• MSACMT271A - Use sustainable environmental practices

Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MSACMT271A Mapping and Delivery Guide
Use sustainable environmental practices

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency MSACMT271A - Use sustainable environmental practices
Description This unit covers the knowledge and skills needed to use and make improvements in sustainable environmental practices in production, maintenance and logistics.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application In a typical scenario, a team member will be aware of environmental resource use. Some of this is necessary but typically a large part of environmental resource use may be unnecessary waste and so should be eliminated or at least minimised. The team member will observe resource use and ensure it is according to the organisations plans and will also engage in continuous improvements for resource use. This unit requires the application of skills associated with applying workplace information on use of resources and managing own application of technology and workplace practices to minimise use and waste of resources.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Identify resource use
  • Identify resources used by processes in area of responsibility
  • Recognise the type/source of resource used
  • Identify sources of information to expand knowledge and understanding of resources used
       
Element: Comply with environmental obligations
  • Follow procedures to ensure there is no breach of environmental regulations/licence conditions
  • Identify situations related to job which may lead to a breach of regulations/licence conditions
       
Element: Follow resource conservation plans
  • Identify resource conservation plan/section of plan relevant to area of responsibility
  • Identify most efficient or appropriate equipment or processes to comply with conservation plans
  • Check resource use is in accordance with plan
  • Sort/recycle waste according to procedures
  • Note any uses which do not comply with plan
  • Take appropriate action specified in plan to bring resource use back in line with plans
  • Apply energy conservation plans to the use of equipment and tools
       
Element: Improve resource use
  • Identify waste of resource use
  • Recommend improvements to resource use
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, the range statement and the assessment guidelines for this training package.

Overview of assessment requirements

The competent team member will be able to identify the resource use of any/all part/s of the process and recommend better ways of using it.

What are the specific resource requirements for this unit?

Access to an organisation seeking to improve its resource usage.

What critical aspects of evidence are required to demonstrate competency in this unit?

Evidence of conformance to resource usage plans and suggestions for improvement should be available.

In what context should assessment occur?

Assessment needs to be conducted in an organisation where resource is a significant cost component or by project, simulation or case study.

Are there any other units which could or should be assessed with this unit or which relate directly to this unit?

This unit is related to:

MSACMT270A Use sustainable energy practices - which covers energy specifically, and

MSACMT671A Develop and manage sustainable environmental practices - which covers the higher skill levels.

What method of assessment should apply?

Assessors must be satisfied that the person can consistently perform the unit as a whole, as defined by the elements, Performance Criteria, skills and knowledge. A holistic approach should be taken to the assessment.

Assessors should gather sufficient, fair, valid, reliable, authentic and current evidence from a range of sources. Sources of evidence may include direct observation, reports from supervisors, peers and colleagues, project work, samples, organisation records and questioning. Assessment should not require language, literacy or numeracy skills beyond those required for the unit.

The assessee will have access to all techniques, procedures, information, resources and aids which would normally be available in the workplace.

The method of assessment should be discussed and agreed with the assessee prior to the commencement of the assessment.

What evidence is required for demonstration of consistent performance?

Evidence should be available from the daily routine of the job to show that there is consistent performance.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

analysis

basic mathematics

communication

problem solving

Required knowledge

the '3 Rs' - reduce, re-use, recycle

regulatory/licensing requirements relevant to the process/plant

types and sources of resource

basic principles of resource efficiency

process needs for resource

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Waste

Waste (also known as muda in the Toyota Production System and its derivatives) is any activity which does not contribute to customer benefit/features in the product.

Within manufacturing, categories of waste include:

excess production and early production

delays

movement and transport

poor process design

inventory

inefficient performance of a process

making defective items.

Waste for this unit may include activities which do not yield any benefit to the organisation or any benefit to the organisations customers.

Necessary waste

Necessary waste is any activity or cost which does not contribute directly to customer benefit/feature in the product, and which cannot be avoided (for example regulatory compliance and fixed costs). Necessary waste cannot be eliminated but should be managed.

Unnecessary waste

Unnecessary waste is any activity or cost which does not contribute directly to customer benefit/features in the product and can be avoided. Unnecessary waste should be eliminated as quickly as practical.

Resource

Resource is used to mean resources used by the process be it raw materials, components, process water, cooling water, cleaning water and so on.

Recognise

Recognition of type of resource is at an appropriate level for the person and the area and includes things like recognising steam/electric heating, cooling water/refrigerated cooling, raw materials waste materials.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Identify resources used by processes in area of responsibility 
Recognise the type/source of resource used 
Identify sources of information to expand knowledge and understanding of resources used 
Follow procedures to ensure there is no breach of environmental regulations/licence conditions 
Identify situations related to job which may lead to a breach of regulations/licence conditions 
Identify resource conservation plan/section of plan relevant to area of responsibility 
Identify most efficient or appropriate equipment or processes to comply with conservation plans 
Check resource use is in accordance with plan 
Sort/recycle waste according to procedures 
Note any uses which do not comply with plan 
Take appropriate action specified in plan to bring resource use back in line with plans 
Apply energy conservation plans to the use of equipment and tools 
Identify waste of resource use 
Recommend improvements to resource use 

Forms

Assessment Cover Sheet

MSACMT271A - Use sustainable environmental practices
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

MSACMT271A - Use sustainable environmental practices

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: