Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
MEM08014 Mapping and Delivery Guide
Apply protective coatings (basic)
Version 1.0
Issue Date: May 2024
Qualification | - |
Unit of Competency | MEM08014 - Apply protective coatings (basic) |
---|---|---|---|
Description | |||
Employability Skills | |||
Learning Outcomes and Application | This unit of competency defines the skills and knowledge required to follow pre-determined procedures to spray pre-treatments and protective coatings at a basic level where an understanding of specific health and safety matters is required. It covers single and two-pack coatings not containing isocyanates.Where isocyanates are present unit MEM08015 Apply protective coatings (advanced) should also be selected.Where the interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.Where the selection and use of mobile load shifting equipment is required unit MEM11004 Undertake dogging and unit MEM11010 Operate mobile load shifting equipment, should also be selected as appropriate. Where the selection and use of engineering measurement is required unit MEM12023 Perform engineering measurements should also be selected.Where the selection and use of tools is required unit MEM18001 Use hand tools and unit MEM18002 Use power tools/hand held operations, should also be selected as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication. Band: AUnit Weight: 4 | ||
Duration and Setting | X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting. |
||
Prerequisites/co-requisites | |||
Competency Field | Surface finishing |
Development and validation strategy and guide for assessors and learners | Student Learning Resources | Handouts Activities |
Slides PPT |
Assessment 1 | Assessment 2 | Assessment 3 | Assessment 4 | |
---|---|---|---|---|---|---|---|---|
Elements of Competency | Performance Criteria | |||||||
Element: Determine job requirements |
| |||||||
Element: Comply with work health and safety (WHS) requirements at all times | ||||||||
Element: Identify job requirements from specifications, job sheets or work instructions | ||||||||
Element: Identify and interpret supplier information, product details, Australian and international standards, regulatory and legislative requirements relevant to the work to be undertaken | ||||||||
Element: Prepare to undertake work |
| |||||||
Element: Gather required protective coating application equipment according to job requirements | ||||||||
Element: Prepare worksite for application of protective coating | ||||||||
Element: Select and maintain personal protective equipment (PPE) |
| |||||||
Element: Identify and use ancillary support attachments | ||||||||
Element: Maintain PPE in accordance with manufacturers' specification and SOPs | ||||||||
Element: Prepare work piece for application of protective coating |
| |||||||
Element: Identify unsuitable work pieces/surfaces and fabrication defects and undertake appropriate remedial action or report in accordance with SOPs | ||||||||
Element: Mask components where protective coating application is not specified | ||||||||
Element: Identify conditions for overspray | ||||||||
Element: Prepare equipment for application of surface coating materials |
| |||||||
Element: Record status/report by proforma or orally in accordance with procedures | ||||||||
Element: Assemble conventional coating application equipment in accordance with equipment requirements | ||||||||
Element: Apply single pack coatings |
| |||||||
Element: Demonstrate correct method of wet film thickness in accordance with specified dry film | ||||||||
Element: Thin coating material to suit the application method and achieve required film thickness | ||||||||
Element: Apply coating using specified application method | ||||||||
Element: Use coating schedules for metal and non-metal materials | ||||||||
Element: Monitor coating application and curing technique according to SOPs | ||||||||
Element: Clean and store equipment |
| |||||||
Element: Record and report faulty equipment to appropriate personnel in accordance with SOPs | ||||||||
Element: Store coating application equipment in accordance with SOPs | ||||||||
Element: Inspect finish surface |
| |||||||
Element: Determine coating thickness using appropriate instruments and compare results with job specifications | ||||||||
Element: Inspect total surface for conformance to specification in accordance with SOPs | ||||||||
Element: Record inspection results in accordance with SOPs |