List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice	Yes	No	Comments/feedback
Determine requirements for markings, graphics and decals from maintenance documentation including finishing scheme drawings, enterprise procedures and maintenance publications
Identify and gather equipment for task from maintenance documentation and specified procedures
Match aircraft or component identification with relevant maintenance documentation
Prepare and match decals with documentation
Manufacture markings or marking stencils in accordance with drawings and specifications
Manufacture graphics or graphic stencils in accordance with drawings and specifications
Identify and comply with work health and safety (WHS) requirements and check personal protective equipment (PPE) for correct fit and function
Assemble materials and equipment application of markings and graphics
Clean surface on which marking or graphic will be applied in accordance with standard enterprise procedures
Accurately determine marking or graphic position and apply required masking or barrier materials
Establish environmental requirements for application of markings and graphics in accordance with enterprise procedures
Apply markings and graphics in accordance with standard enterprise procedures
Perform required rework and measurement of gloss and thickness in accordance with standard enterprise procedures
Perform required final clean-up tasks, including removing masking or barrier materials as required
Determine decal positions, clean surfaces and apply decals in accordance with standard enterprise procedures
Complete required documentation in accordance with standard enterprise procedures
Collect and store reusable material
Remove and dispose of or store waste material in accordance with legislative, regulatory and standard enterprise procedures
Clean equipment in accordance with standard enterprise procedures or manufacturer’s instructions
Check equipment for serviceability and deal with unserviceable items in accordance with standard enterprise procedures
Clean and maintain tools in accordance with standard enterprise procedures
Clean work area and inspect for serviceable condition against workplace standards

Assessment Cover Sheet

MEASTR0011 - Apply aircraft identification markings, graphics and decals

Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MEASTR0011 - Apply aircraft identification markings, graphics and decals

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: