Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

RIIOGD202D Mapping and Delivery Guide
Carry out equipment and basic rig maintenance

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency RIIOGD202D - Carry out equipment and basic rig maintenance
Description
Employability Skills
Learning Outcomes and Application This unit describes a participant’s skills and knowledge required to apply carry out equipment and basic rig maintenance in Drilling.This unit is appropriate for those working in assistant roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the unit.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,

this unit must be assessed in the context of this sector’s work environment; and,

this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,

assessment may be conducted in conjunction with the assessment of other Units of Competency; and,

assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,

assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,

where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,

assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:

Industry sector

AQF** Level

Required assessor or Industry subject matter expert experience

Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction

1

1 Year

2

2 Years

Drilling, Coal Mining and Extractive (Quarrying)

3-6

3 Years

Metalliferous Mining and Civil Construction

3-6

5 Years

Other sectors

Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation.

*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.

**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare for operations
  • Access, interpret and apply rig equipment and maintenance and ensure the work activity is compliant
  • Obtain, read, interpret, clarify and confirm work requirements
  • Identify and address potential risks, hazards and environmental issues and implement control measures
  • Select the personal protective equipment appropriate for the work activity
  • Clarify difficulties in carrying out the instructions with the relevant personnel
  • Resolve coordination requirements with others at the site prior to commencing, during and on completion of the work activities and ensure briefings/handover details are read/passed on
  • Conform to safe working practices and operational requirements
  • Confirm availability of necessary auxiliary equipment
       
Element: Prepare and paint metal surface
  • Identify, locate, and wear personal protective equipment
  • Prepare surface using correct equipment
  • Apply rust remover, rust converter and undercoat
  • Mix epoxy, paracryl or other paints in correct proportions
  • Mask and protect equipment against overspray
  • Apply finishing coat using brush, roller and spray gun
  • Clean equipment
       
Element: Assist in maintenance of materials handling equipment
  • Identify faults/potential faults and report immediately
  • Identify, record in writing and/or report requirement for repair or maintenance
  • Perform periodical maintenance on chain blocks and comealongs, ensuring equipment is corrosion free, lubricated and operating freely
  • Assist with periodical examination of hooks, shackles, slings and strops for defects, correct marking of SWL and ease of operation
  • Maintain equipment
       
Element: Prepare and use solvent solutions and rig wash to clean and maintain work areas in non-slippery condition
  • Correctly use hazardous chemicals for cleaning
  • Isolate area being washed or provide warning signs to indicate slippery decks
  • Prepare and apply solvent solutions and rig wash and ensure work areas is maintained for non-slippery conditions
  • Clean equipment correctly and stow on completion
  • Clean, preserve and reassess painting equipment
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

1. Plan and prepare for operations

1.1 Access, interpret and apply rig equipment and maintenance and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements

1.3 Identify and address potential risks, hazards and environmental issues and implement control measures

1.4 Select the personal protective equipment appropriate for the work activity

1.5 Clarify difficulties in carrying out the instructions with the relevant personnel

1.6 Resolve coordination requirements with others at the site prior to commencing, during and on completion of the work activities and ensure briefings/handover details are read/passed on

1.7 Conform to safe working practices and operational requirements

1.8 Confirm availability of necessary auxiliary equipment

2. Prepare and paint metal surface

2.1 Identify, locate, and wear personal protective equipment

2.2 Prepare surface using correct equipment

2.3 Apply rust remover, rust converter and undercoat

2.4 Mix epoxy, paracryl or other paints in correct proportions

2.5 Mask and protect equipment against overspray

2.6 Apply finishing coat using brush, roller and spray gun

2.7 Clean equipment

3. Assist in maintenance of materials handling equipment

3.1 Identify faults/potential faults and report immediately

3.2 Identify, record in writing and/or report requirement for repair or maintenance

3.3 Perform periodical maintenance on chain blocks and comealongs, ensuring equipment is corrosion free, lubricated and operating freely

3.4 Assist with periodical examination of hooks, shackles, slings and strops for defects, correct marking of SWL and ease of operation

3.5 Maintain equipment

4. Prepare and use solvent solutions and rig wash to clean and maintain work areas in non-slippery condition

4.1 Correctly use hazardous chemicals for cleaning

4.2 Isolate area being washed or provide warning signs to indicate slippery decks

4.3 Prepare and apply solvent solutions and rig wash and ensure work areas is maintained for non-slippery conditions

4.4 Clean equipment correctly and stow on completion

4.5 Clean, preserve and reassess painting equipment

Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:

locates and applies applicable legislation, documentation, policies and procedures

implements the requirements, procedures and techniques for the safe, effective and efficient completion of carry out equipment and basic rig maintenance including:

keeping the work area clean

selecting and wearing appropriate protective clothing and equipment

conduct pre-operating checks

conducting periodic maintenance on chain blocks, comealongs and crane hoists

examining hooks, shackles, slings, straps and baskets

assembling rust scaling equipment

assembling surface preparation equipment correctly

ensuring safety pins are in air hose fittings

applying rust treatment undercoat/final coat correctly

reporting immediately any malfunction or equipment failure

works effectively with others to undertake and complete carry out equipment and basic rig maintenance tasks that meets all the required outcomes including:

organising work activities to meet all task requirements

communicating clearly and concisely with others to receive and clarify work instructions

report regularly to and work as directed by the driller/derrickman timely and efficiently

demonstrates completion of equipment and basic rig maintenance that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:

correctly performs maintenance on a minimum of three (3) pieces of plant or equipment

checking, identifying and reporting defects on rigging equipment

cleaning and preserving equipment on completion

applying numerical skills, to calculate measurements, mass, load dimensions and safety working loads

The candidate must demonstrate knowledge carrying out equipment and basic rig maintenance through:

applying organisation and site requirements and procedures for:

written work instructions company and statutory guidelines, procedures and practices

safe operating procedures and practices

rig maintenance procedures including:

chain blocks, comealongs and crane hoist maintenance procedures identifying and using surface preparation equipment

identifying safety pins and air hose fittings

identifying paint types and applications

using equipment cleaning and preservation techniques

complying with platform cleaning procedures

identifying required rust treatment and applications

company equipment maintenance procedures

work health and safety procedures and individual obligations

utilising a range of communication methods, including:

two-way radio

intercom

verbal

hand signals

telephone

public address system

normal drilling operations

non-routine drilling operations

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

1. Plan and prepare for operations

1.1 Access, interpret and apply rig equipment and maintenance and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements

1.3 Identify and address potential risks, hazards and environmental issues and implement control measures

1.4 Select the personal protective equipment appropriate for the work activity

1.5 Clarify difficulties in carrying out the instructions with the relevant personnel

1.6 Resolve coordination requirements with others at the site prior to commencing, during and on completion of the work activities and ensure briefings/handover details are read/passed on

1.7 Conform to safe working practices and operational requirements

1.8 Confirm availability of necessary auxiliary equipment

2. Prepare and paint metal surface

2.1 Identify, locate, and wear personal protective equipment

2.2 Prepare surface using correct equipment

2.3 Apply rust remover, rust converter and undercoat

2.4 Mix epoxy, paracryl or other paints in correct proportions

2.5 Mask and protect equipment against overspray

2.6 Apply finishing coat using brush, roller and spray gun

2.7 Clean equipment

3. Assist in maintenance of materials handling equipment

3.1 Identify faults/potential faults and report immediately

3.2 Identify, record in writing and/or report requirement for repair or maintenance

3.3 Perform periodical maintenance on chain blocks and comealongs, ensuring equipment is corrosion free, lubricated and operating freely

3.4 Assist with periodical examination of hooks, shackles, slings and strops for defects, correct marking of SWL and ease of operation

3.5 Maintain equipment

4. Prepare and use solvent solutions and rig wash to clean and maintain work areas in non-slippery condition

4.1 Correctly use hazardous chemicals for cleaning

4.2 Isolate area being washed or provide warning signs to indicate slippery decks

4.3 Prepare and apply solvent solutions and rig wash and ensure work areas is maintained for non-slippery conditions

4.4 Clean equipment correctly and stow on completion

4.5 Clean, preserve and reassess painting equipment

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Access, interpret and apply rig equipment and maintenance and ensure the work activity is compliant 
Obtain, read, interpret, clarify and confirm work requirements 
Identify and address potential risks, hazards and environmental issues and implement control measures 
Select the personal protective equipment appropriate for the work activity 
Clarify difficulties in carrying out the instructions with the relevant personnel 
Resolve coordination requirements with others at the site prior to commencing, during and on completion of the work activities and ensure briefings/handover details are read/passed on 
Conform to safe working practices and operational requirements 
Confirm availability of necessary auxiliary equipment 
Identify, locate, and wear personal protective equipment 
Prepare surface using correct equipment 
Apply rust remover, rust converter and undercoat 
Mix epoxy, paracryl or other paints in correct proportions 
Mask and protect equipment against overspray 
Apply finishing coat using brush, roller and spray gun 
Clean equipment 
Identify faults/potential faults and report immediately 
Identify, record in writing and/or report requirement for repair or maintenance 
Perform periodical maintenance on chain blocks and comealongs, ensuring equipment is corrosion free, lubricated and operating freely 
Assist with periodical examination of hooks, shackles, slings and strops for defects, correct marking of SWL and ease of operation 
Maintain equipment 
Correctly use hazardous chemicals for cleaning 
Isolate area being washed or provide warning signs to indicate slippery decks 
Prepare and apply solvent solutions and rig wash and ensure work areas is maintained for non-slippery conditions 
Clean equipment correctly and stow on completion 
Clean, preserve and reassess painting equipment 

Forms

Assessment Cover Sheet

RIIOGD202D - Carry out equipment and basic rig maintenance
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

RIIOGD202D - Carry out equipment and basic rig maintenance

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: