Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

RIIHAN213D Mapping and Delivery Guide
Work effectively in the drilling Industry

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency RIIHAN213D - Work effectively in the drilling Industry
Description
Employability Skills
Learning Outcomes and Application This unit describes a participant’s skills and knowledge required to work effectively in Drilling.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories and Industry sectors. Relevant information must be sourced prior to application of the unit.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,

this unit must be assessed in the context of this sector’s work environment; and,

this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,

assessment may be conducted in conjunction with the assessment of other Units of Competency; and,

assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,

assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,

where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,

assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:

Industry sector

AQF** Level

Required assessor or Industry subject matter expert experience

Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction

1

1 Year

2

2 Years

Drilling, Coal Mining and Extractive (Quarrying)

3-6

3 Years

Metalliferous Mining and Civil Construction

3-6

5 Years

Other sectors

Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation.

*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.

**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level

Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare for working in the drilling Industry
  • Access, interpret and apply relevant drilling documentation and ensure the work activity is compliant
  • Obtain, read, interpret, clarify and confirm work requirements
  • Identify and address potential risks, hazards and environmental issues, and implement control measures
  • Select and wear personal protective equipment appropriate for work activities
  • Communicate and coordinate activities with others throughout the work activity
       
Element: Perform safe manual handling
  • Assess load to be moved
  • Assess and plan stability of the lift, transport route and lay down position
  • Use manual handling techniques and aids safely and effectively and seek assistance where required
       
Element: Routinely practice good housekeeping
  • Keep all housekeeping areas clean, neat and tidy
  • Keep all tools and equipment clean and stored in the correct place
  • Identify and report potential hazards from poor housekeeping
  • Implement routine of good housekeeping practices
  • Report equipment problems verbally or in writing
       
Element: Complete pre-start checks
  • Walk around plant/equipment/vehicle checking all items are serviceable and in good condition
  • Check and top up fluids as required
  • Check all guards and safety devices are in place and serviceable
  • Ensure all personnel are clear or in a safe position before starting
  • Complete required written records and reporting
       
Element: Refuel vehicles and plant
  • Enforce no-smoking zone while refuelling
  • Select correct fuel
  • Refuel engine
  • Clean up any spills
  • Leave fuel storage area clean and tidy
  • Note remaining fuel supply
  • Complete written records/reporting
       
Element: Drive vehicle
  • Check vehicle roadworthiness, load distribution and security before starting
  • Identify potential vehicle hazards from road trip/load and implement hazard minimisation procedures
  • Plan trip to maximise safety and minimise cost
  • Drive vehicle in compliance with local conditions and road/site rules
  • Correctly park and secure vehicle
  • Correctly change wheel as required
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

1. Plan and prepare for working in the drilling Industry

1.1 Access, interpret and apply relevant drilling documentation and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements

1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures

1.4 Select and wear personal protective equipment appropriate for work activities

1.5 Communicate and coordinate activities with others throughout the work activity

2. Perform safe manual handling

2.1 Assess load to be moved

2.2 Assess and plan stability of the lift, transport route and lay down position

2.3 Use manual handling techniques and aids safely and effectively and seek assistance where required

3. Routinely practice good housekeeping

3.1 Keep all housekeeping areas clean, neat and tidy

3.2 Keep all tools and equipment clean and stored in the correct place

3.3 Identify and report potential hazards from poor housekeeping

3.4 Implement routine of good housekeeping practices

3.5 Report equipment problems verbally or in writing

4. Complete pre-start checks

4.1 Walk around plant/equipment/vehicle checking all items are serviceable and in good condition

4.2 Check and top up fluids as required

4.3 Check all guards and safety devices are in place and serviceable

4.4 Ensure all personnel are clear or in a safe position before starting

4.5 Complete required written records and reporting

5. Refuel vehicles and plant

5.1 Enforce no-smoking zone while refuelling

5.2 Select correct fuel

5.3 Refuel engine

5.4 Clean up any spills

5.5 Leave fuel storage area clean and tidy

5.6 Note remaining fuel supply

5.7 Complete written records/reporting

6. Drive vehicle

6.1 Check vehicle roadworthiness, load distribution and security before starting

6.2 Identify potential vehicle hazards from road trip/load and implement hazard minimisation procedures

6.3 Plan trip to maximise safety and minimise cost

6.4 Drive vehicle in compliance with local conditions and road/site rules

6.5 Correctly park and secure vehicle

6.6 Correctly change wheel as required

Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:

locates and applies relevant documentation, policies and procedures

implements the requirements, procedures and techniques for the safe, effective and efficient completion of working effectively in the Drilling Industry including:

planning and preparing for manual handling

identifying hazards

reporting equipment problems

works effectively with others to undertake and complete working effectively in the Drilling Industry that meet all of the required outcomes including:

using a range of communication techniques and equipment to convey information to others

communicating hazards and determining elimination or control of hazards

organising work activities to meet task requirements

demonstrates completion of working effectively in the drilling industry that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:

performing manual handling

completing pre-start checks

refuelling vehicles and plant

driving, parking and securing vehicle

changing a wheel

The candidate must demonstrate knowledge of the following when working effectively in the drilling Industry:

accessing, interpreting and applying organisation and site requirements and procedures for:

housekeeping tasks

pre-start checks

hazard identification when driving and refuelling

work health and safety

jacking and wheel changing techniques

manual handling techniques


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

1. Plan and prepare for working in the drilling Industry

1.1 Access, interpret and apply relevant drilling documentation and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements

1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures

1.4 Select and wear personal protective equipment appropriate for work activities

1.5 Communicate and coordinate activities with others throughout the work activity

2. Perform safe manual handling

2.1 Assess load to be moved

2.2 Assess and plan stability of the lift, transport route and lay down position

2.3 Use manual handling techniques and aids safely and effectively and seek assistance where required

3. Routinely practice good housekeeping

3.1 Keep all housekeeping areas clean, neat and tidy

3.2 Keep all tools and equipment clean and stored in the correct place

3.3 Identify and report potential hazards from poor housekeeping

3.4 Implement routine of good housekeeping practices

3.5 Report equipment problems verbally or in writing

4. Complete pre-start checks

4.1 Walk around plant/equipment/vehicle checking all items are serviceable and in good condition

4.2 Check and top up fluids as required

4.3 Check all guards and safety devices are in place and serviceable

4.4 Ensure all personnel are clear or in a safe position before starting

4.5 Complete required written records and reporting

5. Refuel vehicles and plant

5.1 Enforce no-smoking zone while refuelling

5.2 Select correct fuel

5.3 Refuel engine

5.4 Clean up any spills

5.5 Leave fuel storage area clean and tidy

5.6 Note remaining fuel supply

5.7 Complete written records/reporting

6. Drive vehicle

6.1 Check vehicle roadworthiness, load distribution and security before starting

6.2 Identify potential vehicle hazards from road trip/load and implement hazard minimisation procedures

6.3 Plan trip to maximise safety and minimise cost

6.4 Drive vehicle in compliance with local conditions and road/site rules

6.5 Correctly park and secure vehicle

6.6 Correctly change wheel as required

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Access, interpret and apply relevant drilling documentation and ensure the work activity is compliant 
Obtain, read, interpret, clarify and confirm work requirements 
Identify and address potential risks, hazards and environmental issues, and implement control measures 
Select and wear personal protective equipment appropriate for work activities 
Communicate and coordinate activities with others throughout the work activity 
Assess load to be moved 
Assess and plan stability of the lift, transport route and lay down position 
Use manual handling techniques and aids safely and effectively and seek assistance where required 
Keep all housekeeping areas clean, neat and tidy 
Keep all tools and equipment clean and stored in the correct place 
Identify and report potential hazards from poor housekeeping 
Implement routine of good housekeeping practices 
Report equipment problems verbally or in writing 
Walk around plant/equipment/vehicle checking all items are serviceable and in good condition 
Check and top up fluids as required 
Check all guards and safety devices are in place and serviceable 
Ensure all personnel are clear or in a safe position before starting 
Complete required written records and reporting 
Enforce no-smoking zone while refuelling 
Select correct fuel 
Refuel engine 
Clean up any spills 
Leave fuel storage area clean and tidy 
Note remaining fuel supply 
Complete written records/reporting 
Check vehicle roadworthiness, load distribution and security before starting 
Identify potential vehicle hazards from road trip/load and implement hazard minimisation procedures 
Plan trip to maximise safety and minimise cost 
Drive vehicle in compliance with local conditions and road/site rules 
Correctly park and secure vehicle 
Correctly change wheel as required 

Forms

Assessment Cover Sheet

RIIHAN213D - Work effectively in the drilling Industry
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

RIIHAN213D - Work effectively in the drilling Industry

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: