Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MEM12019 Mapping and Delivery Guide
Measure components using coordinate measuring machines

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency MEM12019 - Measure components using coordinate measuring machines
Description
Employability Skills
Learning Outcomes and Application This unit of competency defines the skills and knowledge required to operate coordinate measuring machines (CMM) in a production environment, including basic setting up of components and manually aligning probes.Where other machines/processes are to be adjusted as a consequence of the CMM operation, appropriate machining/process operation units should also be selected.Where basic operation excludes setting up components and manually aligning probes is required unit MEM07024 Operate and monitor machine and process should also be selected.Where interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.Where the selection and use of engineering measurement is required unit MEM12023 Perform engineering measurements should also be selected.Where the selection and use of tools is required unit MEM18001 Use hand tools should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 4
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Measurement
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Load components
  • Undertake pre-start checks in accordance with SOPs
  • Observe correct safety procedures and check safety equipment for correct operation
  • Select correct fixture/clamping device
  • Load and clamp component and fixtures in accordance with SOPs
  • Check probe configuration in accordance with specifications
  • Take pre-measurement manual hits to determine probe alignment in accordance with SOPs
       
Element: Measure components
  • Select, run and verify part program, as required
  • Measure components utilising appropriate measuring devices
  • Interpret results and identify and report non-conforming/out-of-tolerance measurements
  • Shut down part program and remove components
  • Leave coordinate measuring machine, accessories and surrounds in a clean, safe condition
       
Element: Determine job requirements
  • Follow standard operating procedures (SOPs)
       
Element: Comply with work health and safety (WHS) requirements at all times
       
Element: Use appropriate personal protective equipment (PPE) in accordance with SOPs
       
Element: Identify job requirements from specifications, sketches, job sheets or work instructions
  • Undertake pre-start checks in accordance with SOPs
       
Element: Observe correct safety procedures and check safety equipment for correct operation
       
Element: Select correct fixture/clamping device
       
Element: Load and clamp component and fixtures in accordance with SOPs
  • Check probe configuration in accordance with specifications
       
Element: Take pre-measurement manual hits to determine probe alignment in accordance with SOPs
  • Select, run and verify part program, as required
       
Element: Measure components utilising appropriate measuring devices
       
Element: Interpret results and identify and report non-conforming/out-of-tolerance measurements
       
Element: Shut down part program and remove components
       
Element: Leave coordinate measuring machine, accessories and surrounds in a clean, safe condition
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.

Probes include one (1) or more of the following:

solid trigger probes

electronic trigger probes

Measure components includes the following:

are limited to those which can be measured directly and do not require measurements to be constructed mathematically

Coordinate measurement machines include one (1) or more of the following:

manual machines

machines fitted with microprocessors

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Undertake pre-start checks in accordance with SOPs 
Observe correct safety procedures and check safety equipment for correct operation 
Select correct fixture/clamping device 
Load and clamp component and fixtures in accordance with SOPs 
Check probe configuration in accordance with specifications 
Take pre-measurement manual hits to determine probe alignment in accordance with SOPs 
Select, run and verify part program, as required 
Measure components utilising appropriate measuring devices 
Interpret results and identify and report non-conforming/out-of-tolerance measurements 
Shut down part program and remove components 
Leave coordinate measuring machine, accessories and surrounds in a clean, safe condition 
Follow standard operating procedures (SOPs) 
 
 
Undertake pre-start checks in accordance with SOPs 
 
 
Check probe configuration in accordance with specifications 
Select, run and verify part program, as required 
 
 
 
 

Forms

Assessment Cover Sheet

MEM12019 - Measure components using coordinate measuring machines
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MEM12019 - Measure components using coordinate measuring machines

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: