Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

RIICCM201D Mapping and Delivery Guide
Carry out measurements and calculations

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency RIICCM201D - Carry out measurements and calculations
Description
Employability Skills
Learning Outcomes and Application This unit describes a participant’s skills and knowledge required to carry out measurements and calculations in Civil Construction. This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,

this unit is best assessed in the context of this sector’s work environment;

where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of this sector’s workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills; and,

this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,

assessment may be conducted in conjunction with the assessment of other Units of Competency; and,

assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,

assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,

where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,

assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:

Industry sector

AQF** Level

Required assessor or Industry subject matter expert experience

Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction

1

1 Year

2

2 Years

Drilling, Coal Mining and Extractive (Quarrying)

3-6

3 Years

Metalliferous Mining and Civil Construction

3-6

5 Years

Other sectors

Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation.

*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.

**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level

Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare for measurements and calculations
  • Access, interpret and apply measurements and calculations documentation and ensure the work activity is compliant
  • Obtain, read, interpret, clarify and confirm work requirements
  • Select, and check for faults, equipment/tools for work activities
       
Element: Perform measurements
  • Select and apply method of obtaining the measurement
  • Obtain measurements using appropriate tool, and ensure required accuracy
  • Confirm and record measurements
       
Element: Perform calculations
  • Select appropriate calculation method
  • Calculate values for the project using the appropriate factors
  • Confirm and record results
       
Element: Estimate quantities
  • Select appropriate formulas for calculating quantities
  • Make calculations for determining quantities
  • Estimate quantities from the calculations taken
  • Confirm and record quantities for the project within project tolerances
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

1. Plan and prepare for measurements and calculations

1.1 Access, interpret and apply measurements and calculations documentation and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements

1.3 Select, and check for faults, equipment/tools for work activities

2. Perform measurements

2.1 Select and apply method of obtaining the measurement

2.2 Obtain measurements using appropriate tool, and ensure required accuracy

2.3 Confirm and record measurements

3. Perform calculations

3.1 Select appropriate calculation method

3.2 Calculate values for the project using the appropriate factors

3.3 Confirm and record results

4. Estimate quantities

4.1 Select appropriate formulas for calculating quantities

4.2 Make calculations for determining quantities

4.3 Estimate quantities from the calculations taken

4.4 Confirm and record quantities for the project within project tolerances

Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:

locates and applies applicable documentation, policies and procedures

implements the requirements, procedures and techniques for the safe, effective and efficient carrying out of measurements and calculations including:

calculating each of the following using a realistic civil construction project:

quantity

length

perimeter

circumference

area

volume

number

ratio

percentage

works effectively with others to undertake and complete measurements and calculations that meet all of the required outcomes, including:

using a range of communications techniques and equipment

complying with written and verbal reporting requirements and procedures

demonstrates completion of measurements and calculations that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:

completing measurements, calculations and estimations of quantities for projects of varying complexity

measuring using a rule or tape measure for a variety of tasks within 98% accuracy

The candidate must demonstrate knowledge of the following when carrying out measurements and calculations:

accessing, interpreting and applying the organisation and site requirements and procedures for:

using operational tools and equipment safely and effectively

achieving project quality and accuracy

using JSA’s/JSEA/Safe work methods

conversion of different metric values e.g. metres to millimetres

understanding tolerances

completing measuring, calculating, geometry and determination of quantities

caring for measuring equipment

working with civil construction terminology


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

1. Plan and prepare for measurements and calculations

1.1 Access, interpret and apply measurements and calculations documentation and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements

1.3 Select, and check for faults, equipment/tools for work activities

2. Perform measurements

2.1 Select and apply method of obtaining the measurement

2.2 Obtain measurements using appropriate tool, and ensure required accuracy

2.3 Confirm and record measurements

3. Perform calculations

3.1 Select appropriate calculation method

3.2 Calculate values for the project using the appropriate factors

3.3 Confirm and record results

4. Estimate quantities

4.1 Select appropriate formulas for calculating quantities

4.2 Make calculations for determining quantities

4.3 Estimate quantities from the calculations taken

4.4 Confirm and record quantities for the project within project tolerances

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Access, interpret and apply measurements and calculations documentation and ensure the work activity is compliant 
Obtain, read, interpret, clarify and confirm work requirements 
Select, and check for faults, equipment/tools for work activities 
Select and apply method of obtaining the measurement 
Obtain measurements using appropriate tool, and ensure required accuracy 
Confirm and record measurements 
Select appropriate calculation method 
Calculate values for the project using the appropriate factors 
Confirm and record results 
Select appropriate formulas for calculating quantities 
Make calculations for determining quantities 
Estimate quantities from the calculations taken 
Confirm and record quantities for the project within project tolerances 

Forms

Assessment Cover Sheet

RIICCM201D - Carry out measurements and calculations
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

RIICCM201D - Carry out measurements and calculations

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: