Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

PMBPROD237C Mapping and Delivery Guide
Splice cables

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency PMBPROD237C - Splice cables
Description This competency covers the operation of splicing of power and telecommunications cable. It applies to the cablemaking sector of the industry.This competency is typically performed by operators working either independently or as part of a work team.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application Application of this unitThis competency applies to operators who are required to undertake the splicing of cable in the production process. The key factors are the making of products to meet quality standards and workplace requirements.It includes:monitoring equipment operation and reporting process variations checking product for quality and conformity to specifications discarding non-conforming products identifying and taking action on routine process problems completing logs and reports.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites PrerequisitesThis unit has no prerequisites.
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Identify the materials and process.
  • Identify the process and materials to be used.
  • Check materials to be used in the splice are compatible with the cable.
  • Check allowances for joining overlaps in procedures.
  • Identify curing/cooling times for the materials and the process.
       
Element: Plan the joining process.
  • Plan the joining process using procedures.
  • Identify hazards associated with the job and take appropriate action.
  • Plan work sequence noting appropriate curing/cooling times, efficient work sequence and quality requirements.
       
Element: Set up equipment and materials for the process.
  • Assemble equipment and consumables.
  • Check equipment and site for safety.
  • Make adjustments and settings to suit materials and procedures.
  • Set up safety screens, engineering controls and personal protective equipment.
       
Element: Complete the joining process to procedures.
  • Splice the cable to procedures.
  • Check and test the process and the finished product.
  • Made adjustments as required to the process to maintain the quality of the finished product.
  • Complete workplace documentation and records as required.
       
Element: Respond to routine problems to procedures.
  • Recognise known faults that occur during the operation.
  • Identify and take action on causes of routine faults.
  • Log problems as required.
  • Identify non-routine process and quality problems and take appropriate action.
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, required skills and knowledge, the Range Statement and the Assessment Guidelines for this Training Package.

Overview of assessment

A holistic approach should be taken to the assessment.

Assessors must be satisfied that the person can consistently perform the unit as a whole, as defined by the Elements, Performance Criteria and skills and knowledge.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

It is essential that competence is demonstrated in the knowledge and skills defined in this unit. These may include the ability to:

select appropriate materials and joining process

plan and conduct joining process within workplace quality parameters

maintain effective work station within appropriate environmental and safety regulations and procedures

locate, interpret and apply relevant information

maintain workplace records

identify and safely handle products and materials

apply safety precautions appropriate to the task.

Consistent performance should be demonstrated. For example, look to see that:

cable production standards are met consistently

upstream and downstream communication is timely

effective operating procedures and work instructions are read and interpreted correctly

problems are identified and appropriate action is taken (ie the problem is fixed or reported)

all safety procedures are followed.

Assessment method and context

It is preferred that assessment takes place on an industrial extruder in a work-like environment.

Competence in this unit may be assessed:

on a processing plant, allowing for operation under all normal and a range of abnormal conditions

in a situation allowing for the generation of evidence of the ability to respond to problems

by using a suitable simulation and/or a range of case studies/scenarios

through a combination of these techniques.

In all cases it is expected that practical assessment will be combined with targeted questioning to assess the underpinning knowledge and theoretical assessment will be combined with appropriate practical/simulation or similar assessment. Assessors need to be aware of any cultural issues that may affect responses to questions.

Assessment processes and techniques must be culturally appropriate and appropriate to the oracy, language and literacy capacity of the assessee and the work being performed.

Specific resources for assessment

This section should be read in conjunction with the Range Statement for this unit of competency. Resources required include suitable access to an operating plant or equipment that allows for appropriate and realistic simulation. A bank of case studies/scenarios and questions will also be required to the extent that they form part of the assessment method. Questioning may take place either in the workplace, or in an adjacent, quiet facility such as an office or lunchroom. No other special resources are required.

Access must be provided to appropriate learning and/or assessment support when required. Where applicable, physical resources should include equipment modified for people with disabilities.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

This describes the essential skills and knowledge and their level required for this unit.

Application of knowledge of the materials, equipment and process sufficient to recognise out of specification products, process problems and materials faults.

Knowledge of organisation procedures and relevant regulatory requirements along with the ability to implement them within appropriate time constraints and work standards.

Application of the knowledge of managing risks using the hierarchy of controls applied to the cable splicing process. Application of approved hazard control, safety procedures and the use of PPE in relation to handling materials, equipment operation and clean-up.

Knowledge of and skills in the cable splicing operation and operation of equipment sufficient for consistent production of quality products including:

nature of the changes in materials arising from the chemical process in forming the joint

effects of the fumes, heat and other radiations arising from the chemical reactions in joining materials

effective and efficient use of materials equipment and consumables production workflow

focus of operation of work systems and equipment

identification and correct use of equipment, processes and procedures

planning own work, including predicting consequences and identifying improvements.

Consistent performance should be judged by their ability to:

establish effective working relationships with colleagues

modify activities to cater for variations in workplace contexts and environment

make joints conforming to quality specifications minimise waste

handle materials suitable for recycling appropriately

systematically complete work in accordance with safe operating

procedures to minimise the risk of injury to self or others or damage to goods, equipment or products in production.

Language, literacy and numeracy requirements

This unit requires the ability to read and interpret typical product specifications, job sheets, procedures, material labels and safety information as provided to operators.

Writing is required to the level of completing workplace forms.

Basic numeracy is required, e.g. to determine that two 25 kg bags are needed to make up a requirement for 50 kg.

The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts.

Where reference is made to industry codes of practice, and/or Australian/international standards, the latest version must be used.

Context

This competency applies to the cablemaking sector.

Procedures

All operations are performed in accordance with procedures.

Procedures include all relevant workplace procedures, work instructions, temporary instructions, manufacturer's instructions, specifications and relevant industry and government codes and standards.

Tools and equipment

This competency includes use of equipment and tools such as hand tools.

Hazards

Typical hazards include:

spills

chemical hazards

fumes/vapours

slip and fall

temperature

hazardous materials

manual handling hazards

equipment operations.

Problems

Respond to/rectify 'non-routine problems' means 'apply known solutions to a variety of predictable problems'. Typical process and product problems may include:

machine malfunction

variations in materials and/or contamination of materials.

Variables

Key variables to be monitored include:

cable type

insulation type

cable structure

joint specifications.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Identify the process and materials to be used. 
Check materials to be used in the splice are compatible with the cable. 
Check allowances for joining overlaps in procedures. 
Identify curing/cooling times for the materials and the process. 
Plan the joining process using procedures. 
Identify hazards associated with the job and take appropriate action. 
Plan work sequence noting appropriate curing/cooling times, efficient work sequence and quality requirements. 
Assemble equipment and consumables. 
Check equipment and site for safety. 
Make adjustments and settings to suit materials and procedures. 
Set up safety screens, engineering controls and personal protective equipment. 
Splice the cable to procedures. 
Check and test the process and the finished product. 
Made adjustments as required to the process to maintain the quality of the finished product. 
Complete workplace documentation and records as required. 
Recognise known faults that occur during the operation. 
Identify and take action on causes of routine faults. 
Log problems as required. 
Identify non-routine process and quality problems and take appropriate action. 

Forms

Assessment Cover Sheet

PMBPROD237C - Splice cables
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

PMBPROD237C - Splice cables

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: