Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

RIIMPO309E Mapping and Delivery Guide
Conduct wheeled dozer operations

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency RIIMPO309E - Conduct wheeled dozer operations
Description
Employability Skills
Learning Outcomes and Application This unit describes a participant’s skills and knowledge required to conduct wheeled dozer operations in coal and metalliferous mining, civil construction and extractive.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the unit.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must satisfy the Standards for Registered Training Organisations (RTOs) 2015/AQTF mandatory competency requirements for assessors; and industry regulations for certification and licensing; and,

this unit must be assessed in the context of this sector’s work environment; and,

this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,

assessment may be conducted in conjunction with the assessment of other units of competency; and,

assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,

assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this unit of competency, and through the minimum years of current* work experience specified below in an industry sector relevant to the outcomes of the unit; or,

where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an industry subject matter expert. The industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the industry sector, including time spent in roles related to the unit being assessed; and,

assessor and industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or industry sector as follows:

Industry sector

AQF** Level

Required assessor or industry subject matter expert experience

Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction

1

1 Year

2

2 Years

Drilling, Coal Mining and Extractive (Quarrying)

3-6

3 Years

Metalliferous Mining and Civil Construction

3-6

5 Years

Other sectors

Where this unit is being assessed outside of the Resources and Infrastructure Sectors, assessor and/or industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and, where no industry standard is specified, should comply with any relevant regulation.

*Assessors can demonstrate current work experience through employment within industry in a role relevant to the outcomes of the unit; or, for external assessors this can be demonstrated through exposure to industry by conducting frequent site assessments across various locations.

**Where a unit is being delivered outside of a qualification the first numeric character in the unit code should be considered to indicate the AQF level.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare for wheeled dozer operations
  • Access, interpret and apply wheeled dozer operations documentation and ensure the work activity is compliant
  • Obtain, read, interpret, clarify and confirm work requirements
  • Identify and address risks, hazards and environmental issues and implement control measures
  • Select and wear personal protective equipment appropriate for work activities
  • Access, interpret and apply geological and survey data required to complete the allocated work
  • Inspect and prepare work area in coordination with others
  • Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
       
Element: Operate wheeled dozer
  • Coordinate activities with others at the site prior to commencement of, and during the work activity
  • Carry out pre-start, start-up, park-up shutdown and secure equipment procedures
  • Control speed and articulated steering of the wheeled dozer during tramming operations
  • Use dozer controls and functions effectively, including manoeuvre attachments to complete tasks
  • Carry out towing of equipment and plant safely within equipment and/or connection capabilities
  • Maintain safe grip, traction and productivity in varied operating conditions
  • Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment
  • Complete work plan, within the operating capacities of equipment
       
Element: Carry out operator maintenance
  • Prepare machine for maintenance
  • Conduct inspection and fault finding
  • Carry out scheduled maintenance tasks
  • Return the machine to service
  • Process written maintenance records
       
Element: Conduct housekeeping activities
  • Clear work area and dispose of or recycle materials
  • Process records
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

1. Plan and prepare for wheeled dozer operations

1.1 Access, interpret and apply wheeled dozer operations documentation and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements

1.3 Identify and address risks, hazards and environmental issues and implement control measures

1.4 Select and wear personal protective equipment appropriate for work activities

1.5 Access, interpret and apply geological and survey data required to complete the allocated work

1.6 Inspect and prepare work area in coordination with others

1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency

2. Operate wheeled dozer

2.1 Coordinate activities with others at the site prior to commencement of, and during the work activity

2.2 Carry out pre-start, start-up, park-up shutdown and secure equipment procedures

2.3 Control speed and articulated steering of the wheeled dozer during tramming operations

2.4 Use dozer controls and functions effectively, including manoeuvre attachments to complete tasks

2.5 Carry out towing of equipment and plant safely within equipment and/or connection capabilities

2.6 Maintain safe grip, traction and productivity in varied operating conditions

2.7 Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment

2.8 Complete work plan, within the operating capacities of equipment

3. Carry out operator maintenance

3.1 Prepare machine for maintenance

3.2 Conduct inspection and fault finding

3.3 Carry out scheduled maintenance tasks

3.4 Return the machine to service

3.5 Process written maintenance records

4. Conduct housekeeping activities

4.1 Clear work area and dispose of or recycle materials

4.2 Process records

Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:

locates and applies relevant documentation, policies and procedures

implements the requirements, procedures and techniques for the safe, effective and efficient completion of wheeled dozer operations including:

conducting prestart checks prior to commencing operations and shutdown procedures on completion of operations

carrying out vehicle refuelling requirements and procedures

driving and operating the equipment to site conditions

applying safe work practices and identifying and reporting all potential hazards, risks and environmental issues

applying problem solving and troubleshooting techniques

carrying out towing and pushing of equipment and plant

selecting and using the required tools and equipment

working safely around other machines, infrastructure and personnel

works effectively with others to undertake and complete wheeled dozer operations that meet all of the required outcomes including:

using a range of communications techniques and equipment to convey information to others

maintaining written and verbal reporting requirements and procedures

communicating clearly and concisely with others to receive and clarify work instructions

demonstrates completion of wheeled dozer operations that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:

completing a minimum of three (3) of the following wheeled dozer operations:

manoeuvring dozer

blade application

ripper application

towing and pushing

pushing and preparing overburden

bench and pad preparation

trimming and cutting

building and maintaining stockpiles

supporting other vehicles

creation of windrows

dump establishment

road works

contours

batters

rehabilitation and drainage

final landform and the interpretation of associated survey pegs

sealing tailing dams

working safely around:

overhead power lines

other machines and personnel

The candidate must demonstrate knowledge of the following when conducting wheeled dozer operations:

isolation procedures

equipment processes, technical capability and limitations

interpretation of plans, reports, maps, specifications

geological and technical data (basic)

signs of operator fatigue and how it should be managed

dozer operational procedures and techniques (including towing and pushing)

operational, maintenance and basic diagnostics

housekeeping activities

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

1. Plan and prepare for wheeled dozer operations

1.1 Access, interpret and apply wheeled dozer operations documentation and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements

1.3 Identify and address risks, hazards and environmental issues and implement control measures

1.4 Select and wear personal protective equipment appropriate for work activities

1.5 Access, interpret and apply geological and survey data required to complete the allocated work

1.6 Inspect and prepare work area in coordination with others

1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency

2. Operate wheeled dozer

2.1 Coordinate activities with others at the site prior to commencement of, and during the work activity

2.2 Carry out pre-start, start-up, park-up shutdown and secure equipment procedures

2.3 Control speed and articulated steering of the wheeled dozer during tramming operations

2.4 Use dozer controls and functions effectively, including manoeuvre attachments to complete tasks

2.5 Carry out towing of equipment and plant safely within equipment and/or connection capabilities

2.6 Maintain safe grip, traction and productivity in varied operating conditions

2.7 Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment

2.8 Complete work plan, within the operating capacities of equipment

3. Carry out operator maintenance

3.1 Prepare machine for maintenance

3.2 Conduct inspection and fault finding

3.3 Carry out scheduled maintenance tasks

3.4 Return the machine to service

3.5 Process written maintenance records

4. Conduct housekeeping activities

4.1 Clear work area and dispose of or recycle materials

4.2 Process records

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Access, interpret and apply wheeled dozer operations documentation and ensure the work activity is compliant 
Obtain, read, interpret, clarify and confirm work requirements 
Identify and address risks, hazards and environmental issues and implement control measures 
Select and wear personal protective equipment appropriate for work activities 
Access, interpret and apply geological and survey data required to complete the allocated work 
Inspect and prepare work area in coordination with others 
Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency 
Coordinate activities with others at the site prior to commencement of, and during the work activity 
Carry out pre-start, start-up, park-up shutdown and secure equipment procedures 
Control speed and articulated steering of the wheeled dozer during tramming operations 
Use dozer controls and functions effectively, including manoeuvre attachments to complete tasks 
Carry out towing of equipment and plant safely within equipment and/or connection capabilities 
Maintain safe grip, traction and productivity in varied operating conditions 
Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment 
Complete work plan, within the operating capacities of equipment 
Prepare machine for maintenance 
Conduct inspection and fault finding 
Carry out scheduled maintenance tasks 
Return the machine to service 
Process written maintenance records 
Clear work area and dispose of or recycle materials 
Process records 

Forms

Assessment Cover Sheet

RIIMPO309E - Conduct wheeled dozer operations
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

RIIMPO309E - Conduct wheeled dozer operations

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: