Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MSFFM3011 Mapping and Delivery Guide
Measure and draw site layout for manufactured furniture products

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency MSFFM3011 - Measure and draw site layout for manufactured furniture products
Description
Employability Skills
Learning Outcomes and Application This unit of competency covers measuring and recording site layout details to provide an accurate basis for both manufacture and installation of furniture products.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must:

hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors

have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification

be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.

Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.

Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.

Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.

Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.

Access is required to information on the site and products for measurement and calculation, suitable work area appropriate to the activity, suitable site plans/drawings and/or specifications, and measuring, calculating and recording devices.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Obtain measurements
  • The purpose of obtaining measurements is clarified and confirmed
  • The most appropriate method of obtaining the measurement is selected and applied
  • Accurate measurements are obtained, confirmed and recorded
  • Calculations required for the measurement or validation are selected and correctly applied
  • Quality assurance requirements, standards and tolerances associated with enterprise operations are recognised and adhered to
       
Element: Draw site layout
  • Intended use of the site is clarified and confirmed
  • A site plan is prepared showing all features and measurements
  • A site elevation is completed showing all features and measurements
  • Unique and non-complying features which may impact on manufacture and/or installation are highlighted and referred to the appropriate party
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Obtain measurements

1.1

The purpose of obtaining measurements is clarified and confirmed

1.2

The most appropriate method of obtaining the measurement is selected and applied

1.3

Accurate measurements are obtained, confirmed and recorded

1.4

Calculations required for the measurement or validation are selected and correctly applied

1.5

Quality assurance requirements, standards and tolerances associated with enterprise operations are recognised and adhered to

2

Draw site layout

2.1

Intended use of the site is clarified and confirmed

2.2

A site plan is prepared showing all features and measurements

2.3

A site elevation is completed showing all features and measurements

2.4

Unique and non-complying features which may impact on manufacture and/or installation are highlighted and referred to the appropriate party

Identify the factors relevant to the measurements and drawings

Communicate effectively to enable accurate calculations, measurements and drawings

Accurately measure and record particulars for required sector sites and materials

Draw accurate, scaled plans and elevations relevant to the site using manual or computer-aided methods

Identify and communicate on measurements and dimensions which may impact on manufacture and/or installation

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Minimise wastage of resources, including materials, time and money

Furniture design and planning criteria

Drawing techniques, technologies and processes

Furniture installation methods, criteria and techniques

Measurement techniques and equipment/tools

Theory and practice of calculations (addition, subtraction, multiplication and division)

Conventional signs and markings for plans and drawings

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Obtain measurements

1.1

The purpose of obtaining measurements is clarified and confirmed

1.2

The most appropriate method of obtaining the measurement is selected and applied

1.3

Accurate measurements are obtained, confirmed and recorded

1.4

Calculations required for the measurement or validation are selected and correctly applied

1.5

Quality assurance requirements, standards and tolerances associated with enterprise operations are recognised and adhered to

2

Draw site layout

2.1

Intended use of the site is clarified and confirmed

2.2

A site plan is prepared showing all features and measurements

2.3

A site elevation is completed showing all features and measurements

2.4

Unique and non-complying features which may impact on manufacture and/or installation are highlighted and referred to the appropriate party

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit scope includes:

measurement and drawing of site layout related to the manufacture and installation of furniture, cabinets, glass, soft furnishings, upholstery, picture framing and floor covering products

Drawing include:

manual or computer-aided

Measurements:

are to be in metric scale, cover all dimensions of the site and furnishings and involve the use of:

rulers

tape measures

squares

service detectors

laser or equivalent technology

Critical dimensions that may impact on manufacture and installation include:

the square of the structure

angles of floor to walls

walls to ceiling

vertical walls

horizontal floor and ceiling

service locations and critical structural criteria

Calculations include:

area

perimeter

volume

mass

scales and ratios (ingredients/elements and triangulation) and require the application of addition

subtraction

multiplication and division processes

calculations are to be performed both manually and with the aid of a calculator

Unit context includes:

work health and safety (WHS) requirements, including legislation, building codes, material safety management systems, hazardous substances and dangerous goods codes and local safe operating procedures

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

Personal protective equipment includes:

that prescribed under legislation, regulations and enterprise policies and practices

Information and procedures include:

workplace procedures relating to the use of tools and equipment

work instructions, including job sheets, cutting lists, plans, drawings and designs

workplace procedures relating to reporting and communication

manufacturer specifications and operational procedures

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
The purpose of obtaining measurements is clarified and confirmed 
The most appropriate method of obtaining the measurement is selected and applied 
Accurate measurements are obtained, confirmed and recorded 
Calculations required for the measurement or validation are selected and correctly applied 
Quality assurance requirements, standards and tolerances associated with enterprise operations are recognised and adhered to 
Intended use of the site is clarified and confirmed 
A site plan is prepared showing all features and measurements 
A site elevation is completed showing all features and measurements 
Unique and non-complying features which may impact on manufacture and/or installation are highlighted and referred to the appropriate party 

Forms

Assessment Cover Sheet

MSFFM3011 - Measure and draw site layout for manufactured furniture products
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MSFFM3011 - Measure and draw site layout for manufactured furniture products

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: