Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MSATMINS301A Mapping and Delivery Guide
Inspect a range of simple measures

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency MSATMINS301A - Inspect a range of simple measures
Description This unit of competency covers the ability to apply National Test Procedures to determine whether simple measures are suitable for trade use. The unit also involves auditing the performance of verifiers who have previously tested and marked simple measures for trade use.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application This unit of competency is applicable to trade measurement inspectors appointed under national measurement legislation who may inspect a wide range of simple measures as part of their allocated duties. Simple measures such as trade masses, length measures and volume measures are used in a wide variety of commerce including retail, hospitality, pharmaceuticals and laboratory services.Industry representatives have provided case studies to illustrate the practical application of this unit of competency and to show its relevance in a workplace setting. These are found at the end of this unit of competency under the section 'This competency in practice'.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for inspection
  • Identify and evaluate the type of simple measure to be inspected
  • Access and review any history of previous inspections at trader's premises
  • Access and correctly interpret appropriate documentation required for the inspection
  • Identify and access test equipment, products and consumables required for the inspection
  • Ensure specified test equipment is fit for purpose in accordance with applicable legislation and organisational procedures
  • Store and transport test equipment in accordance with organisational procedures and industry best practice
  • Identify workplace health and safety issues relevant to the inspection
       
Element: Initiate inspection
  • Identify the site contoller, explain the purpose of the inspection and produce formal identification, if required
  • Identify relevant site health and safety issues and implement appropriate control strategies
  • Conduct a preliminary evaluation of the site's trading practices and prioritise activities to maximise inspection outcomes
  • Identify trade measuring instruments and plan inspection to minimise disruption to the public and trader
       
Element: Evaluate simple measure performance
  • Evaluate whether the operating environment will impact on simple measure performance
  • Modify the operating environment or implement alternative arrangements to ensure reliable test conditions as necessary
  • Identify the maximum permissible errors for the simple measure from the legislative requirements
  • Use test equipment safely in accordance with applicable legislation and organisational procedures
  • Check simple measure for compliance with the appropriate Certificates of Approval
  • Inspect the simple measure in accordance with relevant National Test Procedure and appropriate National Measurement Institute policy
  • Evaluate results against prescribed performance criteria and determine if the simple measure is suitable for trade use in accordance with legislative requirements
       
Element: Conduct a verifier performance audit
  • Identify the scope of the verifier audit
  • Identify the expected outcomes of the verifier audit
  • Assess the verifier's performance against the expected outcome
  • Analyse any variances from the expected outcomes to identify any isolated or systemic problem
       
Element: Analyse and report inspection results
  • Analyse inspection data for unacceptable performance trends
  • Display the inspection result on the simple measure in accordance with legislative requirements
  • Use test reports to present inspection results in the required format
  • Complete inspection documentation in accordance with legislative requirements and organisational procedures
  • Communicate inspection results within the specified time and in accordance with organisational guidelines
  • Recommend follow-up actions as appropriate
       
Element: Act on non-compliance
  • Select applicable enforcement action for the non-compliance in accordance with legislative requirements, organisational policy and procedures
  • Inform traders of non-compliances and consequences of failing to have them corrected
  • Implement enforcement action in accordance with legislative requirements, organisational policy and procedures
  • Maintain the rights of the trader at all times
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Competency must be demonstrated in the ability to perform consistently at the required standard for any class of simple measures listed in the Range Statement.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessors should ensure that candidates can:

identify, access and apply test procedures

identify and use suitable reference standards

evaluate and adjust the impact of the operating environment on the performance of simple measures

analyse test results to determine the simple measure's suitability for verification (trade use)

identify the scope of a verifier performance audit and assess results with expected outcomes

audit the performance of verifiers of simple measures

identify and implement additional inspection strategies for non-instrument related breaches of national measurement legislation

recognise and act on non-compliance

maintain the security and confidentiality of data in accordance with organisational and regulatory requirements

report results in the required formats and expected timeframe.

Context of and specific resources for assessment

This unit of competency is to be assessed in the workplace or simulated workplace environment.

This unit of competency may be assessed with:

MSATMREF301A Use and maintain reference standards.

Resources may include:

simple measures, test equipment and reference standards

computer and relevant software and/or organisation information management system

Certificates of Approval for simple measures

relevant legislative and organisational procedures.

Method of assessment

The following assessment methods are suggested:

questions to assess understanding of relevant procedures, licensing requirements, trader obligations and remedial actions

review of inspection reports and verifier performance audit reports prepared by the candidate

feedback from supervisors and peers regarding the candidate's ability to verify the performance of simple measures in accordance with legislative and organisational procedures

observation of the candidate conducting an inspection.

In all cases, practical assessment should be supported by questions to assess underpinning knowledge and those aspects of competency which are difficult to assess directly. Questioning techniques should suit the language and literacy levels of the candidate.

This competency in practice

Industry representatives have provided the case studies below to illustrate the practical application of this unit of competency and to show its relevance in a workplace setting.

An inspector makes an unannounced visit to a manufacturer's premises that packages turpentine, linseed oil, kerosene and methylated spirits. His/her visit identifies that a 5L verified conical measure is being used for trade to check the volume of pre-packaged articles. He/she visually inspects the measure for compliance with the relevant Certificate of Approval and checks the existing certifying marks. The verifier notices that the volume measure is dented. He/she then tests the accuracy of the measure using a suitable 5L reference standard and finds it to be outside the maximum permissible error. He/she notifies the manager of this non-compliance and advises that any further use of this measure will result in enforcement action. On returning to their office, the inspector reports the need to inspect the premises and market place for inaccurate pre-packaged items manufactured by the company.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

accessing, interpreting and applying a range of documents for the inspection of simple measures including:

national measurement legislation

routine National Test Procedures

Certificates of Approval

National Measurement Institute inspection policy

Australian Standards

accessing and interpreting Certificates of Verification for a limited range of reference standards

use routine communication and negotiation skills to:

explain the purpose of inspection

inform traders of non-compliances and consequences of failing to rectify them

explain procedures and inspection outcomes to traders, verifiers and managers

accessing, transporting, setting up, validating, using and maintaining a limited range of test equipment and reference standards

identifying and evaluating environmental impacts on performance of a range of simple measures

conducting tests and recording results with close attention to detail and accuracy

performing calculations involving fractions, decimals, ratios, proportions and percentages

using scientific notation, correct units and the correct number of significant figures

analysing performance results over a single or limited range of operating conditions

identifying non-compliances with national measurement legislation relating to simple measure or verifier performance and initiate appropriate enforcement action including warning, infringement notice, undertaking, injunction and prosecution

identifying potential trading practice non-compliance with national measurement legislation and initiating an appropriate inspection strategy

planning routine tasks

developing/implementing an efficient inspection strategy that has a limited impact on others

demonstrating professionalism and maintaining the rights of the trader at all times

solving routine/expected problems

working safely

Required knowledge

general chemical and physical principles and concepts including:

weight, mass, gravity and density

temperature effects and coefficients of expansion

basic knowledge of the operating procedures across a limited range of environments including laboratories, retail and manufacturing

knowledge of metrological terms and terminology specific to simple measures such as:

maximum permissible errors

traceability

error of measurement

error of indication

national measurement legislation applicable to simple measures

detailed knowledge of National Test Procedures and operating procedures for equipment and reference standards used in job role including:

purpose of test

test conditions and possible environmental impacts on performance of simple measure

key preparation/measurement steps in test method

calculation steps to give results in appropriate units and precision

maximum permissible errors for simple measures under inspection

procedures for completing inspection documentation

organisational policy and procedures for inspecting simple measures

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Appropriate documentation

Where reference is made to documentation, it is expected the latest version will be used.

Appropriate documentation may include:

reference standards

Certificates of Verification

Certificates of Approval for simple measures

test procedures for verifying simple measures

organisational test reports

organisational procedures e.g. company quality assurance manual

National Measurement Act

occupational health and safety (OHS) regulations, guidelines and procedures and material safety data sheets (MSDS)

equipment manuals and warranty, supplier catalogues, and handbooks

National Measurement Institute policy

Australian Standards

Certificates of Approval

Certificates of Approval may include:

any Certificate issued by the Chief Metrologist under Regulation 60 of the National Measurement Regulations approving the pattern of a simple measure as being suitable for trade

Test equipment

Test equipment may include:

reference standards of measurement

equipment other than reference standards of measurement such as weighing instruments, strikes and funnels

Legislation

Legislation may include:

national measurement legislation

applicable Commonwealth, state and territory OHS legislation

National Test Procedures for simple measures

National Test Procedures for simple measures may include:

length measures

alcoholic beverage measures

lubricating oil measures

graduated measures

pharmaceutical measures

trade masses

any other test procedure prescribed by the National Measurement Institute

OHS and environmental management requirements

OHS and environmental management requirements refers to:

all operations must comply with enterprise OHS and environmental management requirements, which may be imposed through state/territory or Federal legislation. These requirements must not be compromised at any time

all operations assume the potentially hazardous nature of samples and require standard precautions to be applied

where relevant, users should access and apply current industry understanding of infection control issued by the National Health and Medical Research Council and State and Territory Departments of Health

Operating environmental impacts

Operating environment impacts may include:

vibration

wind

heat

dust

electromagnetic interference

out of level

Records

Records may include:

test reports

safety procedures

a history of equipment calibration and test results

Simple measures

Inspectors may be required to test and mark any of the classes of simple measures from the following list.

Simple measures may include:

length measures

alcoholic beverage measures

lubricating oil measures

graduated measures

pharmaceutical measures

trade masses

any other simple measure prescribed by the National Measurement Institute

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Identify and evaluate the type of simple measure to be inspected 
Access and review any history of previous inspections at trader's premises 
Access and correctly interpret appropriate documentation required for the inspection 
Identify and access test equipment, products and consumables required for the inspection 
Ensure specified test equipment is fit for purpose in accordance with applicable legislation and organisational procedures 
Store and transport test equipment in accordance with organisational procedures and industry best practice 
Identify workplace health and safety issues relevant to the inspection 
Identify the site contoller, explain the purpose of the inspection and produce formal identification, if required 
Identify relevant site health and safety issues and implement appropriate control strategies 
Conduct a preliminary evaluation of the site's trading practices and prioritise activities to maximise inspection outcomes 
Identify trade measuring instruments and plan inspection to minimise disruption to the public and trader 
Evaluate whether the operating environment will impact on simple measure performance 
Modify the operating environment or implement alternative arrangements to ensure reliable test conditions as necessary 
Identify the maximum permissible errors for the simple measure from the legislative requirements 
Use test equipment safely in accordance with applicable legislation and organisational procedures 
Check simple measure for compliance with the appropriate Certificates of Approval 
Inspect the simple measure in accordance with relevant National Test Procedure and appropriate National Measurement Institute policy 
Evaluate results against prescribed performance criteria and determine if the simple measure is suitable for trade use in accordance with legislative requirements 
Identify the scope of the verifier audit 
Identify the expected outcomes of the verifier audit 
Assess the verifier's performance against the expected outcome 
Analyse any variances from the expected outcomes to identify any isolated or systemic problem 
Analyse inspection data for unacceptable performance trends 
Display the inspection result on the simple measure in accordance with legislative requirements 
Use test reports to present inspection results in the required format 
Complete inspection documentation in accordance with legislative requirements and organisational procedures 
Communicate inspection results within the specified time and in accordance with organisational guidelines 
Recommend follow-up actions as appropriate 
Select applicable enforcement action for the non-compliance in accordance with legislative requirements, organisational policy and procedures 
Inform traders of non-compliances and consequences of failing to have them corrected 
Implement enforcement action in accordance with legislative requirements, organisational policy and procedures 
Maintain the rights of the trader at all times 

Forms

Assessment Cover Sheet

MSATMINS301A - Inspect a range of simple measures
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

MSATMINS301A - Inspect a range of simple measures

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: