Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

NWPNET027 Mapping and Delivery Guide
Monitor and control vacuum sewer systems

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency NWPNET027 - Monitor and control vacuum sewer systems
Description
Employability Skills
Learning Outcomes and Application This unit describes the skills required to monitor and maintain the operation of wastewater vacuum collection systems and to measure and report on the operation of the system. The ability to interpret technical documentation and identify and investigate operational problems is essential to performance.This unit applies to those working as field and operational staff with responsibility for ensuring that the vacuum sewer system performs effectively. The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to. Those undertaking this unit would work independently or in a team while performing routine tasks in range of familiar contexts, ensuring minimum damage to the environment.No licensing, legislative or certification requirements apply to unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Competency should be assessed in an actual workplace or in a simulated environment, with access to equipment and infrastructure appropriate to the outcome. Competency should be demonstrated over time to ensure the candidate is assessed across a variety of situations.

Assessors must satisfy the NVR/AQTF mandatory competency requirements for assessors.
Prerequisites/co-requisites
Competency Field Networks
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare for work
  • Determine work requirements for monitoring vacuum sewer systems from plans, specifications and instructions.
  • Select and check equipment, documentation and tools to meet safety and work requirements of task and site.
  • Inform affected customers and stakeholders of the task to be carried out.
  • Obtain all permits necessary to complete the work.
  • Select, fit and use personal protective equipment.
  • Visit and investigate the site.
       
Element: Maintain vacuum pump station
  • Conducting housekeeping duties for the vacuum station building.
  • Check and monitor vacuum pumps, wastewater pump out and performance of odour control systems to ensure the specifications are met and make adjustments.
  • Complete pump station workplace records for all pumps and instruments.
       
Element: Investigate faults in vacuum sewer system
  • Identify and record links between operational problems and maintenance activities.
  • Investigate and control the operational status of system components with reference to manufacturer and supplier specifications.
  • Ensure system is returned to operational mode.
       
Element: Compile process records
  • Compile reports from system data.
  • Record the condition of equipment and report faults and anticipated problems.
       
Element: Plan and prepare for work
  • Determine work requirements for monitoring vacuum sewer systems from plans, specifications and instructions.
  • Select and check equipment, documentation and tools to meet safety and work requirements of task and site.
  • Inform affected customers and stakeholders of the task to be carried out.
  • Obtain all permits necessary to complete the work.
  • Select, fit and use personal protective equipment.
  • Visit and investigate the site.
       
Element: Maintain vacuum pump station
  • Conducting housekeeping duties for the vacuum station building.
  • Check and monitor vacuum pumps, wastewater pump out and performance of odour control systems to ensure the specifications are met and make adjustments.
  • Complete pump station workplace records for all pumps and instruments.
       
Element: Investigate faults in vacuum sewer system
  • Identify and record links between operational problems and maintenance activities.
  • Investigate and control the operational status of system components with reference to manufacturer and supplier specifications.
  • Ensure system is returned to operational mode.
       
Element: Compile process records
  • Compile reports from system data.
  • Record the condition of equipment and report faults and anticipated problems.
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section.

1. Plan and prepare for work

1.1 Determine work requirements for monitoring vacuum sewer systems from plans, specifications and instructions.

1.2 Select and check equipment, documentation and tools to meet safety and work requirements of task and site.

1.3 Inform affected customers and stakeholders of the task to be carried out.

1.4 Obtain all permits necessary to complete the work.

1.5 Select, fit and use personal protective equipment.

1.6 Visit and investigate the site.

2. Maintain vacuum pump station

2.1 Conducting housekeeping duties for the vacuum station building.

2.2 Check and monitor vacuum pumps, wastewater pump out and performance of odour control systems to ensure the specifications are met and make adjustments.

2.3 Complete pump station workplace records for all pumps and instruments.

3. Investigate faults in vacuum sewer system

3.1 Identify and record links between operational problems and maintenance activities.

3.2 Investigate and control the operational status of system components with reference to manufacturer and supplier specifications.

3.3 Ensure system is returned to operational mode.

4. Compile process records

4.1 Compile reports from system data.

4.2 Record the condition of equipment and report faults and anticipated problems.

Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the candidate must demonstrate evidence of performance of the following on at least one occasion.

responding to and correcting operational problems

producing reports and logs

using safety equipment and personal protective equipment

identifying and investigating operational problems

collecting and basic analysing of data

interpreting plans, charts, service search diagrams and instructions and specifications

interpreting policies, standard operating procedures and standards

communicating with colleagues and customers

operating control systems

identifying control system faults

Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the depth of knowledge demonstrated must be appropriate to the job context of the candidate.

coordination and control of processes

collection system layout

system processes

environmental aspects of vacuum systems

disinfection and chemical use during maintenance operations

safety procedures

lock out procedures for mechanical and electrical installations

policies, standard operating procedures and legislation

relevant utilities and service bodies

communication systems

risk factors and potential hazards involved with wastewater vacuum systems

equipment operation, capacity and limitations

effects of weather and conditions on operation of wastewater vacuum systems

pipes and fittings

pumping and valving systems

control systems

vacuum station odour control methods

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section.

1. Plan and prepare for work

1.1 Determine work requirements for monitoring vacuum sewer systems from plans, specifications and instructions.

1.2 Select and check equipment, documentation and tools to meet safety and work requirements of task and site.

1.3 Inform affected customers and stakeholders of the task to be carried out.

1.4 Obtain all permits necessary to complete the work.

1.5 Select, fit and use personal protective equipment.

1.6 Visit and investigate the site.

2. Maintain vacuum pump station

2.1 Conducting housekeeping duties for the vacuum station building.

2.2 Check and monitor vacuum pumps, wastewater pump out and performance of odour control systems to ensure the specifications are met and make adjustments.

2.3 Complete pump station workplace records for all pumps and instruments.

3. Investigate faults in vacuum sewer system

3.1 Identify and record links between operational problems and maintenance activities.

3.2 Investigate and control the operational status of system components with reference to manufacturer and supplier specifications.

3.3 Ensure system is returned to operational mode.

4. Compile process records

4.1 Compile reports from system data.

4.2 Record the condition of equipment and report faults and anticipated problems.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Determine work requirements for monitoring vacuum sewer systems from plans, specifications and instructions. 
Select and check equipment, documentation and tools to meet safety and work requirements of task and site. 
Inform affected customers and stakeholders of the task to be carried out. 
Obtain all permits necessary to complete the work. 
Select, fit and use personal protective equipment. 
Visit and investigate the site. 
Conducting housekeeping duties for the vacuum station building. 
Check and monitor vacuum pumps, wastewater pump out and performance of odour control systems to ensure the specifications are met and make adjustments. 
Complete pump station workplace records for all pumps and instruments. 
Identify and record links between operational problems and maintenance activities. 
Investigate and control the operational status of system components with reference to manufacturer and supplier specifications. 
Ensure system is returned to operational mode. 
Compile reports from system data. 
Record the condition of equipment and report faults and anticipated problems. 
Determine work requirements for monitoring vacuum sewer systems from plans, specifications and instructions. 
Select and check equipment, documentation and tools to meet safety and work requirements of task and site. 
Inform affected customers and stakeholders of the task to be carried out. 
Obtain all permits necessary to complete the work. 
Select, fit and use personal protective equipment. 
Visit and investigate the site. 
Conducting housekeeping duties for the vacuum station building. 
Check and monitor vacuum pumps, wastewater pump out and performance of odour control systems to ensure the specifications are met and make adjustments. 
Complete pump station workplace records for all pumps and instruments. 
Identify and record links between operational problems and maintenance activities. 
Investigate and control the operational status of system components with reference to manufacturer and supplier specifications. 
Ensure system is returned to operational mode. 
Compile reports from system data. 
Record the condition of equipment and report faults and anticipated problems. 

Forms

Assessment Cover Sheet

NWPNET027 - Monitor and control vacuum sewer systems
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

NWPNET027 - Monitor and control vacuum sewer systems

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: