List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice	Yes	No	Comments/feedback
Inspect restraint belts or harnesses for serviceability in accordance with standard procedures
Report identified faults beyond own authority to rectify to supervisor, and quarantine faulty restraint system
Inspect, test and replace unserviceable parts of a quick release fitting
Replace unserviceable parts of the restraint belts or harnesses to render restraint system serviceable in accordance with standard procedures while observing all relevant work health and safety (WHS) requirements, including the use of material safety data sheets (MSDSs) and items of personal protective equipment (PPE)
Complete basic restraint belt or harness stitching repairs in accordance with standard procedures
Clean restraint belts or harnesses in accordance with standard procedures
Present restraint belts or harnesses for inspection by supervisor in accordance with standard procedures
Complete and process maintenance documentation in accordance with standard enterprise procedures
Clean and perform required maintenance on equipment and tools used in accordance with standard enterprise procedures
Obtain approval to remove restraint system in accordance with standard enterprise procedures
Remove restraint system from aircraft in accordance with maintenance publications
Complete and process removal-related maintenance documentation in accordance with standard enterprise procedures
Obtain approval to fit restraint system in accordance with standard enterprise procedures
Fit restraint system to aircraft in accordance with applicable maintenance publication
Complete and process maintenance documentation in accordance with standard enterprise procedures
Clean and perform required maintenance on equipment and tools used in accordance with standard enterprise procedures

Assessment Cover Sheet

MEALSU0007 - Maintain, install and remove restraint systems

Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MEALSU0007 - Maintain, install and remove restraint systems

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: