List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice	Yes	No	Comments/feedback
Access, interpret and apply underground truck operations documentation
Obtain, interpret, clarify and confirm work requirements
Identify hazards and environmental issues, assess the risks and implement control measures in line with workplace policies
Select and wear personal protective equipment required for work activities
Inspect and assess site conditions to determine if scaling is required and take action according to workplace procedures
Apply approved dust suppression and extraction methods
Coordinate and communicate planned activities with others at the site prior to commencement of work activity
Carry out prestart and start-up checks in line with workplace procedures
Identify faults or defects and rectify or report within scope of own responsibility and according to workplace procedures
Drive and operate truck using techniques suited to equipment capabilities, site and work conditions, and according to workplace procedures
Check work area for spillage prior to entering the loading area to prevent plant and tyre damage
Position truck for loading clear of services
Remain in truck when loading or at safe distance from loading operation
Confirm type of material and haul to designated location
Maintain hauling efficiency by managing working environment
Monitor and manage equipment performance using appropriate indicators to aid efficient operations
Identify, remove, and dispose of contaminants
Identify and manage spillages on hauling surface
Check tray position according to workplace procedures before equipment is in motion
Check safety provisions are in place before entering and leaving tipping site
Position truck in safe area
Discharge load according to workplace procedures
Lower or retract tray fully according to manufacturer requirements and workplace procedures before driving off the tipping area
Park up, shut down, secure and carry out post operational inspection of equipment in line with workplace procedures
Clean equipment to maintain condition of equipment and ensure safe and efficient operations
Manage and/or report hazards to maintain a safe working environment
Complete and file or distribute documentation in a manner that complies with workplace practices

Assessment Cover Sheet

RIIMPO210E - Conduct underground truck operations

Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

RIIMPO210E - Conduct underground truck operations

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: