Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MEA715 Mapping and Delivery Guide
Evaluate aeroplane flight control systems

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency MEA715 - Evaluate aeroplane flight control systems
Description
Employability Skills
Learning Outcomes and Application This unit of competency applies to mechanical and powered flight control systems and their components, including the interface of powered systems and automatic flight control systems. It involves evaluation of systems (mechanical and powered systems and their components and the interface with automatic flight control systems) within both civil and military environments for compliance with design and performance standards, and with airworthiness regulatory requirements. Also covered is documentation of the evaluation process within management systems, such as configuration management (CM) and integrated logistic support (ILS).It is suitable for people working within aircraft design teams, within the engineering departments of aircraft maintenance organisations or employed within Continuing Airworthiness Management Organisations (CAMOs) and Approved Engineering Organisations, and for those pursuing qualifications or careers in those fields.This unit is used in workplaces that operate under the airworthiness regulatory systems of the Australian Defence Force (ADF) and the Civil Aviation Safety Authority (CASA).
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is, the candidate is not in productive work, then a simulated working environment must be used that reflects realistic workplace situations and conditions.

The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team.

Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate ethnicity, age, gender, demographics and disability.

Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application.

Assessment may be applied under project-related conditions (real or simulated) and require evidence of process.

Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.

Assessors must be satisfied that the candidate can competently and consistently:

identify and apply WHS, regulatory and risk management procedures

determine parameters and context of tasks, personal, team, licensed technical and professional assistance and support personnel functions and responsibilities, and chain of responsibility

investigate sustainability implications of aeroplane flight control system applications as specified in CM and/or ILS requirements

assess and apply basic aeroplane flight control system design and maintenance/repair requirements, and graphics skills and techniques

evaluate aeroplane flight control systems and components for compliance with WHS and airworthiness regulatory requirements

report and document results including provision of CM and ILS input data

Assessment may be in conjunction with assessment of other units of competency where required.

Assessors must satisfy the requirements of the National Vocational Education and Training Regulator (Australian Skills Quality Authority, or its successors).
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to evaluate aeroplane flight control system applications
  • Confirm and apply safe working practices relating to aeroplane flight control systems
  • Determine parameters and context of applications and purpose of evaluation
  • Confirm personal functions and responsibilities, team and support functional group interdependencies and communications
  • Confirm that tasks and responsibilities are appropriate to qualifications and delegations and that appropriate support, including technical and professional assistance, is available
  • Determine chain of responsibility for the activity evaluation, reporting arrangements and timelines
  • Identify work health and safety (WHS) and regulatory requirements with particular emphasis on safety, codes of practice, performance requirements and standards, including airworthiness regulatory requirements for aeroplane flight control systems, risk management and organisational procedures
       
Element: Identify principles and techniques required for evaluation of aeroplane flight control system applications
  • Identify features and functions of aeroplane flight control systems and components
  • Review aeroplane flight control system design and layout requirements and techniques
  • Identify system electrical power requirements and interfaces with avionic systems
       
Element: Evaluate aeroplane flight control system applications
  • Evaluate proposed modifications to aeroplane flight control systems and system components
  • Evaluate aeroplane flight control system and system component maintenance requirements
  • Evaluate aeroplane flight control system and system component reliability and defect history
  • Evaluate proposed component substitutions
  • Evaluate application for compliance with WHS Acts, regulations, codes, directives and standards/specifications, including those related to risk management
       
Element: Report results
  • Report results of scoping, principles and techniques identification and evaluation of applications
  • Provide documentation, such as system schematics, wiring diagrams and data required by CM and/or ILS and as required by airworthiness regulations
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1.

Prepare to evaluate aeroplane flight control system applications

1.1

Confirm and apply safe working practices relating to aeroplane flight control systems

1.2

Determine parameters and context of applications and purpose of evaluation

1.3

Confirm personal functions and responsibilities, team and support functional group interdependencies and communications

1.4

Confirm that tasks and responsibilities are appropriate to qualifications and delegations and that appropriate support, including technical and professional assistance, is available

1.5

Determine chain of responsibility for the activity evaluation, reporting arrangements and timelines

1.6

Identify work health and safety (WHS) and regulatory requirements with particular emphasis on safety, codes of practice, performance requirements and standards, including airworthiness regulatory requirements for aeroplane flight control systems, risk management and organisational procedures

2.

Identify principles and techniques required for evaluation of aeroplane flight control system applications

2.1

Identify features and functions of aeroplane flight control systems and components

2.2

Review aeroplane flight control system design and layout requirements and techniques

2.3

Identify system electrical power requirements and interfaces with avionic systems

3.

Evaluate aeroplane flight control system applications

3.1

Evaluate proposed modifications to aeroplane flight control systems and system components

3.2

Evaluate aeroplane flight control system and system component maintenance requirements

3.3

Evaluate aeroplane flight control system and system component reliability and defect history

3.4

Evaluate proposed component substitutions

3.5

Evaluate application for compliance with WHS Acts, regulations, codes, directives and standards/specifications, including those related to risk management

4.

Report results

4.1

Report results of scoping, principles and techniques identification and evaluation of applications

4.2

Provide documentation, such as system schematics, wiring diagrams and data required by CM and/or ILS and as required by airworthiness regulations

Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria under the specified conditions of assessment, and must include:

identifying WHS, regulatory and electrical safety requirements, risk management procedures, features and functions of aeroplane flight control systems and components, system design principles and techniques, including:

performance and operating environment

system control

indicating and circuit protection requirements

interface requirements between aeroplane flight control systems and other systems, including automatic flight control systems and electrical power distribution

determining and confirming:

parameters and context of tasks

chain of responsibility

personal functions and responsibilities

team and support functional group interdependencies and communications

appropriate qualifications and delegations

appropriate support, including technical and professional assistance

investigating associated CM and ILS requirements and drafting required data

drafting material required for compliance with airworthiness regulations

assessing and applying:

basic aeroplane flight control system performance analysis and design procedures

design standards, regulatory requirements

graphics skills and techniques

evaluating system components and specifications against system design and operating criteria

reporting and documenting results of scoping, principles and techniques identification and evaluation of applications.

Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

features and layout of aeroplane flight control systems including control, indication and interface with other systems:

primary flight control mechanical systems and components

primary flight control powered systems - hydraulic actuators and boost packages

interface with automatic flight control synchros and servos

trim systems – mechanical and electrical

flaps – mechanical, hydraulic and electrical actuation

high lift and spoiler systems

speed brakes

basic design principles for:

primary flight controls (aerodynamics, stability, control surface mass and aerodynamic balancing, flutter)

primary flight control mechanical systems and components

powered flight control systems and components

trim systems and components

flap systems including actuators and mechanical linkages

high lift and spoiler systems including actuators and mechanical linkages

speed brakes and system components

interface with the aircraft electrical and instrument systems

interface with automatic flight control systems

wiring types, standards and specifications

performance and operating environment effects

airworthiness regulator design standards

compliance requirements of the WHS Act and regulations, codes of practice, standards, risk assessment

scope of trade, technical and professional support services required in aircraft flight control system applications

management data interface with CM and ILS.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1.

Prepare to evaluate aeroplane flight control system applications

1.1

Confirm and apply safe working practices relating to aeroplane flight control systems

1.2

Determine parameters and context of applications and purpose of evaluation

1.3

Confirm personal functions and responsibilities, team and support functional group interdependencies and communications

1.4

Confirm that tasks and responsibilities are appropriate to qualifications and delegations and that appropriate support, including technical and professional assistance, is available

1.5

Determine chain of responsibility for the activity evaluation, reporting arrangements and timelines

1.6

Identify work health and safety (WHS) and regulatory requirements with particular emphasis on safety, codes of practice, performance requirements and standards, including airworthiness regulatory requirements for aeroplane flight control systems, risk management and organisational procedures

2.

Identify principles and techniques required for evaluation of aeroplane flight control system applications

2.1

Identify features and functions of aeroplane flight control systems and components

2.2

Review aeroplane flight control system design and layout requirements and techniques

2.3

Identify system electrical power requirements and interfaces with avionic systems

3.

Evaluate aeroplane flight control system applications

3.1

Evaluate proposed modifications to aeroplane flight control systems and system components

3.2

Evaluate aeroplane flight control system and system component maintenance requirements

3.3

Evaluate aeroplane flight control system and system component reliability and defect history

3.4

Evaluate proposed component substitutions

3.5

Evaluate application for compliance with WHS Acts, regulations, codes, directives and standards/specifications, including those related to risk management

4.

Report results

4.1

Report results of scoping, principles and techniques identification and evaluation of applications

4.2

Provide documentation, such as system schematics, wiring diagrams and data required by CM and/or ILS and as required by airworthiness regulations

This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.

Aeroplane flight control systems include:

Mechanical primary flight control

Powered primary flight control

Trim

Flaps

High lift and spoiler

Speed brakes

Interfaces with automatic flight control systems and with electrical and instrument systems

Aeroplane flight control system components include:

Cockpit controls

Cable runs and hardware

Mechanical linkages

Hydraulic actuators and boost packs

Hydraulic plumbing, valves and filters

Trim mechanical and electrical actuators

Flap mechanical, hydraulic and electrical actuators

Flap tracks and rollers

High lift and spoiler actuators and mechanical linkages

Speed brake actuators

Indicators, lights and switches

Standards and guidance material include:

ADF AAP7001 .054 Airworthiness Design Requirements Manual

FAR Part 23 Airworthiness Standards for Airplanes in the Normal, Utility, Aerobatic or Commuter Categories

FAR Part 25 Airworthiness Standards for Airplanes in the Transport Category

EASA CS-23 Certification Specifications for Aeroplanes in the Normal, Utility, Aerobatic or Commuter Categories

EASA CS-25 Certification Specifications for Airplanes in the Transport Category

CASA AC21.16(0) Approval of material, parts, processes and appliances

CASA AC21.145(0) Manufacture of parts during the course of maintenance

CASA AC21.601(0) Australian Technical Standards Order Authorisation

CASA CAAP35 -7(0) Design approval of modifications and repairs

CASA AC 21-99 Aircraft Wiring and Bonding

FAA AC 43-13-1B Acceptable Methods, Techniques and Practices – Aircraft Inspection and Repair

Configuration management (CM)

CM is a process for control and documentation of the design and development process and for the management of system, component and software throughout the service life

Integrated logistic support (ILS)

ILS is an integrated approach to the management of logistic disciplines originally developed for the management of military systems from design concept to final disposal at life-of-type. It covers:

reliability engineering, maintainability engineering and maintenance planning

supply and support

support and test equipment

manpower and personnel

training and training support

technical data and publications

computer resources support

facilities

packaging, handling, storage and transportation

design interface

Appropriate technical and professional assistance

Assistance from individuals with CASA maintenance certification licenses or those with supervisory authorisations in the ADF regulatory system

Professional support from engineers employed within:

organisations with CASA continuing airworthiness management or maintenance approvals

approved engineering organisations under the ADF regulatory system

Engineers employed within organisations recognised by overseas airworthiness organisations

WHS, regulatory requirements and enterprise procedures include:

WHS Acts and regulations

Relevant standards

Industry codes of practice

Risk assessments

Registration requirements

Safe work practices

Civil Aviation Safety Regulations (CASRs)

AAP7001 .053 ADF Technical Airworthiness Management Manual

Overseas airworthiness authorities, where applicable, e.g. Federal Aviation Administration, Transport Canada, European Aviation Safety Agency

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Confirm and apply safe working practices relating to aeroplane flight control systems 
Determine parameters and context of applications and purpose of evaluation 
Confirm personal functions and responsibilities, team and support functional group interdependencies and communications 
Confirm that tasks and responsibilities are appropriate to qualifications and delegations and that appropriate support, including technical and professional assistance, is available 
Determine chain of responsibility for the activity evaluation, reporting arrangements and timelines 
Identify work health and safety (WHS) and regulatory requirements with particular emphasis on safety, codes of practice, performance requirements and standards, including airworthiness regulatory requirements for aeroplane flight control systems, risk management and organisational procedures 
Identify features and functions of aeroplane flight control systems and components 
Review aeroplane flight control system design and layout requirements and techniques 
Identify system electrical power requirements and interfaces with avionic systems 
Evaluate proposed modifications to aeroplane flight control systems and system components 
Evaluate aeroplane flight control system and system component maintenance requirements 
Evaluate aeroplane flight control system and system component reliability and defect history 
Evaluate proposed component substitutions 
Evaluate application for compliance with WHS Acts, regulations, codes, directives and standards/specifications, including those related to risk management 
Report results of scoping, principles and techniques identification and evaluation of applications 
Provide documentation, such as system schematics, wiring diagrams and data required by CM and/or ILS and as required by airworthiness regulations 

Forms

Assessment Cover Sheet

MEA715 - Evaluate aeroplane flight control systems
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MEA715 - Evaluate aeroplane flight control systems

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: