Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MEM21006A Mapping and Delivery Guide
Service quartz watches

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency MEM21006A - Service quartz watches
Description This unit of competency covers servicing techniques for quartz analog and digital display watches, including modules and case components.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application This unit of competency applies to watch repairers working in watch service and repair centres and jewellery stores and kiosks offering watch service and repair. It is a common servicing requirement for watch repairers and may extend, in some cases, to the work of service technicians.Band: AUnit weight: 4 points
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites MEM21005A Diagnose faults in quartz watches MEM21002A Perform watch movement exchange MEM21001A Replace watch batteries, capacitors and bands
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Determine servicing requirements and liaise with customer
  • Identify watch functions and features
  • Prepare written quotation and inform customer of watch condition and performance concerns
  • Outline recommended service procedures to be undertaken to remedy identified faults
  • Verify and agree servicing requirements with customer
  • Prepare watch for handover
  • Record and document repair process
       
Element: Disassemble watch case and movement components for servicing
  • Establish appropriate working environment
  • Select and use workshop tools and equipment appropriately
  • Open and close watch cases correctly
  • Remove case movement and components without damaging or marking
  • Verify gasket condition and replace if required
  • Clean cases and bands, as required
       
Element: Service watch case and movement components
  • Inspect condition of watch case and movement components
  • Confirm servicing requirements
  • Replace faulty or worn component parts
  • Clean components and parts
  • Inspect watch case and movement components for cleanliness and rectify imperfections/faults
  • Use correct tools and equipment for handling and servicing
       
Element: Reassemble and test watch case and movement components
  • Reassemble watch case and movement components according to manufacturer specifications
  • Confirm correct assembly of gear train and other components
  • Use correct types and amounts of lubricant according to manufacturer specifications
  • Use tools and equipment appropriately taking precautions for correct reassembly
  • Verify/confirm watch functioning according to manufacturer specifications
  • Verify watch performance including rate testing and adjust, as required, according to manufacturer specifications
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to service quartz watches to industry standards, manufacturer specifications and in accordance with safety regulations and procedures.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessors must be satisfied that the candidate can competently and consistently:

use correct disassembly/reassembly techniques

perform watch function and electrical performance testing

use appropriate watch movement/components cleaning techniques

apply lubrication techniques.

Context of and specific resources for assessment

Assessment may occur on the job or in a simulated working environment. Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and information on workplace practices and OHS practices.

Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate ethnicity, age, gender, demographics and disability.

Access must be provided to appropriate learning and/or assessment support when required. Where applicable, physical resources should include equipment modified for people with disabilities.

Method of assessment

Assessment must satisfy the endorsed Assessment Guidelines of the MEM05 Metal and Engineering Training Package.

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge.

Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application.

Assessment may be applied under project-related conditions (real or simulated) and require evidence of process.

Assessment must confirm a reasonable inference that competency is not only able to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.

Assessment may be in conjunction with assessment of other units of competency where required.

Guidance information for assessment

Assessment processes and techniques must be culturally appropriate and appropriate to the language and literacy capacity of the candidate and the work being performed.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

Required skills include:

diagnosing and fault-finding quartz analog and digital watches

dismantling and assembling quartz watch digital modules, movements, gear trains and sub-assemblies

applying correct type and amount of lubrication

using quartz timing and testing equipment

communicating effectively

interpreting manufacturer technical guides

Required knowledge

Required knowledge includes:

quartz watch construction and components (i.e. analog, digital and duo displays)

quartz watch operating principles (e.g. analog and digital)

quartz watch lubrication techniques

watch case and band construction and components

client liaison techniques

power sources

power cells, batteries, capacitors and electronic storage units

occupational health and safety (OHS) regulations and procedures

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Watch functions and features

Watch functions and features may include:

quartz oscillating stage

dividing stage

motor drive output pulses

capacitive output signals

current consumption

pulse generation

lower working limit test

gear train freedom

Record and document repair process

Record and document repair process may include:

extent and date of repair

cost of replacement part

time spent on procedure

Appropriate working environment

Appropriate working environment may include:

suitable watchmakers' bench

clean and orderly work area (precautions taken to minimise dust)

adequate lighting and ventilation

ergonomic chair with adjustable height

Workshop tools and equipment

Workshop tools and equipment may include:

timing machine

multimeter

pulse generator

watch repair hand tools

case opening and closing tools

cleaning media

cleaning machines

lubricants

personal protective equipment

Movement and case components

Movement and case components may include:

quartz crystal

electronic circuits

coils

mechanical gear train

liquid crystal displays

watch glasses

case back

bezel (rotating)

crown

pendant

pushbuttons

Watch performance/rate testing

Watch performance/rate testing may include:

current consumption according to manufacturer specifications

rate testing (e.g. +0.25 - 0.3 seconds/day)

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Identify watch functions and features 
Prepare written quotation and inform customer of watch condition and performance concerns 
Outline recommended service procedures to be undertaken to remedy identified faults 
Verify and agree servicing requirements with customer 
Prepare watch for handover 
Record and document repair process 
Establish appropriate working environment 
Select and use workshop tools and equipment appropriately 
Open and close watch cases correctly 
Remove case movement and components without damaging or marking 
Verify gasket condition and replace if required 
Clean cases and bands, as required 
Inspect condition of watch case and movement components 
Confirm servicing requirements 
Replace faulty or worn component parts 
Clean components and parts 
Inspect watch case and movement components for cleanliness and rectify imperfections/faults 
Use correct tools and equipment for handling and servicing 
Reassemble watch case and movement components according to manufacturer specifications 
Confirm correct assembly of gear train and other components 
Use correct types and amounts of lubricant according to manufacturer specifications 
Use tools and equipment appropriately taking precautions for correct reassembly 
Verify/confirm watch functioning according to manufacturer specifications 
Verify watch performance including rate testing and adjust, as required, according to manufacturer specifications 

Forms

Assessment Cover Sheet

MEM21006A - Service quartz watches
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MEM21006A - Service quartz watches

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: