List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice	Yes	No	Comments/feedback
Check the specification, drawing or client instructions
Calculate the angle of decline to be applied to the work piece
Determine the number of access and egress points to facilitate movement of liquids through the work piece
Identify and obtain components, reinforcing and/or other fitments as required by the specification
Establish and maintain a safe working environment which meets work health and safety (WHS) and enterprise requirements
Identify and prepare the appropriate liner or cover
Secure and level in accordance with procedures and work instructions
Check that the base is stabilised and correctly mounted as required to facilitate lifting or moving
Position components, reinforcing and/or other fitments as required by the specification
Prepare the concrete mix or obtain the material from the batch preparation unit
Ensure an adequate supply of material is available to meet production requirements
Free form the concrete inside the work piece to meet the rough dimensions required by the specification
Ensure that components, reinforcing and/or other fitments do not move during rough casting
Prepare a finishing mixture for application to the work piece
Apply the finishing coating, trowelling and sleeking the surface to specification
Check the work piece cures
Remove any separators, non-permanent inserts, plugs or blinds
Release work piece safely
Return mould segments for reuse or storage
Inspect work piece for defects
Make allowable repairs
Identify and mark work piece with appropriate brand or identification number
Apply appropriate surface coatings or coverings as required by the specification
Move work piece and store
Identify and rectify faults and equipment failure
Maintain records and log books of equipment operations
Identify non-routine problems and report to designated person
Identify benching hazards
Assess the risks arising from those hazards
Implement measures to control those risks

Assessment Cover Sheet

MSMPMC317 - Conduct benching operations

Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MSMPMC317 - Conduct benching operations

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: