Communication systems

3. Radio navigation systems

4. Pulse operated systems

5. Antennas

6. Electronic instrument displays

7. Automatic flight control systems.

8. Cabin entertainment equipment

9. On-board maintenance systems

Application of this unit may relate to:

scheduled or unscheduled maintenance activities

individual or team-related activities

Procedures and requirements

Refer to industry standard procedures specified by manufacturers, regulatory authorities or the enterprise

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
System is rendered safe and prepared in accordance with the applicable maintenance manual and isolation tags are fitted where necessary to ensure personnel safety 
Electronic system component removal is carried out in accordance with the applicable maintenance manual 
Required maintenance documentation is completed and processed in accordance with standard enterprise procedures 
Removed components are tagged and packaged in accordance with specified procedures 
Electronic system components to be installed are checked to confirm correct part numbers, modification status, serviceability and shelf life 
Physical installation of electronic components is performed in accordance with the applicable maintenance manual and regulatory requirements, ensuring appropriate adjustment/alignment is carried out 
System is reinstated to correct operational condition in preparation for testing, as necessary 
Required maintenance documentation is completed and processed in accordance with standard enterprise procedures 

Forms

Assessment Cover Sheet

MEA207C - Remove and install aircraft electronic system components
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MEA207C - Remove and install aircraft electronic system components

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: