Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

RIINHB324D Mapping and Delivery Guide
Carry out grouting or cementing operations

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency RIINHB324D - Carry out grouting or cementing operations
Description
Employability Skills
Learning Outcomes and Application This unit describes a participant’s skills and knowledge required to carry out grouting or cementing operations in Drilling. This unit is appropriate for those working in driller roles.No licensing, legislative or certification requirements apply to this unit at the time of publication
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,

this unit must be assessed in the context of this sector’s work environment; and,

this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,

assessment may be conducted in conjunction with the assessment of other Units of Competency; and,

assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,

assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,

where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,

assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:

Industry sector

AQF** Level

Required assessor or Industry subject matter expert experience

Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction

1

1 Year

2

2 Years

Drilling, Coal Mining and Extractive (Quarrying)

3-6

3 Years

Metalliferous Mining and Civil Construction

3-6

5 Years

Other sectors

Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation.

*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.

**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare for the grouting or cementing process
  • Access, interpret and apply grouting or cementing operations documentation and ensure the work activity is compliant
  • Obtain, read, interpret, clarify and confirm work requirements
  • Identify and address potential risks, hazards and environmental issues and implement control measures
  • Select and wear personal protective equipment appropriate for work activities
  • Communicate and coordinate activities with others throughout the work activity
  • Ensure adequate material and equipment is available to complete the task successfully
  • Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
  • Select the appropriate grouting or cementing procedure to suite the application
       
Element: Perform measurement and calculations
  • Read tape measure accurately to carry out measurements of tank capacities, casing or rod lengths
  • Record or complete tally sheets for number of lengths of casing placed in the hole
  • Carry out calculations and measurements
  • Record legibly on all reports
       
Element: Conduct grouting or cementing of hole
  • Start-up, run, and close down ancillary equipment
  • Manage mixing grout and any additives
  • Access, interpret and apply safety data sheets (SDS)
  • Conduct grouting or cementing of hole using appropriate equipment and techniques
  • Monitor process to ensure consistency and accuracy of placed grout or cement
  • Construct well head, hole identification and install hole security devices where required
  • Dispose of any excess grout or cement according to site waste management procedures
       
Element: Respond to problems
  • Identify possible operational problems in equipment or process
  • Identify symptoms of problems needing remedial action
  • Determine possible fault causes
  • Rectify problem using appropriate solution within area of responsibility
  • Follow through items initiated until final resolution has occurred
  • Report problems outside area of responsibility to designated person
       
Element: Complete equipment maintenance and housekeeping
  • Ensure there is no spillage of grout, cement or additives to minimise any associated safety hazards
  • Ensure cleaning equipment is used safely and effectively
  • Provide instructions and occupational health and safety requirements on the use of hazardous chemicals for cleaning
  • Maintain tools and equipment kept in good working condition
  • Ensure housekeeping activities are completed
  • Process records
       
Element: Plan and prepare for the grouting or cementing process
  • Access, interpret and apply grouting or cementing operations documentation and ensure the work activity is compliant
  • Obtain, read, interpret, clarify and confirm work requirements
  • Identify and address potential risks, hazards and environmental issues and implement control measures
  • Select and wear personal protective equipment appropriate for work activities
  • Communicate and coordinate activities with others throughout the work activity
  • Ensure adequate material and equipment is available to complete the task successfully
  • Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
  • Select the appropriate grouting or cementing procedure to suite the application
       
Element: Perform measurement and calculations
  • Read tape measure accurately to carry out measurements of tank capacities, casing or rod lengths
  • Record or complete tally sheets for number of lengths of casing placed in the hole
  • Carry out calculations and measurements
  • Record legibly on all reports
       
Element: Conduct grouting or cementing of hole
  • Start-up, run, and close down ancillary equipment
  • Manage mixing grout and any additives
  • Access, interpret and apply safety data sheets (SDS)
  • Conduct grouting or cementing of hole using appropriate equipment and techniques
  • Monitor process to ensure consistency and accuracy of placed grout or cement
  • Construct well head, hole identification and install hole security devices where required
  • Dispose of any excess grout or cement according to site waste management procedures
       
Element: Respond to problems
  • Identify possible operational problems in equipment or process
  • Identify symptoms of problems needing remedial action
  • Determine possible fault causes
  • Rectify problem using appropriate solution within area of responsibility
  • Follow through items initiated until final resolution has occurred
  • Report problems outside area of responsibility to designated person
       
Element: Complete equipment maintenance and housekeeping
  • Ensure there is no spillage of grout, cement or additives to minimise any associated safety hazards
  • Ensure cleaning equipment is used safely and effectively
  • Provide instructions and occupational health and safety requirements on the use of hazardous chemicals for cleaning
  • Maintain tools and equipment kept in good working condition
  • Ensure housekeeping activities are completed
  • Process records
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

1. Plan and prepare for the grouting or cementing process

1.1 Access, interpret and apply grouting or cementing operations documentation and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements

1.3 Identify and address potential risks, hazards and environmental issues and implement control measures

1.4 Select and wear personal protective equipment appropriate for work activities

1.5 Communicate and coordinate activities with others throughout the work activity

1.6 Ensure adequate material and equipment is available to complete the task successfully

1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency

1.8 Select the appropriate grouting or cementing procedure to suite the application

2. Perform measurement and calculations

2.1 Read tape measure accurately to carry out measurements of tank capacities, casing or rod lengths

2.2 Record or complete tally sheets for number of lengths of casing placed in the hole

2.3 Carry out calculations and measurements

2.4 Record legibly on all reports

3. Conduct grouting or cementing of hole

3.1 Start-up, run, and close down ancillary equipment

3.2 Manage mixing grout and any additives

3.3 Access, interpret and apply safety data sheets (SDS)

3.4 Conduct grouting or cementing of hole using appropriate equipment and techniques

3.5 Monitor process to ensure consistency and accuracy of placed grout or cement

3.6 Construct well head, hole identification and install hole security devices where required

3.7 Dispose of any excess grout or cement according to site waste management procedures

4. Respond to problems

4.1 Identify possible operational problems in equipment or process

4.2 Identify symptoms of problems needing remedial action

4.3 Determine possible fault causes

4.4 Rectify problem using appropriate solution within area of responsibility

4.5 Follow through items initiated until final resolution has occurred

4.6 Report problems outside area of responsibility to designated person

5. Complete equipment maintenance and housekeeping

5.1 Ensure there is no spillage of grout, cement or additives to minimise any associated safety hazards

5.2 Ensure cleaning equipment is used safely and effectively

5.3 Provide instructions and occupational health and safety requirements on the use of hazardous chemicals for cleaning

5.4 Maintain tools and equipment kept in good working condition

5.5 Ensure housekeeping activities are completed

5.6 Process records

Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:

locates and applies relevant documentation, policies and procedures

implements the requirements, procedures and techniques for the safe, effective and efficient completion of grouting or cementing operations in the drilling industry including:

operating mixing equipment

operating cleaning equipment

measuring tank dimensions and calculate volumes

calculating specific gravity of mixtures and hydrostatic pressures including pressure differences between annulus and inside of casing

recording casing lengths and quantities accurately

works effectively with others to undertake and complete the grouting or cementing operations that meet all of the required outcomes including:

complying with written and verbal reporting requirements and procedures

communicating clearly and concisely with others to receive and clarify work instructions

communicating clearly and concisely with others to resolve coordination requirements prior to commencing and during work activities

demonstrates completion of grouting or cementing operations that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:

managing the mixing of grout and any additives

accessing, interpreting and applying safety data sheets (SDS)

ensuring consistency and accuracy of placed grout or cement

constructing well head, hole identification and installing hole security devices where required

ensuring there is no spillage of grout, cement or additives to minimise any associated safety hazards

disposing of any excess grout or cement according to site waste management procedures

The candidate must demonstrate knowledge in carrying out grouting or cementing operations through:

accessing, interpreting and applying the organization and site requirements and procedures for;

work, health and safety

environmental issues

operating drill rig

housekeeping

possible effects of grout, cement or cement additives on health

team roles and objectives during the grouting or cementing operations

properties of grout, cement or cement additives

being prepared for fire/accident/emergency

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

1. Plan and prepare for the grouting or cementing process

1.1 Access, interpret and apply grouting or cementing operations documentation and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements

1.3 Identify and address potential risks, hazards and environmental issues and implement control measures

1.4 Select and wear personal protective equipment appropriate for work activities

1.5 Communicate and coordinate activities with others throughout the work activity

1.6 Ensure adequate material and equipment is available to complete the task successfully

1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency

1.8 Select the appropriate grouting or cementing procedure to suite the application

2. Perform measurement and calculations

2.1 Read tape measure accurately to carry out measurements of tank capacities, casing or rod lengths

2.2 Record or complete tally sheets for number of lengths of casing placed in the hole

2.3 Carry out calculations and measurements

2.4 Record legibly on all reports

3. Conduct grouting or cementing of hole

3.1 Start-up, run, and close down ancillary equipment

3.2 Manage mixing grout and any additives

3.3 Access, interpret and apply safety data sheets (SDS)

3.4 Conduct grouting or cementing of hole using appropriate equipment and techniques

3.5 Monitor process to ensure consistency and accuracy of placed grout or cement

3.6 Construct well head, hole identification and install hole security devices where required

3.7 Dispose of any excess grout or cement according to site waste management procedures

4. Respond to problems

4.1 Identify possible operational problems in equipment or process

4.2 Identify symptoms of problems needing remedial action

4.3 Determine possible fault causes

4.4 Rectify problem using appropriate solution within area of responsibility

4.5 Follow through items initiated until final resolution has occurred

4.6 Report problems outside area of responsibility to designated person

5. Complete equipment maintenance and housekeeping

5.1 Ensure there is no spillage of grout, cement or additives to minimise any associated safety hazards

5.2 Ensure cleaning equipment is used safely and effectively

5.3 Provide instructions and occupational health and safety requirements on the use of hazardous chemicals for cleaning

5.4 Maintain tools and equipment kept in good working condition

5.5 Ensure housekeeping activities are completed

5.6 Process records

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Access, interpret and apply grouting or cementing operations documentation and ensure the work activity is compliant 
Obtain, read, interpret, clarify and confirm work requirements 
Identify and address potential risks, hazards and environmental issues and implement control measures 
Select and wear personal protective equipment appropriate for work activities 
Communicate and coordinate activities with others throughout the work activity 
Ensure adequate material and equipment is available to complete the task successfully 
Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency 
Select the appropriate grouting or cementing procedure to suite the application 
Read tape measure accurately to carry out measurements of tank capacities, casing or rod lengths 
Record or complete tally sheets for number of lengths of casing placed in the hole 
Carry out calculations and measurements 
Record legibly on all reports 
Start-up, run, and close down ancillary equipment 
Manage mixing grout and any additives 
Access, interpret and apply safety data sheets (SDS) 
Conduct grouting or cementing of hole using appropriate equipment and techniques 
Monitor process to ensure consistency and accuracy of placed grout or cement 
Construct well head, hole identification and install hole security devices where required 
Dispose of any excess grout or cement according to site waste management procedures 
Identify possible operational problems in equipment or process 
Identify symptoms of problems needing remedial action 
Determine possible fault causes 
Rectify problem using appropriate solution within area of responsibility 
Follow through items initiated until final resolution has occurred 
Report problems outside area of responsibility to designated person 
Ensure there is no spillage of grout, cement or additives to minimise any associated safety hazards 
Ensure cleaning equipment is used safely and effectively 
Provide instructions and occupational health and safety requirements on the use of hazardous chemicals for cleaning 
Maintain tools and equipment kept in good working condition 
Ensure housekeeping activities are completed 
Process records 
Access, interpret and apply grouting or cementing operations documentation and ensure the work activity is compliant 
Obtain, read, interpret, clarify and confirm work requirements 
Identify and address potential risks, hazards and environmental issues and implement control measures 
Select and wear personal protective equipment appropriate for work activities 
Communicate and coordinate activities with others throughout the work activity 
Ensure adequate material and equipment is available to complete the task successfully 
Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency 
Select the appropriate grouting or cementing procedure to suite the application 
Read tape measure accurately to carry out measurements of tank capacities, casing or rod lengths 
Record or complete tally sheets for number of lengths of casing placed in the hole 
Carry out calculations and measurements 
Record legibly on all reports 
Start-up, run, and close down ancillary equipment 
Manage mixing grout and any additives 
Access, interpret and apply safety data sheets (SDS) 
Conduct grouting or cementing of hole using appropriate equipment and techniques 
Monitor process to ensure consistency and accuracy of placed grout or cement 
Construct well head, hole identification and install hole security devices where required 
Dispose of any excess grout or cement according to site waste management procedures 
Identify possible operational problems in equipment or process 
Identify symptoms of problems needing remedial action 
Determine possible fault causes 
Rectify problem using appropriate solution within area of responsibility 
Follow through items initiated until final resolution has occurred 
Report problems outside area of responsibility to designated person 
Ensure there is no spillage of grout, cement or additives to minimise any associated safety hazards 
Ensure cleaning equipment is used safely and effectively 
Provide instructions and occupational health and safety requirements on the use of hazardous chemicals for cleaning 
Maintain tools and equipment kept in good working condition 
Ensure housekeeping activities are completed 
Process records 

Forms

Assessment Cover Sheet

RIINHB324D - Carry out grouting or cementing operations
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

RIINHB324D - Carry out grouting or cementing operations

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: