Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

RIINHB203A Mapping and Delivery Guide
Support drilling process

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency RIINHB203A - Support drilling process
Description This unit covers supporting the drilling process in resources and infrastructure industries. It includes: planning and preparing for supporting the drilling process, operating ancillary equipment, cleaning all equipment at drilling site, maintaining levels of supplies, and performing basic measurement and calculations.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application This unit is appropriate for those working in drillers assistant roles, at worksites within:Civil constructionCoal miningDrillingExtractive industries Metalliferous mining
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites Not applicable. Not applicable.
Competency Field Refer to Unit Sector(s).
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare for supporting the drilling process
  • Access, interpret and apply compliance documentation relevant to the work activity
  • Obtain, confirm and apply work instructions for the allocated task
  • Identify, manage and report all potential hazards
  • Resolve coordination requirements with others at the site prior to commencing and during work activities
       
Element: Operate ancillary equipment
  • Start-up, run, and close down ancillary equipment
       
Element: Clean all equipment at drilling site
  • Maintain clean working conditions to minimise any associated safety hazards
  • Clean and store vehicles routinely after use to requirements
  • Maintain machines and equipment in a clean and serviced condition at all times
  • Use cleaning equipment safely and effectively
  • Apply approved instructions and occupational health and safety requirements on the use of hazardous chemicals for cleaning and drilling
  • Ensure that all cleaning equipment is kept in good working condition
       
Element: Maintain levels of supplies
  • Keep driller informed on current stock levels
  • Check on availability of consumable items in the workplace regularly
  • Complete record keeping, stock counts and paper work as required
       
Element: Perform basic measurement and calculations
  • Read tape measure accurately to carry out simple measurements
  • Carry out simple calculations and measurements
  • Record legibly on all reports
       
Element: Carry out basic operator maintenance
  • Identify hazards, and methods of minimising hazards, in conducting maintenance, particularly in the field
  • Carry out minor repairs and replacements as required
  • Overcome minor breakdowns and bogging using recovery techniques as required
  • Carry out vehicle washing and housekeeping regularly
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to worksite operations and satisfy all of the requirements of the performance criteria, required skills and knowledge and the range statement of this unit and include evidence of the following:

knowledge of the requirements, procedures and instructions for supporting the drilling process

implementation of requirements, procedures and techniques for the safe, effective and efficient completion of support of the drilling process

working with others to undertake and complete the support of the drilling process that meets all of the required outcomes

consistent timely completion of the support of the drilling process that safely, effectively and efficiently meets the required outcomes

Context of and specific resources for assessment

This unit must be assessed in the context of the work environment. Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills.

Customisation of assessment and delivery environment to sensitively accommodate cultural diversity.

Aboriginal people and other people from a non English speaking background may have second language issues.

Assessment of this competency requires typical resources normally used in the work environment. Selection and use of resources for particular worksites may differ due to site circumstances.

Where applicable, physical resources should include equipment modified for people with disabilities.

Access must be provided to appropriate learning and/or assessment support when required.

Method of assessment

This unit may be assessed in a holistic way with other units of competency. The assessment strategy for this unit must verify required knowledge and skill and practical application using more than one of the following assessment methods:

written and/or oral assessment of the candidate's required knowledge

observed, documented and/or first hand testimonial evidence of the candidate's:

implementation of appropriate requirement, procedures and techniques for the safe, effective and efficient achievement of required outcomes

consistently achieving the required outcomes

first hand testimonial evidence of the candidate's:

working with others to undertake and complete the support of the drilling process

Guidance information for assessment

Consult the SkillsDMC User Guide for further information on assessment including access and equity issues.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

Specific skills are required to achieve the performance criteria in this unit, particularly for the application in the various circumstances in which this unit may be applied. This includes the ability to carry out the following as required to support the drilling process:

apply legislative, organisation and site requirements and procedures

operate pressure cleaners

apply basic operator servicing and maintenance of plant and vehicles

apply communication procedures

use lifting equipment

identify weathered and fresh rock

Required knowledge

Specific knowledge is required to achieve the Performance Criteria of this unit, particularly its application in a variety of circumstances in which the unit may be used. This includes knowledge of the following, as required to support the drilling process:

site and equipment safety requirements

equipment characteristics, technical capabilities and limitations

operational and maintenance procedures

layout of basic hydraulic circuits

hydraulic and pneumatic systems

basic geological and technical data

environmental requirements and procedures

team roles and objectives

interpretation and prediction techniques using graphical representation, e.g. maps and diagrams

requirements to ensure cost effective operations, including work practices that limit damage to equipment and minimise use of consumables

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Relevant compliance documentation

may include:

legislative, organisational and site requirements and procedures

manufacturer's guidelines and specifications

Australian standards

code of practice

Employment and workplace relations legislation

Equal Employment Opportunity and Disability Discrimination legislation

Work instructions may come from:

briefings, handovers, plans and work orders and may be written or verbal, formal or informal and may include:

nature and scope of tasks

specifications

quality of finished works

achievement targets

operational conditions

obtaining of permits required

site layout

out of bounds areas

worksite inspection requirements

lighting conditions

plant or equipment defects

hazards and potential hazards

coordination requirements or issues

contamination control requirements

environmental control requirements

barricade and signage requirements

Hazards may include:

spread of contaminants as a result of drilling or cleaning processes

working in proximity to drilling rig

use of high pressure air for drilling operations

entanglement in rotating pipes

string makeup and breakout hazards

drilling equipment and down-hole tools

Coordination requirements may include

driller

other equipment operators

maintenance personnel

supervisors

mine personnel

Ancillary equipment may include:

generators (welding/lighting)

pumps

compressors

high pressure cleaning equipment (gernies)

power tools

hand tools

grout mixing

drill fluid (mud) mixing equipment

Cleaning equipment may include:

pressure cleaning

chemical cleaning

manual cleaning

abrasive mechanical cleaning

Calculations and measurements may include:

diameters of drill bits, casing, hole

rod volumes

hole volumes

tank volumes

annular volumes

length of casing

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Access, interpret and apply compliance documentation relevant to the work activity 
Obtain, confirm and apply work instructions for the allocated task 
Identify, manage and report all potential hazards 
Resolve coordination requirements with others at the site prior to commencing and during work activities 
Start-up, run, and close down ancillary equipment 
Maintain clean working conditions to minimise any associated safety hazards 
Clean and store vehicles routinely after use to requirements 
Maintain machines and equipment in a clean and serviced condition at all times 
Use cleaning equipment safely and effectively 
Apply approved instructions and occupational health and safety requirements on the use of hazardous chemicals for cleaning and drilling 
Ensure that all cleaning equipment is kept in good working condition 
Keep driller informed on current stock levels 
Check on availability of consumable items in the workplace regularly 
Complete record keeping, stock counts and paper work as required 
Read tape measure accurately to carry out simple measurements 
Carry out simple calculations and measurements 
Record legibly on all reports 
Identify hazards, and methods of minimising hazards, in conducting maintenance, particularly in the field 
Carry out minor repairs and replacements as required 
Overcome minor breakdowns and bogging using recovery techniques as required 
Carry out vehicle washing and housekeeping regularly 

Forms

Assessment Cover Sheet

RIINHB203A - Support drilling process
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

RIINHB203A - Support drilling process

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: