Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MSFSS2001 Mapping and Delivery Guide
Rectify faults in product

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency MSFSS2001 - Rectify faults in product
Description
Employability Skills
Learning Outcomes and Application This unit of competency covers identifying and rectifying faults in security screen and grille materials and products.Licensing, legislative or certification requirements may apply to this unit and relevant state/territory and local government agencies should be consulted to determine any necessary certification or licensing for undertaking security screens and grilles work. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must:

hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors

have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification

be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.

Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.

Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.

Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.

Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.

Access is required to materials, equipment and specifications relevant to rectifying faults in the manufacturing and/or installing security screens and grilles.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare
  • Applicable work health and safety (WHS), legislative and organisational requirements relevant to rectifying faults in the manufacturing and installation of security screens and grilles are verified and complied with
  • Tools and equipment are selected to carry out tasks, are consistent with the requirements of the job, checked for serviceability, and any faults are rectified or reported prior to commencement
  • Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use
  • Workplace environment considerations are identified and measures to reduce noise, dust and obstacles are applied
       
Element: Assess the fault to identify rectification issues
  • Faults are identified and inspected to confirm the extent and nature of the fault
  • Faults are assessed to determine whether it is a defect in workmanship, process or material
  • Verbal and/or written report on the nature of the defect and probable cause is provided
  • Faults found are assessed for remedial solutions
  • Solution to repair the fault is selected and planned
       
Element: Rectify faults
  • Damage or defective area is prepared for repair
  • Specialist instruments and repair tools are applied to rectify the fault
  • Damage or defective area is finished to specification
  • Documentation is completed outlining the nature of the fault, work conducted and outcome, in accordance with enterprise requirements
  • Rectified parts are processed for inspection and returned to the production/installation sequence
       
Element: Clean up work area
  • Work area is cleared and materials disposed of
  • Tools and equipment are cleaned
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Plan and prepare

1.1

Applicable work health and safety (WHS), legislative and organisational requirements relevant to rectifying faults in the manufacturing and installation of security screens and grilles are verified and complied with

1.2

Tools and equipment are selected to carry out tasks, are consistent with the requirements of the job, checked for serviceability, and any faults are rectified or reported prior to commencement

1.3

Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use

1.4

Workplace environment considerations are identified and measures to reduce noise, dust and obstacles are applied

2

Assess the fault to identify rectification issues

2.1

Faults are identified and inspected to confirm the extent and nature of the fault

2.2

Faults are assessed to determine whether it is a defect in workmanship, process or material

2.3

Verbal and/or written report on the nature of the defect and probable cause is provided

2.4

Faults found are assessed for remedial solutions

2.5

Solution to repair the fault is selected and planned

3

Rectify faults

3.1

Damage or defective area is prepared for repair

3.2

Specialist instruments and repair tools are applied to rectify the fault

3.3

Damage or defective area is finished to specification

3.4

Documentation is completed outlining the nature of the fault, work conducted and outcome, in accordance with enterprise requirements

3.5

Rectified parts are processed for inspection and returned to the production/installation sequence

4

Clean up work area

4.1

Work area is cleared and materials disposed of

4.2

Tools and equipment are cleaned

Interpret work order and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Identify materials used in the work process

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

maintain required production output and product quality

Inspect, assess and rectify at least five (5) separate and different faults to specifications and enterprise inspections requirements

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Avoid backtracking, work flow interruptions or wastage

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

State or territory WHS legislation, regulations, standards and codes of practice relevant to the full range of processes for manufacturing and installing security screens and grilles

Organisational and site standards, requirements, policies and procedures for manufacturing and installing security screens and grilles

Environmental protection requirements relating to the disposal of waste material

Established communication channels and protocols

Relevant problem identification and resolution

Types of tools and equipment and procedures for their safe use, operation and maintenance

Characteristics of steel and aluminium products and defects

Procedures for the recording, reporting and maintenance of workplace records and information

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Plan and prepare

1.1

Applicable work health and safety (WHS), legislative and organisational requirements relevant to rectifying faults in the manufacturing and installation of security screens and grilles are verified and complied with

1.2

Tools and equipment are selected to carry out tasks, are consistent with the requirements of the job, checked for serviceability, and any faults are rectified or reported prior to commencement

1.3

Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use

1.4

Workplace environment considerations are identified and measures to reduce noise, dust and obstacles are applied

2

Assess the fault to identify rectification issues

2.1

Faults are identified and inspected to confirm the extent and nature of the fault

2.2

Faults are assessed to determine whether it is a defect in workmanship, process or material

2.3

Verbal and/or written report on the nature of the defect and probable cause is provided

2.4

Faults found are assessed for remedial solutions

2.5

Solution to repair the fault is selected and planned

3

Rectify faults

3.1

Damage or defective area is prepared for repair

3.2

Specialist instruments and repair tools are applied to rectify the fault

3.3

Damage or defective area is finished to specification

3.4

Documentation is completed outlining the nature of the fault, work conducted and outcome, in accordance with enterprise requirements

3.5

Rectified parts are processed for inspection and returned to the production/installation sequence

4

Clean up work area

4.1

Work area is cleared and materials disposed of

4.2

Tools and equipment are cleaned

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

work requires individuals to demonstrate some discretion, judgement and problem solving

Faults include:

defects in workmanship or materials that affect the look or functional quality of the finished security screen or grille product

Personal protective equipment includes:

that prescribed under legislation, regulation and enterprise policies and practices

Information and procedures include:

workplace procedures relating to the use of tools and equipment and personal protective equipment

work instructions, including job sheets, cutting lists, plans, drawings and designs

workplace procedures relating to reporting and communication

manufacturer specifications and operational procedures

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Applicable work health and safety (WHS), legislative and organisational requirements relevant to rectifying faults in the manufacturing and installation of security screens and grilles are verified and complied with 
Tools and equipment are selected to carry out tasks, are consistent with the requirements of the job, checked for serviceability, and any faults are rectified or reported prior to commencement 
Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use 
Workplace environment considerations are identified and measures to reduce noise, dust and obstacles are applied 
Faults are identified and inspected to confirm the extent and nature of the fault 
Faults are assessed to determine whether it is a defect in workmanship, process or material 
Verbal and/or written report on the nature of the defect and probable cause is provided 
Faults found are assessed for remedial solutions 
Solution to repair the fault is selected and planned 
Damage or defective area is prepared for repair 
Specialist instruments and repair tools are applied to rectify the fault 
Damage or defective area is finished to specification 
Documentation is completed outlining the nature of the fault, work conducted and outcome, in accordance with enterprise requirements 
Rectified parts are processed for inspection and returned to the production/installation sequence 
Work area is cleared and materials disposed of 
Tools and equipment are cleaned 

Forms

Assessment Cover Sheet

MSFSS2001 - Rectify faults in product
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MSFSS2001 - Rectify faults in product

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: