List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice	Yes	No	Comments/feedback
Identify required pre-treatment tasks from maintenance documentation and enterprise procedures
Identify required materials and tools from enterprise procedures or process specifications
Match aircraft or component identification to the correct maintenance documentation
Identify and comply with work health and safety (WHS) requirements and check personal protective equipment (PPE) for correct fit and function
Remove common surface soils and perform required water-break testing in accordance with enterprise procedures or process specifications
Complete masking on areas where pre-treatment is not required in accordance with identified requirements
Prepare aluminium alloy substrate for application of conversion coating in accordance with enterprise procedures or process specifications
Establish and maintain correct environment for conversion coating application in accordance with requirements
Apply required chemical conversion coating while observing all relevant WHS requirements, including using material safety data sheets (MSDSs) and items of PPE
Remove masking and leave aircraft or component in a suitable condition for the next task in accordance with standard enterprise procedures
Document completion of pre-treatment process in accordance with standard enterprise procedures
Collect and store materials that can be reused in accordance with enterprise procedures
Remove and dispose of or store waste materials in accordance with legislative, regulatory and enterprise procedures
Clean equipment in accordance with enterprise procedures or manufacturer’s instructions while observing all relevant WHS requirements, including the use of MSDSs and items of PPE
Check equipment for serviceability and deal with unserviceable items in accordance with enterprise procedures
Clean and maintain tools in accordance with enterprise procedures
Clean work area and inspect for serviceable condition in accordance with enterprise procedures

Assessment Cover Sheet

MEASTR0007 - Pre-treat aluminium alloy surfaces

Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MEASTR0007 - Pre-treat aluminium alloy surfaces

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: