List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice	Yes	No	Comments/feedback
Determine procedure for assembly and disassembly of structure in order to plan equipment use
Select jigs, fixtures or bracing methods to maintain contour and structural integrity during disassembly and assembly operations
Organise required components and equipment in accordance with standard enterprise procedures
Support structure with required jigs, fixtures or bracing
Provide access by removing structural components as required
Remove structural hardware and fasteners in accordance with aircraft standard practices while observing all relevant work health and safety (WHS) requirements, including use of material safety data sheets (MSDSs) and items of personal protective equipment (PPE)
Perform required tagging on disassembled components to facilitate correct reassembly
Apply required sealants and restore aircraft structure surface finishes
Check replacement component alignment for conformance to specifications prior to fastener hole generation
Perform hole location or relocation in accordance with specification procedures and standard practices
Follow standard practices in hole generation sequencing to ensure that assembly stress defects are not built in
Disassemble, clean and deburr components and apply surface treatments prior to final assembly while observing all relevant WHS requirements, including the use of MSDSs and items of PPE
Select and apply required sealants or adhesives in accordance with assembly specifications or documentation while observing all relevant WHS requirements, including use of MSDSs and items of PPE
Position and secure components with appropriate temporary fastening devices for accurate assembly
Select and install fasteners in accordance with assembly specifications or manuals
Inspect assembled components to confirm dimensional accuracy and specifications are met
Use checking or testing equipment as required to ensure requirements are met
Check aircraft mensuration or compliance with applicable maintenance manuals as required
Complete and process required documentation in accordance with standard enterprise procedures

Assessment Cover Sheet

MEASTR0017 - Perform major disassembly and reassembly on aircraft structure

Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MEASTR0017 - Perform major disassembly and reassembly on aircraft structure

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: