List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice	Yes	No	Comments/feedback
Identify coating removal task from maintenance documentation and enterprise procedures
Identify materials and tools to be used for coating removal from enterprise procedures and maintenance publications
Match aircraft or component with relevant maintenance documentation
Identify and comply with work health and safety (WHS) requirements, use material safety data sheets (MSDSs) and check personal protective equipment (PPE) for correct fit and function
Assemble required materials and tools for coating removal in accordance with maintenance manual
Prepare access to the aircraft in accordance with standard enterprise procedures
Determine masking requirements, including barrier materials, using enterprise procedures and maintenance publications
Apply required masking, including barrier materials, to relevant areas and sensitive components in accordance with requirements
Observe environmental requirements during the coating removal process in accordance with enterprise procedures
Apply chemical strippers in accordance with enterprise and chemical handling procedures
Remove coating using mechanical techniques in accordance with enterprise procedures and maintenance manuals
Clean surfaces of all chemical residue and mechanical media in accordance with enterprise procedures and maintenance manuals
Remove masking, including barrier materials, and clean surfaces in accordance with enterprise procedures
Collect and store materials that can be reused in accordance with enterprise procedures
Remove and dispose of or store waste materials in accordance with legislative, regulatory and enterprise procedures
Clean equipment in accordance with enterprise procedures or manufacturer’s instructions while observing all relevant WHS requirements, including the use of MSDS and items of PPE
Check equipment for serviceability and deal with unserviceable items in accordance with enterprise procedures
Clean and maintain tools in accordance with enterprise procedures
Clean work area and inspect for serviceable condition in accordance with enterprise procedures

Assessment Cover Sheet

MEASTR0006 - Remove surface coatings from aircraft or aircraft components

Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MEASTR0006 - Remove surface coatings from aircraft or aircraft components

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: