Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

RIICRM302D Mapping and Delivery Guide
Conduct long line road marking operations

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency RIICRM302D - Conduct long line road marking operations
Description
Employability Skills
Learning Outcomes and Application This unit describes a participant’s skills and knowledge required to conduct long line road marking operations in Civil Construction.This unit is appropriate for those working in operational roles. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,

this unit must be assessed in the context of this sector’s work environment; and,

this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,

assessment may be conducted in conjunction with the assessment of other Units of Competency; and,

assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,

assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,

where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,

assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:

Industry sector

AQF** Level

Required assessor or Industry subject matter expert experience

Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction

1

1 Year

2

2 Years

Drilling, Coal Mining and Extractive (Quarrying)

3-6

3 Years

Metalliferous Mining and Civil Construction

3-6

5 Years

Other sectors

Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation.

*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.

**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level

Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare to conduct long line road marking operations
  • Access, interpret and apply long line road marking operations documentation and ensure the work activity is compliant
  • Obtain, interpret, clarify and confirm work instructions before proceeding
  • Identify and implement traffic management signage requirements
  • Select and check for faults plant, tools and equipment to carry out tasks
  • Identify, address and report hazards, risks and environmental issues
  • Select and wear correct personal protective equipment appropriate for work activities
  • Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
       
Element: Conduct pre-operational checks
  • Check/inflate tyres
  • Carry out pre-start, start-up, park up, shutdown and secure equipment procedures
  • Check road marking plant controls and functions, including brakes and manoeuvrability for serviceability, and report faults
       
Element: Operate long line road marking plant
  • Drive and operate equipment
  • Manage engine power to ensure efficiency of plant movements and to minimise damage to the engine and gears
  • Position vehicle correctly prior to marking run to enable uninterrupted flow of road marking material
  • Maintain control and alignment on marking run
  • Apply road marking material to the surface providing an even coverage
       
Element: Carry out operator maintenance
  • Prepare machine for maintenance
  • Conduct inspection and fault finding
  • Carry out scheduled maintenance tasks
  • Process written maintenance records
       
Element: Clean up
  • Clear work area and dispose of or recycle materials
  • Return surplus fuel and lubricants to storage
  • Clean, check, maintain and store plant, tools and equipment
  • Carry out housekeeping activities
       
Element: Plan and prepare to conduct long line road marking operations
  • Access, interpret and apply long line road marking operations documentation and ensure the work activity is compliant
  • Obtain, interpret, clarify and confirm work instructions before proceeding
  • Identify and implement traffic management signage requirements
  • Select and check for faults plant, tools and equipment to carry out tasks
  • Identify, address and report hazards, risks and environmental issues
  • Select and wear correct personal protective equipment appropriate for work activities
  • Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
       
Element: Conduct pre-operational checks
  • Check/inflate tyres
  • Carry out pre-start, start-up, park up, shutdown and secure equipment procedures
  • Check road marking plant controls and functions, including brakes and manoeuvrability for serviceability, and report faults
       
Element: Operate long line road marking plant
  • Drive and operate equipment
  • Manage engine power to ensure efficiency of plant movements and to minimise damage to the engine and gears
  • Position vehicle correctly prior to marking run to enable uninterrupted flow of road marking material
  • Maintain control and alignment on marking run
  • Apply road marking material to the surface providing an even coverage
       
Element: Carry out operator maintenance
  • Prepare machine for maintenance
  • Conduct inspection and fault finding
  • Carry out scheduled maintenance tasks
  • Process written maintenance records
  • Clear work area and dispose of or recycle materials
  • Return surplus fuel and lubricants to storage
  • Clean, check, maintain and store plant, tools and equipment
  • Carry out housekeeping activities
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

1. Plan and prepare to conduct long line road marking operations

1.1 Access, interpret and apply long line road marking operations documentation and ensure the work activity is compliant

1.2 Obtain, interpret, clarify and confirm work instructions before proceeding

1.3 Identify and implement traffic management signage requirements

1.4 Select and check for faults plant, tools and equipment to carry out tasks

1.5 Identify, address and report hazards, risks and environmental issues

1.6 Select and wear correct personal protective equipment appropriate for work activities

1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency

2. Conduct pre-operational checks

2.1 Check/inflate tyres

2.2 Carry out pre-start, start-up, park up, shutdown and secure equipment procedures

2.3 Check road marking plant controls and functions, including brakes and manoeuvrability for serviceability, and report faults

3. Operate long line road marking plant

3.1 Drive and operate equipment

3.2 Manage engine power to ensure efficiency of plant movements and to minimise damage to the engine and gears

3.3 Position vehicle correctly prior to marking run to enable uninterrupted flow of road marking material

3.4 Maintain control and alignment on marking run

3.5 Apply road marking material to the surface providing an even coverage

4. Carry out operator maintenance

4.1 Prepare machine for maintenance

4.2 Conduct inspection and fault finding

4.3 Carry out scheduled maintenance tasks

4.4 Process written maintenance records

5. Clean up

5.1 Clear work area and dispose of or recycle materials

5.2 Return surplus fuel and lubricants to storage

5.3 Clean, check, maintain and store plant, tools and equipment

5.4 Carry out housekeeping activities

Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:

locates and applies applicable legislation, documentation, policies and procedures

works effectively with others to undertake and complete the long line road marking operations that meets all of the required outcomes including:

communicating clearly and concisely with others to receive and clarify work instructions

using a range of communication techniques and systems such as signage to advise others of work activity and exclusion zone

demonstrates completion of conducting long line road marking road marking operations that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:

selecting and inspecting for faults in plant, tools and equipment

identifying, reporting and recording hazards, risks and environmental issues

conducting pre-start, start-up, park up, shutdown and secure equipment maintenance procedures

placement of new lines for a minimum of five (5) kilometres of each of the following, with a long line road marking machine to the specified tolerance:

centre line (to include separation line, barrier line one direction and barrier line both directions)

edge lines

re-marking over existing lines for a minimum of five (5) kilometres of each of the following, with a long line road marking machine to the specified tolerance:

centre line (to include separation line, barrier line one direction and barrier line both directions)

edge lines

The candidate must demonstrate knowledge in conducting long line road marking operations through:

accessing, interpreting and applying legislative, organisation and site requirements and procedures for:

work, health and safety

equipment operation

operational, maintenance and basic diagnostics

JSAs/safe work method statements

housekeeping

identifying and applying road markings

identifying equipment types, characteristics, technical capabilities and limitations

complying with project quality requirements

identifying and using civil construction terminology

complying with site isolation and traffic control responsibilities and authorities

identifying road marking materials

applying ride on road marking activities and techniques

complying with safety data sheets and materials handling methods

applying processes for the calculation of material requirements, application rates and travel speed

being prepared for fire/accident/emergency


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

1. Plan and prepare to conduct long line road marking operations

1.1 Access, interpret and apply long line road marking operations documentation and ensure the work activity is compliant

1.2 Obtain, interpret, clarify and confirm work instructions before proceeding

1.3 Identify and implement traffic management signage requirements

1.4 Select and check for faults plant, tools and equipment to carry out tasks

1.5 Identify, address and report hazards, risks and environmental issues

1.6 Select and wear correct personal protective equipment appropriate for work activities

1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency

2. Conduct pre-operational checks

2.1 Check/inflate tyres

2.2 Carry out pre-start, start-up, park up, shutdown and secure equipment procedures

2.3 Check road marking plant controls and functions, including brakes and manoeuvrability for serviceability, and report faults

3. Operate long line road marking plant

3.1 Drive and operate equipment

3.2 Manage engine power to ensure efficiency of plant movements and to minimise damage to the engine and gears

3.3 Position vehicle correctly prior to marking run to enable uninterrupted flow of road marking material

3.4 Maintain control and alignment on marking run

3.5 Apply road marking material to the surface providing an even coverage

4. Carry out operator maintenance

4.1 Prepare machine for maintenance

4.2 Conduct inspection and fault finding

4.3 Carry out scheduled maintenance tasks

4.4 Process written maintenance records

5. Clean up

5.1 Clear work area and dispose of or recycle materials

5.2 Return surplus fuel and lubricants to storage

5.3 Clean, check, maintain and store plant, tools and equipment

5.4 Carry out housekeeping activities

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Access, interpret and apply long line road marking operations documentation and ensure the work activity is compliant 
Obtain, interpret, clarify and confirm work instructions before proceeding 
Identify and implement traffic management signage requirements 
Select and check for faults plant, tools and equipment to carry out tasks 
Identify, address and report hazards, risks and environmental issues 
Select and wear correct personal protective equipment appropriate for work activities 
Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency 
Check/inflate tyres 
Carry out pre-start, start-up, park up, shutdown and secure equipment procedures 
Check road marking plant controls and functions, including brakes and manoeuvrability for serviceability, and report faults 
Drive and operate equipment 
Manage engine power to ensure efficiency of plant movements and to minimise damage to the engine and gears 
Position vehicle correctly prior to marking run to enable uninterrupted flow of road marking material 
Maintain control and alignment on marking run 
Apply road marking material to the surface providing an even coverage 
Prepare machine for maintenance 
Conduct inspection and fault finding 
Carry out scheduled maintenance tasks 
Process written maintenance records 
Clear work area and dispose of or recycle materials 
Return surplus fuel and lubricants to storage 
Clean, check, maintain and store plant, tools and equipment 
Carry out housekeeping activities 
Access, interpret and apply long line road marking operations documentation and ensure the work activity is compliant 
Obtain, interpret, clarify and confirm work instructions before proceeding 
Identify and implement traffic management signage requirements 
Select and check for faults plant, tools and equipment to carry out tasks 
Identify, address and report hazards, risks and environmental issues 
Select and wear correct personal protective equipment appropriate for work activities 
Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency 
Check/inflate tyres 
Carry out pre-start, start-up, park up, shutdown and secure equipment procedures 
Check road marking plant controls and functions, including brakes and manoeuvrability for serviceability, and report faults 
Drive and operate equipment 
Manage engine power to ensure efficiency of plant movements and to minimise damage to the engine and gears 
Position vehicle correctly prior to marking run to enable uninterrupted flow of road marking material 
Maintain control and alignment on marking run 
Apply road marking material to the surface providing an even coverage 
Prepare machine for maintenance 
Conduct inspection and fault finding 
Carry out scheduled maintenance tasks 
Process written maintenance records 
Clear work area and dispose of or recycle materials 
Return surplus fuel and lubricants to storage 
Clean, check, maintain and store plant, tools and equipment 
Carry out housekeeping activities 

Forms

Assessment Cover Sheet

RIICRM302D - Conduct long line road marking operations
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

RIICRM302D - Conduct long line road marking operations

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: