• MSACMG702A - Review manufacturing practice tools and techniques

Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MSACMG702A Mapping and Delivery Guide
Review manufacturing practice tools and techniques

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency MSACMG702A - Review manufacturing practice tools and techniques
Description This unit covers the application of continuous improvement to the use of competitive manufacturing tools and techniques; that is, facilitating the right use of the right tool at the right time and reviewing its application.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application This unit is intended for team leaders and people with a similar sphere of influence and scope of authority and responsibility. It covers the reviewing of competitive tools used by an organisation which has already embarked on a competitive manufacturing path and is driven by the pull of its customers.The unit includes checking that the relevant competitive manufacturing practice tools are being consistently and correctly applied across the entire organisation to enhance customer and organisation value. It also includes reviewing the processes used to identify when additional or different competitive manufacturing tools should be applied.This unit applies to individuals who have a broad knowledge of all major competitive tools with in-depth application knowledge of several tools which are relevant to the organisation and familiarity with a define, measure, analyse, improve, control (DMAIC) approach. This unit may also be applied to service organisations applying competitive manufacturing principles.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Review the use of competitive manufacturing tools
  • Identify which competitive tools are being used in the work area
  • Define the outcomes expected from each tool
  • Observe and measure the actual outcomes being achieved
  • Identify gaps between actual outcomes and planned outcomes
  • Determine if the tools are being used as intended
  • Review tool use and determine if the most appropriate tool is being used
  • Audit health, safety and environment (HSE) impacts from the use of tools
  • Identify any system/process issues impeding the tools delivering their expected outcomes
  • Identify any gaps between tool capability and customer benefit requirements
       
Element: Recommend changes to the use of competitive manufacturing tools
  • Define required further improvements identified
  • Prioritise required further improvements
  • Identify gaps inhibiting tool use
  • Recommend system and process changes as required to improve tool use
  • Recommend alternative or additional tools as required to achieve organisation requirements
  • Obtain required authorisations for changes
       
Element: Facilitate the better use of competitive manufacturing tools
  • Facilitate training or other resources needed as required to improve tool use
  • Facilitate system and process changes as required to improve tool use
  • Facilitate the introduction and use of new tools as required
  • Initiate procedures for sustaining the changes
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Demonstrates skills and knowledge required to:

critically review the use of competitive tools.

In particular look for evidence of:

taking a DMAIC approach

comparing actual outcomes to planned outcomes

discriminating between the causes of suboptimal performance

recommending appropriate changes to tools used, tool usage and/or tool implementation.

Context of and specific resources for assessment

Assessment may occur on the job or in an appropriately simulated environment. Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and to information on workplace practices and OHS practices.

Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate ethnicity, age, gender, demographics and disability.

Access must be provided to appropriate learning and/or assessment support when required. Where applicable, physical resources should include equipment modified for people with disabilities.

Method of assessment

Assessment must satisfy the endorsed assessment guidelines of the Manufacturing Training Package.

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge.

Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application.

Assessment may be applied under project related conditions (real or simulated) and require evidence of process.

Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.

Assessment may be in conjunction with assessment of other units of competency where required.

Guidance information for assessment

Assessment processes and techniques must be culturally appropriate and appropriate to the language and literacy capacity of the candidate and the work being performed.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

decision making

communication at all levels

situation analysis

analysis

Required knowledge

competitive manufacturing principles

competitive manufacturing tools, their applications and limitations

customer benefit

ways of determining competency gaps

DMAIC process applied to competitive manufacturing tool use

approvals and delegations within the organisation

procedures including processes for updating and drafting of procedures

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Review tool use

Review of tool use includes:

identifying whether a better tool could have been used and whether there is an appropriate balance between daily continuous improvement and kaizen blitz

Codes of practice/standards

Where reference is made to industry codes of practice, and/or Australian/international standards, the latest version must be used

Health, safety and environment (HSE)

All changes implemented are expected to be at least neutral, or preferably beneficial, in their impact on health, safety and environment

Outcomes

Outcomes include:

the benefits both to the organisation and also the customers

Define improvements

The definition of improvements may include:

a specification of the problem/capability gap being addressed

a specification of how that problem/gap will be solved/filled

a statement of the intended benefits of the solution

a statement of the indicators of progress and success

Organisation

Organisation includes:

any part of a manufacturing or service organisation

companies, government bodies or other body of people aiming to produce a product to service a customer

Competitive tools

Competitive tools are those techniques used to improve competitive manufacturing, typically described in the competitive manufacturing 'tools units' including:

5S

Just in Time (JIT)/kanban

quick changeover

root cause analysis

maintenance including failure mode effects analysis (FMEA), and mean time between failure (MTBF)

Team leader

Team leader may include:

any person who may have either a permanent or an ad hoc role in facilitating the function of a team in a workplace

Gaps inhibiting tool use

Gaps inhibiting tool use may include:

competency gap of employees in own or other value chain enterprise

lack of management or employee support

lack of financial or other resources

inadequate data

Sustaining improvement

Improvement may be sustained by including it in:

standard procedures and work instructions

standard practice

other relevant documents and practices

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Identify which competitive tools are being used in the work area 
Define the outcomes expected from each tool 
Observe and measure the actual outcomes being achieved 
Identify gaps between actual outcomes and planned outcomes 
Determine if the tools are being used as intended 
Review tool use and determine if the most appropriate tool is being used 
Audit health, safety and environment (HSE) impacts from the use of tools 
Identify any system/process issues impeding the tools delivering their expected outcomes 
Identify any gaps between tool capability and customer benefit requirements 
Define required further improvements identified 
Prioritise required further improvements 
Identify gaps inhibiting tool use 
Recommend system and process changes as required to improve tool use 
Recommend alternative or additional tools as required to achieve organisation requirements 
Obtain required authorisations for changes 
Facilitate training or other resources needed as required to improve tool use 
Facilitate system and process changes as required to improve tool use 
Facilitate the introduction and use of new tools as required 
Initiate procedures for sustaining the changes 

Forms

Assessment Cover Sheet

MSACMG702A - Review manufacturing practice tools and techniques
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

MSACMG702A - Review manufacturing practice tools and techniques

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: