Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MSAPMSUP101A Mapping and Delivery Guide
Clean workplace or equipment

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency MSAPMSUP101A - Clean workplace or equipment
Description This competency covers general housekeeping duties, as well as the cleaning of plant and equipment. This competency is typically demonstrated by all operators working either independently or as part of a work team.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application Application of this unitThis competency applies to personnel who are required to keep the work area, plant and equipment clean and tidy. The key factors are the identification, scheduling and performance of housekeeping requirements. This may include:identifying the range and scope of work requiredchecking if any type of permit has been issued for the work knowing site safety and housekeeping standardsadequately preparing to undertake the work, including obtaining all necessary safety equipment and PPEscheduling housekeeping dutieshandling chemicals and solvents safelykeeping assigned plant and equipment clean.undertaking the work strictly in accordance with the provisions of any permitcompleting work in accordance with requirementsmoving work and waste materials to designated locationsquerying or raising matters about the scope of work if it varies from that normally undertakencompleting the work in accordance with procedures and obtaining appropriate sign off as required.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites PrerequisitesThis unit has no prerequisites.
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Identify housekeeping requirements.
  • Explain and understand site safety and housekeeping standards.
  • Undertake housekeeping inspection in accordance with procedures/work instructions.
  • Identify and schedule housekeeping requirements as appropriate.
       
Element: Perform general housekeeping duties.
  • Keep designated work areas clean to organisation specific standards.
  • Keep designated work areas clear of obstructions.
  • Handle and use chemicals and solvents as per the manufacturer guidelines and company specifications.
  • Ensure work area is ready for next user.
  • Remove work materials to designated locations.
       
Element: Clean plant and equipment.
  • Keep assigned plant and equipment clean following established organisation procedures.
  • Perform specialised cleaning procedures as required.
  • Ensure that appropriate personal protective equipment is used as required.
       
Element: Dispose of waste materials.
  • Correctly identify waste materials.
  • Remove waste materials to a designated location.
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, required skills and knowledge, the Range Statement and the Assessment Guidelines for this Training Package.

Overview of assessment

A holistic approach should be taken to the assessment.

Assessors must be satisfied that the person can consistently perform the unit as a whole, as defined by the Elements, Performance Criteria and skills and knowledge.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

It is essential that competence is demonstrated in the knowledge and skills defined in this unit. These may include the ability to recognise and analyse potential situations requiring action and then in implementing appropriate corrective action.

Consistent performance should be demonstrated. For example, look to see that:

early warning signs for work areas in need of cleaning are recognised

work areas are kept tidy and clean

equipment and/or materials is/are neatly stored, in a safe manner, in the correct location at all times when not in use

equipment is always tidy and safe when in use.

Assessment method and context

Assessment will occur using industrial equipment and will be undertaken in a work-like environment.

Competence in this unit may be assessed:

in the operation of all ancillary equipment to the level required for this competency unit

by using a suitable simulation and/or a range of case studies/scenarios

through a combination of these techniques.

In all cases it is expected that practical assessment will be combined with targeted questioning to assess the underpinning knowledge and theoretical assessment will be combined with appropriate practical/simulation or similar assessment. Assessors need to be aware of any cultural issues that may affect responses to questions.

Assessment processes and techniques must be culturally appropriate and appropriate to the oracy, language and literacy capacity of the assessee and the work being performed.

Specific resources for assessment

This section should be read in conjunction with the Range Statement for this unit of competency. Resources required include suitable access to an operating plant or equipment that allows for appropriate and realistic simulation. A bank of case studies/scenarios and questions will also be required to the extent that they form part of the assessment method. Questioning may take place either in the workplace, or in an adjacent, quiet facility such as an office or lunchroom. No other special resources are required.

Access must be provided to appropriate learning and/or assessment support when required. Where applicable, physical resources should include equipment modified for people with disabilities.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

This describes the essential skills and knowledge and their level required for this unit.

Knowledge and understanding of the process sufficient to recognise non-standard situations and then determine an appropriate action which is consistent with operating guidelines.

Knowledge of organisation standard procedures and work instructions and relevant regulatory requirements, along with the ability to implement them within appropriate time constraints and in a manner relevant to the operation of the process.

Competence includes the ability to:

apply and describe:

duty of care

requirements for housekeeping process

procedures for plant maintenance

safe handling procedures

the standard of cleanliness required.

distinguish between:

re-usable materials and waste

routine and special cleaning needs.

plan own work, including predicting consequences and identifying improvements

use PPE

safely handle products and materials

read relevant safety information and apply safety precautions appropriate to the task/ relevant to the practical operation of the process.

Language, literacy and numeracy requirements

This unit requires the ability to read and interpret typical product specifications, job sheets and material labels as provided to operators.

Writing is required to the level of completing workplace forms.

Basic numeracy is required, e.g. to determine that two 25 kg bags are needed to make up a requirement for 50 kg.

The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts.

Where reference is made to industry codes of practice, and/or Australian/international standards, the latest version must be used.

Context

This competency unit may vary between organisations depending upon a range of practices and procedures, with consideration given to plant configuration and process.

Procedures

All operations are performed in accordance with procedures.

Procedures include all relevant workplace procedures, work instructions, temporary instructions and relevant industry and government codes and standards.

Tools and equipment

This competency includes use of equipment and tools such as:

cleaning equipment and materials

brooms

shovels

solvents

waste containers

safety equipment.

Hazards

Typical hazards include:

materials or equipment obstructing work areas

heat, smoke, dust or other atmospheric hazards

sharp edges, protrusions or obstructions

limited head spaces or overhangs

equipment or product mass

slippery surfaces, spills or leaks

noise, rotational equipment or vibration

Problems

'Respond to routine problems' means 'apply known solutions to a limited range of predictable problems'.

Typical process and product problems may include:

correct equipment not immediately available

safety issues associated with housekeeping and/or cleaning

ensuring that process aids rather than interferes with production.

Variables

Key variables to be monitored include:

housekeeping and/or cleaning methods and procedures

the type of tools and equipment used in special situations

the use of personal protective equipment.

correct use of tools

waste collection and disposal

conformance with frequency and quality of organisational reporting requirements

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Explain and understand site safety and housekeeping standards. 
Undertake housekeeping inspection in accordance with procedures/work instructions. 
Identify and schedule housekeeping requirements as appropriate. 
Keep designated work areas clean to organisation specific standards. 
Keep designated work areas clear of obstructions. 
Handle and use chemicals and solvents as per the manufacturer guidelines and company specifications. 
Ensure work area is ready for next user. 
Remove work materials to designated locations. 
Keep assigned plant and equipment clean following established organisation procedures. 
Perform specialised cleaning procedures as required. 
Ensure that appropriate personal protective equipment is used as required. 
Correctly identify waste materials. 
Remove waste materials to a designated location. 

Forms

Assessment Cover Sheet

MSAPMSUP101A - Clean workplace or equipment
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

MSAPMSUP101A - Clean workplace or equipment

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: