Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MSFSF3001 Mapping and Delivery Guide
Operate drop cutting machines

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency MSFSF3001 - Operate drop cutting machines
Description
Employability Skills
Learning Outcomes and Application This unit of competency covers using drop cutting machines to machine synthetic or natural fabrics used for curtains, internal or external blinds, awnings and shade wings.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must:

hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors

have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification

be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.

Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.

Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.

Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.

Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.

Access is required to drop cutting machines, equipment operating procedures and fabric for cutting.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Identify drop cutting machine controls, adjustments and work procedures
  • Job requirements are identified from workplace approved operating procedures
  • Equipment components, adjustment points and controls are identified
  • Operating procedures are checked to identify approved operating range and adjustments
  • Equipment operations and production procedures are identified
  • The process for obtaining materials and moving products to the next process is identified
       
Element: Plan and prepare for work
  • Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition
  • Inspection procedure for material quality and equipment condition is identified
  • Work sequence is planned to suit job
  • Work health and safety (WHS) requirements, including ergonomic criteria and personal protection needs, are observed throughout the work
  • Equipment emergency stops and guards are identified
  • Machine checking procedures are identified
  • Any required supplementary equipment is identified for routine lubrication and adjustments of the equipment
       
Element: Set and operate drop cutting machine
  • Fabric length and angle of cut are set on the drop cutting machine following work order
  • Fabric is fixed to the machine using appropriate hooks or other fasteners
  • Fabric is checked for flaws prior to cutting
  • Fabric use minimises waste materials
  • Cutting operations provide the required product quality standards, work outputs and minimisation of waste
  • Problems are identified and reported following workplace procedures
  • Cut lengths are checked for required quality and moved to the next process
  • Waste and scrap are dealt with following workplace procedures
  • Equipment and work area clean-up are completed following workplace procedures
       
Element: Confirm quality requirements are met
  • Process is monitored and conditions which may affect quality standards are reported
  • Observed requirements for repairs or maintenance are identified and reported to appropriate personnel
  • Authorised changes to settings or operating procedures are implemented
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Identify drop cutting machine controls, adjustments and work procedures

1.1

Job requirements are identified from workplace approved operating procedures

1.2

Equipment components, adjustment points and controls are identified

1.3

Operating procedures are checked to identify approved operating range and adjustments

1.4

Equipment operations and production procedures are identified

1.5

The process for obtaining materials and moving products to the next process is identified

2

Plan and prepare for work

2.1

Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition

2.2

Inspection procedure for material quality and equipment condition is identified

2.3

Work sequence is planned to suit job

2.4

Work health and safety (WHS) requirements, including ergonomic criteria and personal protection needs, are observed throughout the work

2.5

Equipment emergency stops and guards are identified

2.6

Machine checking procedures are identified

2.7

Any required supplementary equipment is identified for routine lubrication and adjustments of the equipment

3

Set and operate drop cutting machine

3.1

Fabric length and angle of cut are set on the drop cutting machine following work order

3.2

Fabric is fixed to the machine using appropriate hooks or other fasteners

3.3

Fabric is checked for flaws prior to cutting

3.4

Fabric use minimises waste materials

3.5

Cutting operations provide the required product quality standards, work outputs and minimisation of waste

3.6

Problems are identified and reported following workplace procedures

3.7

Cut lengths are checked for required quality and moved to the next process

3.8

Waste and scrap are dealt with following workplace procedures

3.9

Equipment and work area clean-up are completed following workplace procedures

4

Confirm quality requirements are met

4.1

Process is monitored and conditions which may affect quality standards are reported

4.2

Observed requirements for repairs or maintenance are identified and reported to appropriate personnel

4.3

Authorised changes to settings or operating procedures are implemented

Interpret work order and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Identify materials used in the work process

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

maintain required production output and product quality

Identify and operate machine controls and guards and set depth and angle of cut to specification

Operate drop cutting machine to cut at least five (5) different types of material or fabric

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Avoid backtracking, work flow interruptions or wastage

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

Types, characteristics, uses and limitations of drop cutting machines

Characteristics of materials used and products produced

Identification of equipment adjustment points, processes and procedures

Procedure for reporting faulty products or interruptions to work flow

Work flow requirements for process

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Identify drop cutting machine controls, adjustments and work procedures

1.1

Job requirements are identified from workplace approved operating procedures

1.2

Equipment components, adjustment points and controls are identified

1.3

Operating procedures are checked to identify approved operating range and adjustments

1.4

Equipment operations and production procedures are identified

1.5

The process for obtaining materials and moving products to the next process is identified

2

Plan and prepare for work

2.1

Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition

2.2

Inspection procedure for material quality and equipment condition is identified

2.3

Work sequence is planned to suit job

2.4

Work health and safety (WHS) requirements, including ergonomic criteria and personal protection needs, are observed throughout the work

2.5

Equipment emergency stops and guards are identified

2.6

Machine checking procedures are identified

2.7

Any required supplementary equipment is identified for routine lubrication and adjustments of the equipment

3

Set and operate drop cutting machine

3.1

Fabric length and angle of cut are set on the drop cutting machine following work order

3.2

Fabric is fixed to the machine using appropriate hooks or other fasteners

3.3

Fabric is checked for flaws prior to cutting

3.4

Fabric use minimises waste materials

3.5

Cutting operations provide the required product quality standards, work outputs and minimisation of waste

3.6

Problems are identified and reported following workplace procedures

3.7

Cut lengths are checked for required quality and moved to the next process

3.8

Waste and scrap are dealt with following workplace procedures

3.9

Equipment and work area clean-up are completed following workplace procedures

4

Confirm quality requirements are met

4.1

Process is monitored and conditions which may affect quality standards are reported

4.2

Observed requirements for repairs or maintenance are identified and reported to appropriate personnel

4.3

Authorised changes to settings or operating procedures are implemented

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

work requires individuals to demonstrate some discretion, judgement and problem solving

Machine checking procedures include:

materials inputs and outputs

cutting blade condition

attachments and ancillary equipment

quality requirements for the process stage

Personal protective equipment includes:

that prescribed under legislation, regulations and enterprise policies and practices

Information and procedures include:

workplace procedures relating to the use of tools and equipment

work instructions, including job sheets, cutting lists, plans, drawings and designs

workplace procedures relating to reporting and communication

manufacturer specifications and operational procedures

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Job requirements are identified from workplace approved operating procedures 
Equipment components, adjustment points and controls are identified 
Operating procedures are checked to identify approved operating range and adjustments 
Equipment operations and production procedures are identified 
The process for obtaining materials and moving products to the next process is identified 
Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition 
Inspection procedure for material quality and equipment condition is identified 
Work sequence is planned to suit job 
Work health and safety (WHS) requirements, including ergonomic criteria and personal protection needs, are observed throughout the work 
Equipment emergency stops and guards are identified 
Machine checking procedures are identified 
Any required supplementary equipment is identified for routine lubrication and adjustments of the equipment 
Fabric length and angle of cut are set on the drop cutting machine following work order 
Fabric is fixed to the machine using appropriate hooks or other fasteners 
Fabric is checked for flaws prior to cutting 
Fabric use minimises waste materials 
Cutting operations provide the required product quality standards, work outputs and minimisation of waste 
Problems are identified and reported following workplace procedures 
Cut lengths are checked for required quality and moved to the next process 
Waste and scrap are dealt with following workplace procedures 
Equipment and work area clean-up are completed following workplace procedures 
Process is monitored and conditions which may affect quality standards are reported 
Observed requirements for repairs or maintenance are identified and reported to appropriate personnel 
Authorised changes to settings or operating procedures are implemented 

Forms

Assessment Cover Sheet

MSFSF3001 - Operate drop cutting machines
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MSFSF3001 - Operate drop cutting machines

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: