Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MSFFDT5004 Mapping and Delivery Guide
Construct custom furniture using advanced techniques

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency MSFFDT5004 - Construct custom furniture using advanced techniques
Description
Employability Skills
Learning Outcomes and Application This unit of competency covers constructing original and unique custom furniture using or adapting traditional and innovative construction techniques. It includes interpreting and adapting design specifications that are compatible with the product material, purpose and style of the furniture and involves application of skills and knowledge at a highly skilled artisan level. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must:

hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors

have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification

be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.

Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.

Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.

Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.

Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.

Access is required to an agreed unique and innovative furniture construction requirement/project, appropriate materials, tools, equipment and specifications relevant to constructing custom furniture.

Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare for work
  • Applicable work health and safety (WHS), legislative and organisational requirements relevant to constructing custom furniture are verified and complied with
  • Instructions, plans and design documents are read and interpreted to identify furniture construction and finishing requirements
  • Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition
  • Product purpose, context, furniture style and construction materials are identified
  • Work sequence covering each step in the construction process, including sub-assemblies, is planned and documented to enterprise requirements
  • Quality checking procedures are developed and documented for each step in the construction process
       
Element: Curve and shape components
  • Techniques for bending, forming and shaping components are identified, evaluated and confirmed as being appropriate for the construction requirement
  • Component specifications are set out according to work instructions and materials marked according to industry practices
  • Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications
  • Materials are bent, formed and shaped in accordance with the production plan and workplace procedures
  • Components are checked against specified tolerances, fit and accuracy
       
Element: Veneer components
  • Suitable veneer material is identified, evaluated and selected
  • Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications
  • Veneer components and materials are measured, marked and cut to size
  • Veneers are prepared for application and laid out
  • Suitable joining processes to backing and adjacent veneers are selected and prepared
  • Adhesives are applied according to workplace procedures and/or manufacturer instructions
  • Rough veneering components are produced in accordance with the production plan and workplace procedures, including the use of protective equipment
  • Final trim and finishing are completed to specifications
  • Work is checked against required quality standards
  • Any non-conformity with the required quality standard is rectified
       
Element: Make joints
  • Joints are identified and type of joint to be used is selected and adapted/designed as necessary
  • Tools, adhesives and fasteners are selected to match the joint type
  • Cutting and joining lines are marked out to suit joint type
  • Measurements and calculations are checked for accuracy to ensure quality outcomes
  • Material features are identified and optimal usage criteria are observed
  • Material is cut to specification, inspected and prepared for joining
  • Material is joined in accordance with the job specifications
  • Fasteners and adhesives are used to make joints firm where required
  • Finished joint is checked against quality requirements
       
Element: Construct sub-assemblies
  • Components and materials, including adhesives, trims and accessories, and tools, are laid out in accordance with the assembly plan
  • Components are checked against specification prior to assembly and out of specification items are rejected
  • Sub-assemblies are assembled using appropriate tools, jigs and fixtures and checked against specification for accuracy, fit, twist and distortion
  • Sub-assembly quality is checked against plans at identified checkpoints
       
Element: Assemble custom furniture
  • Components, sub-assemblies and materials, including adhesives, trims and accessories, and tools, are laid out in accordance with the assembly plan
  • Components and sub-assemblies are checked against specification prior to assembly and out of specification items are rejected
  • Components are assembled, fitted using appropriate tools, jigs and fixtures, and checked against specification for accuracy, fit, twist and distortion
  • Hardware and decorative accessories are applied to specification
  • Product is prepared for final finish, including the removal of bruises, scratches, dents and marks
  • Product quality is checked against plans at identified checkpoints
       
Element: Finish furniture surface
  • Using samples of the type of material surface and specified finish, various finishing options are evaluated and the preferred option is selected
  • Sample of material is tested with selected finishing technique to ensure appropriateness
  • Furniture surface is prepared in accordance with the finishing specification
  • Imperfections, pores or nail or screw holes on the surface are rectified
  • Finishing processes and materials are applied in accordance with the agreed specifications
  • Surface is polished or buffed depending on the shine required
  • Work is checked against required quality standards
  • Any non-conformity with the required quality standards is rectified
       
Element: Complete housekeeping
  • Unused materials are stored or recycled as required
  • Tools and equipment are cleaned and stored appropriately
  • Faulty or defective equipment is tagged and reported in accordance with workplace practices
  • Work area is cleaned and rubbish disposed of appropriately
  • Workplace documentation and/or reports are completed, including time log for operations for costing and business improvement activities
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Plan and prepare for work

1.1

Applicable work health and safety (WHS), legislative and organisational requirements relevant to constructing custom furniture are verified and complied with

1.2

Instructions, plans and design documents are read and interpreted to identify furniture construction and finishing requirements

1.3

Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition

1.4

Product purpose, context, furniture style and construction materials are identified

1.5

Work sequence covering each step in the construction process, including sub-assemblies, is planned and documented to enterprise requirements

1.6

Quality checking procedures are developed and documented for each step in the construction process

2

Curve and shape components

2.1

Techniques for bending, forming and shaping components are identified, evaluated and confirmed as being appropriate for the construction requirement

2.2

Component specifications are set out according to work instructions and materials marked according to industry practices

2.3

Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications

2.4

Materials are bent, formed and shaped in accordance with the production plan and workplace procedures

2.5

Components are checked against specified tolerances, fit and accuracy

3

Veneer components

3.1

Suitable veneer material is identified, evaluated and selected

3.2

Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications

3.3

Veneer components and materials are measured, marked and cut to size

3.4

Veneers are prepared for application and laid out

3.5

Suitable joining processes to backing and adjacent veneers are selected and prepared

3.6

Adhesives are applied according to workplace procedures and/or manufacturer instructions

3.7

Rough veneering components are produced in accordance with the production plan and workplace procedures, including the use of protective equipment

3.8

Final trim and finishing are completed to specifications

3.9

Work is checked against required quality standards

3.10

Any non-conformity with the required quality standard is rectified

4

Make joints

4.1

Joints are identified and type of joint to be used is selected and adapted/designed as necessary

4.2

Tools, adhesives and fasteners are selected to match the joint type

4.3

Cutting and joining lines are marked out to suit joint type

4.4

Measurements and calculations are checked for accuracy to ensure quality outcomes

4.5

Material features are identified and optimal usage criteria are observed

4.6

Material is cut to specification, inspected and prepared for joining

4.7

Material is joined in accordance with the job specifications

4.8

Fasteners and adhesives are used to make joints firm where required

4.9

Finished joint is checked against quality requirements

5

Construct sub-assemblies

5.1

Components and materials, including adhesives, trims and accessories, and tools, are laid out in accordance with the assembly plan

5.2

Components are checked against specification prior to assembly and out of specification items are rejected

5.3

Sub-assemblies are assembled using appropriate tools, jigs and fixtures and checked against specification for accuracy, fit, twist and distortion

5.4

Sub-assembly quality is checked against plans at identified checkpoints

6

Assemble custom furniture

6.1

Components, sub-assemblies and materials, including adhesives, trims and accessories, and tools, are laid out in accordance with the assembly plan

6.2

Components and sub-assemblies are checked against specification prior to assembly and out of specification items are rejected

6.3

Components are assembled, fitted using appropriate tools, jigs and fixtures, and checked against specification for accuracy, fit, twist and distortion

6.4

Hardware and decorative accessories are applied to specification

6.5

Product is prepared for final finish, including the removal of bruises, scratches, dents and marks

6.6

Product quality is checked against plans at identified checkpoints

7

Finish furniture surface

7.1

Using samples of the type of material surface and specified finish, various finishing options are evaluated and the preferred option is selected

7.2

Sample of material is tested with selected finishing technique to ensure appropriateness

7.3

Furniture surface is prepared in accordance with the finishing specification

7.4

Imperfections, pores or nail or screw holes on the surface are rectified

7.5

Finishing processes and materials are applied in accordance with the agreed specifications

7.6

Surface is polished or buffed depending on the shine required

7.7

Work is checked against required quality standards

7.8

Any non-conformity with the required quality standards is rectified

8

Complete housekeeping

8.1

Unused materials are stored or recycled as required

8.2

Tools and equipment are cleaned and stored appropriately

8.3

Faulty or defective equipment is tagged and reported in accordance with workplace practices

8.4

Work area is cleaned and rubbish disposed of appropriately

8.5

Workplace documentation and/or reports are completed, including time log for operations for costing and business improvement activities

Collect, organise and understand information related to furnishing work instructions and work orders and safety procedures

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Identify materials used in the work process

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

maintain required production output and product quality

Complete all aspects of the construction and finishing of two (2) furniture items requiring advanced construction techniques and satisfying high-quality custom-made furniture standards and expectations in terms of innovation, complexity, tolerance and fit of components and quality

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Lead others and work effectively to improve production quality and outcomes

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Use workplace technology related to the coordination, including communication equipment, time and management aids and other measuring devices

Minimise wastage of resources, including materials, time and money

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity and encourage participation of employees in the planning of work activities and changes

State or territory WHS legislation, regulations, standards and codes of practice relevant to moisture suppressants and barrier systems

Organisational, workshop and site standards, requirements, policies and procedures for the construction of custom furniture

Types of tools and equipment used in construction and procedures for their safe use, operation and maintenance

Work flow techniques appropriate for the management of the construction work/project

Presentation and interpretation of plan representation of a furniture design

Techniques for timber bending, forming and shaping

Techniques for the preparation of drawings/set-outs/rods and geometrical concepts

Types, characteristics, uses and limitations of materials

Techniques for the manufacture and application of veneers

Techniques for assembly, fixing and finishing of custom furniture components

Types, characteristics, uses, limitations and safety requirements of adhesives, fasteners and hardware used in custom furniture assembly

Matching requirements of adhesives and fasteners to timbers/materials used

Finishing techniques

Characteristics, properties and selection criteria of finishing materials

Finishing characteristics and properties of timber being used

Environmental protection requirements

Established communication channels and protocols

Relevant problem identification and resolution

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Plan and prepare for work

1.1

Applicable work health and safety (WHS), legislative and organisational requirements relevant to constructing custom furniture are verified and complied with

1.2

Instructions, plans and design documents are read and interpreted to identify furniture construction and finishing requirements

1.3

Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition

1.4

Product purpose, context, furniture style and construction materials are identified

1.5

Work sequence covering each step in the construction process, including sub-assemblies, is planned and documented to enterprise requirements

1.6

Quality checking procedures are developed and documented for each step in the construction process

2

Curve and shape components

2.1

Techniques for bending, forming and shaping components are identified, evaluated and confirmed as being appropriate for the construction requirement

2.2

Component specifications are set out according to work instructions and materials marked according to industry practices

2.3

Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications

2.4

Materials are bent, formed and shaped in accordance with the production plan and workplace procedures

2.5

Components are checked against specified tolerances, fit and accuracy

3

Veneer components

3.1

Suitable veneer material is identified, evaluated and selected

3.2

Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications

3.3

Veneer components and materials are measured, marked and cut to size

3.4

Veneers are prepared for application and laid out

3.5

Suitable joining processes to backing and adjacent veneers are selected and prepared

3.6

Adhesives are applied according to workplace procedures and/or manufacturer instructions

3.7

Rough veneering components are produced in accordance with the production plan and workplace procedures, including the use of protective equipment

3.8

Final trim and finishing are completed to specifications

3.9

Work is checked against required quality standards

3.10

Any non-conformity with the required quality standard is rectified

4

Make joints

4.1

Joints are identified and type of joint to be used is selected and adapted/designed as necessary

4.2

Tools, adhesives and fasteners are selected to match the joint type

4.3

Cutting and joining lines are marked out to suit joint type

4.4

Measurements and calculations are checked for accuracy to ensure quality outcomes

4.5

Material features are identified and optimal usage criteria are observed

4.6

Material is cut to specification, inspected and prepared for joining

4.7

Material is joined in accordance with the job specifications

4.8

Fasteners and adhesives are used to make joints firm where required

4.9

Finished joint is checked against quality requirements

5

Construct sub-assemblies

5.1

Components and materials, including adhesives, trims and accessories, and tools, are laid out in accordance with the assembly plan

5.2

Components are checked against specification prior to assembly and out of specification items are rejected

5.3

Sub-assemblies are assembled using appropriate tools, jigs and fixtures and checked against specification for accuracy, fit, twist and distortion

5.4

Sub-assembly quality is checked against plans at identified checkpoints

6

Assemble custom furniture

6.1

Components, sub-assemblies and materials, including adhesives, trims and accessories, and tools, are laid out in accordance with the assembly plan

6.2

Components and sub-assemblies are checked against specification prior to assembly and out of specification items are rejected

6.3

Components are assembled, fitted using appropriate tools, jigs and fixtures, and checked against specification for accuracy, fit, twist and distortion

6.4

Hardware and decorative accessories are applied to specification

6.5

Product is prepared for final finish, including the removal of bruises, scratches, dents and marks

6.6

Product quality is checked against plans at identified checkpoints

7

Finish furniture surface

7.1

Using samples of the type of material surface and specified finish, various finishing options are evaluated and the preferred option is selected

7.2

Sample of material is tested with selected finishing technique to ensure appropriateness

7.3

Furniture surface is prepared in accordance with the finishing specification

7.4

Imperfections, pores or nail or screw holes on the surface are rectified

7.5

Finishing processes and materials are applied in accordance with the agreed specifications

7.6

Surface is polished or buffed depending on the shine required

7.7

Work is checked against required quality standards

7.8

Any non-conformity with the required quality standards is rectified

8

Complete housekeeping

8.1

Unused materials are stored or recycled as required

8.2

Tools and equipment are cleaned and stored appropriately

8.3

Faulty or defective equipment is tagged and reported in accordance with workplace practices

8.4

Work area is cleaned and rubbish disposed of appropriately

8.5

Workplace documentation and/or reports are completed, including time log for operations for costing and business improvement activities

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

work requires individuals to demonstrate conceptual and analytical ability, discretion, judgement and problem solving

customers or suppliers may be internal or external

Instructions include:

workplace procedures relating to the use and operation of tools and equipment

production planning figures

workplace instructions:

job sheets

set-outs

plans

specifications

drawings and designs

workplace procedures relating to reporting and communications

manufacturer instructions for the use of equipment and materials

Shaping, bending and forming techniques include:

steam/heat bending

curfing

pressure bending

shaping by hand or static machine

Shaped components include:

timber shaped by hand or static machine tools

Cutting and shaping tools and equipment include:

measuring tapes and rules

hammers

mallets

squares

bevels

chisels

planes

hand saws

power saws

power drills/screwdrivers

pneumatic tools

clamps

screwdrivers

pincers

rasps

surface planers

panel planers

belt sanders

horizontal borers

vertical drill presses

table saws

dove-tailers

pedestal grinders

wood turning lathes

veneer guillotines

presses

Materials include:

timber

glass

metal

manufactured board

furniture hardware

adhesives

screws

nails

dowels

decorative finishes

finishing material

Veneering tools and equipment include:

knives

chisels

measuring tapes or rules

mallets

squares

levels

planes

band saws

power saws

pneumatic tools

vacuum bags and presses

clamps

moulds

jigs and fixtures

rollers

laminate trimmers

cutters and hand routers

sandpaper

wire wool

sanding block

Veneered components include:

thin slices of wood, usually thinner than 3 mm (1/8"), which is usually glued onto a substrate

Veneer materials include:

timber

manufactured board

laminates

timber strips

adhesives

cleaning materials

tapes

Joints and variations of joints for custom furniture include:

dowel

mortise and tenon

dovetail

lap joint

biscuit joint

finger joint

housing joint

mitre

bridle joints

Jointing tools and equipment include:

chisels

mallets

mortise gauges

vernier callipers

vices

dovetail saws

tenon saws

coping saws

planes

files

hand drills

power drills

dowel jigs

power routers

jigs and fixtures

portable biscuit machines

power saws

Jointing materials include:

timber (both indigenous and overseas)

adhesives

fasteners

Sub-assembly includes:

part-constructions of the main assembly needed to allow for gluing and clamping of internal and intricate parts of the furniture item

Assembly materials include:

timber (both indigenous and overseas)

adhesives

screws

dowels

furniture hardware

glass

decorative finishes

Assembly tools and equipment include:

measuring tapes or rules

hammers

mallets

squares

clamps

presses

Furniture surface preparation includes:

sanding by hand or power sander

scraping

planing

other smoothing techniques

and is to take account of the fact that the wood’s colour may be changed by staining, bleaching, painting, ammonia fuming and/or a number of other techniques

Surface filling includes:

using wood plugs or other fillers

Finishing processes and materials include:

waxing

shellacking

nitrocellulose lacquering

conversion lacquering

linseed oiling

tung oiling

alkyd varnishing

polyurethane varnishing

water-based polyurethane and/or oil-varnish mixes

Personal protective equipment includes:

that prescribed under legislation, regulations and enterprise policies and practices

Information and procedures include:

work procedures/instructions

manufacturer specifications and instructions

standard forms of workplace process and procedures

organisation work specifications and requirements

legislation, regulations and codes of practice

quality and Australian Standards and procedures

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Applicable work health and safety (WHS), legislative and organisational requirements relevant to constructing custom furniture are verified and complied with 
Instructions, plans and design documents are read and interpreted to identify furniture construction and finishing requirements 
Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition 
Product purpose, context, furniture style and construction materials are identified 
Work sequence covering each step in the construction process, including sub-assemblies, is planned and documented to enterprise requirements 
Quality checking procedures are developed and documented for each step in the construction process 
Techniques for bending, forming and shaping components are identified, evaluated and confirmed as being appropriate for the construction requirement 
Component specifications are set out according to work instructions and materials marked according to industry practices 
Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications 
Materials are bent, formed and shaped in accordance with the production plan and workplace procedures 
Components are checked against specified tolerances, fit and accuracy 
Suitable veneer material is identified, evaluated and selected 
Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications 
Veneer components and materials are measured, marked and cut to size 
Veneers are prepared for application and laid out 
Suitable joining processes to backing and adjacent veneers are selected and prepared 
Adhesives are applied according to workplace procedures and/or manufacturer instructions 
Rough veneering components are produced in accordance with the production plan and workplace procedures, including the use of protective equipment 
Final trim and finishing are completed to specifications 
Work is checked against required quality standards 
Any non-conformity with the required quality standard is rectified 
Joints are identified and type of joint to be used is selected and adapted/designed as necessary 
Tools, adhesives and fasteners are selected to match the joint type 
Cutting and joining lines are marked out to suit joint type 
Measurements and calculations are checked for accuracy to ensure quality outcomes 
Material features are identified and optimal usage criteria are observed 
Material is cut to specification, inspected and prepared for joining 
Material is joined in accordance with the job specifications 
Fasteners and adhesives are used to make joints firm where required 
Finished joint is checked against quality requirements 
Components and materials, including adhesives, trims and accessories, and tools, are laid out in accordance with the assembly plan 
Components are checked against specification prior to assembly and out of specification items are rejected 
Sub-assemblies are assembled using appropriate tools, jigs and fixtures and checked against specification for accuracy, fit, twist and distortion 
Sub-assembly quality is checked against plans at identified checkpoints 
Components, sub-assemblies and materials, including adhesives, trims and accessories, and tools, are laid out in accordance with the assembly plan 
Components and sub-assemblies are checked against specification prior to assembly and out of specification items are rejected 
Components are assembled, fitted using appropriate tools, jigs and fixtures, and checked against specification for accuracy, fit, twist and distortion 
Hardware and decorative accessories are applied to specification 
Product is prepared for final finish, including the removal of bruises, scratches, dents and marks 
Product quality is checked against plans at identified checkpoints 
Using samples of the type of material surface and specified finish, various finishing options are evaluated and the preferred option is selected 
Sample of material is tested with selected finishing technique to ensure appropriateness 
Furniture surface is prepared in accordance with the finishing specification 
Imperfections, pores or nail or screw holes on the surface are rectified 
Finishing processes and materials are applied in accordance with the agreed specifications 
Surface is polished or buffed depending on the shine required 
Work is checked against required quality standards 
Any non-conformity with the required quality standards is rectified 
Unused materials are stored or recycled as required 
Tools and equipment are cleaned and stored appropriately 
Faulty or defective equipment is tagged and reported in accordance with workplace practices 
Work area is cleaned and rubbish disposed of appropriately 
Workplace documentation and/or reports are completed, including time log for operations for costing and business improvement activities 

Forms

Assessment Cover Sheet

MSFFDT5004 - Construct custom furniture using advanced techniques
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MSFFDT5004 - Construct custom furniture using advanced techniques

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: