List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice	Yes	No	Comments/feedback
Select the appropriate calibration procedure for the test in accordance with workplace procedures
Identify hazards and use appropriate personal protective equipment (PPE), safety equipment and procedures
Confirm all measuring equipment complies with laboratory’s specification requirements and calibration procedure
Prepare reference standards and equipment for testing
Verify performance of reference standards and measuring equipment before use and quarantine out-of-calibration items in accordance with workplace procedures
Identify and minimise potential sources of measurement error
Perform individual tests without variance in accordance with the documented procedure to ensure repeatability of measurement
Confirm readings are the result of a valid measurement and record data (as-found or before adjustment)
Adjust device under test to bring readings within specification of calibration and record data (as-left or after adjustment)
Analyse test data for trends or inconsistencies that would significantly affect the accuracy or validity of test results
Repeat calibration if measurement has been compromised
Seek appropriate advice when interpretation of results is outside authorised scope of approval
Estimate and document uncertainty of measurement in accordance with workplace procedures
Document compliance or non-compliance with test requirements and/or specifications
Record the results of each test or calibration accurately, unambiguously and objectively
Ensure confidentiality of workplace information in accordance with workplace procedures
Prepare and issue a final report detailing testing carried out, traceability, statement of compliance and relevant information
Report any non-compliance and verify next course of action
Attach calibration labels, equipment stickers, quality control tags and tamper-resistant seals in accordance with workplace procedures
Store test equipment, measurement standards and results in accordance with workplace procedures

Assessment Cover Sheet

MSL904003 - Perform standard calibrations

Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MSL904003 - Perform standard calibrations

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: