Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

RIIPRO303D Mapping and Delivery Guide
Conduct sand wash plant operations

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency RIIPRO303D - Conduct sand wash plant operations
Description
Employability Skills
Learning Outcomes and Application This unit develops a participant’s skills and knowledge required to conduct sand wash plant operations in Extractive.This unit is appropriate for those working in operational rolesNo licensing, legislative or certification requirements apply to this unit at the time of publication
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,

this unit must be assessed in the context of this sector’s work environment; and,

this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,

assessment may be conducted in conjunction with the assessment of other Units of Competency; and,

assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,

assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,

where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,

assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:

Industry sector

AQF** Level

Required assessor or Industry subject matter expert experience

Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction

1

1 Year

2

2 Years

Drilling, Coal Mining and Extractive (Quarrying)

3-6

3 Years

Metalliferous Mining and Civil Construction

3-6

5 Years

Other sectors

Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation.

*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.

**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare for sand wash plant operations
  • Access, interpret and apply sand wash plant documentation, and ensure the work activity is compliant
  • Obtain, read, interpret, clarify and confirm work requirements
  • Identify and address potential risks, hazards and environmental issues, and implement control measures
  • Select and wear correct personal protective equipment appropriate for work activities
  • Inspect and prepare work area in coordination with others
  • Select, and check for faults, plant, tools and equipment to carry out tasks
  • Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
       
Element: Operate the sand wash plant
  • Coordinate activities with others prior to commencing and during work activities
  • Carry out pre-start, start-up and shutdown procedures
  • Select and modify the operating technique to appropriately meet changing work conditions
  • Conduct, control and monitor operations within the equipment limitations, maintaining sand wash efficiency and effectiveness
  • Act on or report monitoring systems and alarms
  • Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment
  • Complete the work plan
       
Element: Carry out post-operational procedures
  • Inspect, fault find and report
  • Carry out operational maintenance, servicing, lubricating and housekeeping tasks
  • Maintain, process and pass on records and reports
       
Element: Plan and prepare for sand wash plant operations
  • Access, interpret and apply sand wash plant documentation, and ensure the work activity is compliant
  • Obtain, read, interpret, clarify and confirm work requirements
  • Identify and address potential risks, hazards and environmental issues, and implement control measures
  • Select and wear correct personal protective equipment appropriate for work activities
  • Inspect and prepare work area in coordination with others
  • Select, and check for faults, plant, tools and equipment to carry out tasks
  • Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
       
Element: Operate the sand wash plant
  • Coordinate activities with others prior to commencing and during work activities
  • Carry out pre-start, start-up and shutdown procedures
  • Select and modify the operating technique to appropriately meet changing work conditions
  • Conduct, control and monitor operations within the equipment limitations, maintaining sand wash efficiency and effectiveness
  • Act on or report monitoring systems and alarms
  • Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment
  • Complete the work plan
       
Element: Carry out post-operational procedures
  • Inspect, fault find and report
  • Carry out operational maintenance, servicing, lubricating and housekeeping tasks
  • Maintain, process and pass on records and reports
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

1. Plan and prepare for sand wash plant operations

1.1 Access, interpret and apply sand wash plant documentation, and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements

1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures

1.4 Select and wear correct personal protective equipment appropriate for work activities

1.5 Inspect and prepare work area in coordination with others

1.6 Select, and check for faults, plant, tools and equipment to carry out tasks

1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency

2. Operate the sand wash plant

2.1 Coordinate activities with others prior to commencing and during work activities

2.2 Carry out pre-start, start-up and shutdown procedures

2.3 Select and modify the operating technique to appropriately meet changing work conditions

2.4 Conduct, control and monitor operations within the equipment limitations, maintaining sand wash efficiency and effectiveness

2.5 Act on or report monitoring systems and alarms

2.6 Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment

2.7 Complete the work plan

3. Carry out post-operational procedures

3.1 Inspect, fault find and report

3.2 Carry out operational maintenance, servicing, lubricating and housekeeping tasks

3.3 Maintain, process and pass on records and reports

Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:

locates and applies applicable documentation, policies and procedures

implements the requirements, procedures and techniques for the safe, effective and efficient completion of sand wash plant operations including:

conducting prestart, start up and shut-down operations

applying diagnostic techniques

selecting and using relevant tools

working wearing personal protective equipment

hazardous goods handling and management

using alarm/monitoring and control systems

applying hazard identification and management procedures

conducting operations monitoring

conducting problem solving

identifying, reporting and addressing contamination

applying chemical and fuel safety measures

accessing, reading, interpreting and applying technical information

working in confined space

works effectively with others to undertake and complete sand wash plant operations that meets all of the required outcomes including:

using a range of communications techniques and equipment to convey information to others

complying with written and verbal reporting requirements and procedures

clarifying work requirements and instructions

inspecting and preparing work area and equipment

demonstrates completion of sand wash plant operations that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:

completing work plan

carry out pre-start, start up and shut down procedures

select and modify operating techniques according to activity

conduct, control and monitor sand wash operations

identify and respond to alarms and signals

completing post operational activities

The candidate must demonstrate knowledge in conducting sand wash plant operations through:

sand wash plant operations

site product characteristics

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

1. Plan and prepare for sand wash plant operations

1.1 Access, interpret and apply sand wash plant documentation, and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements

1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures

1.4 Select and wear correct personal protective equipment appropriate for work activities

1.5 Inspect and prepare work area in coordination with others

1.6 Select, and check for faults, plant, tools and equipment to carry out tasks

1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency

2. Operate the sand wash plant

2.1 Coordinate activities with others prior to commencing and during work activities

2.2 Carry out pre-start, start-up and shutdown procedures

2.3 Select and modify the operating technique to appropriately meet changing work conditions

2.4 Conduct, control and monitor operations within the equipment limitations, maintaining sand wash efficiency and effectiveness

2.5 Act on or report monitoring systems and alarms

2.6 Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment

2.7 Complete the work plan

3. Carry out post-operational procedures

3.1 Inspect, fault find and report

3.2 Carry out operational maintenance, servicing, lubricating and housekeeping tasks

3.3 Maintain, process and pass on records and reports

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Access, interpret and apply sand wash plant documentation, and ensure the work activity is compliant 
Obtain, read, interpret, clarify and confirm work requirements 
Identify and address potential risks, hazards and environmental issues, and implement control measures 
Select and wear correct personal protective equipment appropriate for work activities 
Inspect and prepare work area in coordination with others 
Select, and check for faults, plant, tools and equipment to carry out tasks 
Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency 
Coordinate activities with others prior to commencing and during work activities 
Carry out pre-start, start-up and shutdown procedures 
Select and modify the operating technique to appropriately meet changing work conditions 
Conduct, control and monitor operations within the equipment limitations, maintaining sand wash efficiency and effectiveness 
Act on or report monitoring systems and alarms 
Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment 
Complete the work plan 
Inspect, fault find and report 
Carry out operational maintenance, servicing, lubricating and housekeeping tasks 
Maintain, process and pass on records and reports 
Access, interpret and apply sand wash plant documentation, and ensure the work activity is compliant 
Obtain, read, interpret, clarify and confirm work requirements 
Identify and address potential risks, hazards and environmental issues, and implement control measures 
Select and wear correct personal protective equipment appropriate for work activities 
Inspect and prepare work area in coordination with others 
Select, and check for faults, plant, tools and equipment to carry out tasks 
Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency 
Coordinate activities with others prior to commencing and during work activities 
Carry out pre-start, start-up and shutdown procedures 
Select and modify the operating technique to appropriately meet changing work conditions 
Conduct, control and monitor operations within the equipment limitations, maintaining sand wash efficiency and effectiveness 
Act on or report monitoring systems and alarms 
Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment 
Complete the work plan 
Inspect, fault find and report 
Carry out operational maintenance, servicing, lubricating and housekeeping tasks 
Maintain, process and pass on records and reports 

Forms

Assessment Cover Sheet

RIIPRO303D - Conduct sand wash plant operations
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

RIIPRO303D - Conduct sand wash plant operations

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: