Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

RIISAM211D Mapping and Delivery Guide
Remove, repair and refit tyres and tubes

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency RIISAM211D - Remove, repair and refit tyres and tubes
Description
Employability Skills
Learning Outcomes and Application This unit describes a participant’s skills and knowledge required to remove, repair and refit tyres and tubes in the Resources and Infrastructure Industries. This unit is appropriate for those working in operational roles.No licensing, legislation or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,

this unit is best assessed in the context of this sector’s work environment;

where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of this sector’s workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills; and,

this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,

assessment may be conducted in conjunction with the assessment of other Units of Competency; and,

assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,

assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,

where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,

assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:

Industry sector

AQF** Level

Required assessor or Industry subject matter expert experience

Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction

1

1 Year

2

2 Years

Drilling, Coal Mining and Extractive (Quarrying)

3-6

3 Years

Metalliferous Mining and Civil Construction

3-6

5 Years

Other sectors

Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation.

*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.

**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan for removal, repair and refitting of tyres and tubes
  • Access, interpret and apply tyre service and maintenance documentation and ensure the work activity is compliant
  • Obtain, read, interpret, clarify and confirm work requirements
  • Identify and address potential risks, hazards and environmental issues, and implement control measures
  • Select and wear personal protective equipment appropriate for the work activity
  • Obtain and interpret emergency procedures and be prepared for fire/accident/emergency
  • Set up and schedule work
       
Element: Prepare for removal, repair and refitting of tyres and tubes
  • Identify wheel assembly and the type of mounting system
  • Prepare, clean and inspect wheel assembly for damage, wear, corrosion, foreign material, cracks, and compatibility of components
  • Select tools and equipment and check they are fit for purpose
       
Element: Assess and control risk in removal, repair and refitting of tyres and tubes
  • Identify, control or report any hazardous conditions of the work environment before proceeding. Note points where safety checks are required
  • Identify, control or report any hazardous conditions of the assembly before proceeding. Note points where safety checks are required
  • Identify, control or report any task hazards before proceeding. Note points where safety checks are required
  • Ensure that tyre and or tube is fully deflated before proceeding with the task
  • Identify the safe removal and purging of toxic fill substances
       
Element: Remove tyre and or tube from wheel/rim assembly
  • Apply methods for the removal of tyres and tubes
  • Clean and inspect wheel/rim assembly components and assign status of disposition
  • Complete required documentation
       
Element: Inspect wheel/rim assembly components prior to assembly
  • Ensure selected wheel/rim assembly components are compatible and suitable for application
  • Inspect the tyre for serviceability
  • Inspect the wheel/rim and associated parts for serviceability
  • Inspect the fastening systems for serviceability
  • Assess vehicle hub for serviceability and inspect where applicable
       
Element: Fit tyre and or tube to wheel/rim assembly
  • Apply methods for the fitment of tyres and tubes
  • Assess need for tyre additive and add where required
  • Carry out refitting/replacement
  • Conduct integrity check of wheel assembly
  • Complete required documentation
       
Element: Inflate assembly
  • Inflate assembly for storage or use
  • Complete required documentation
       
Element: Inspect, tyres, tubes and wheels/rims
  • Inspect tyres, tubes and wheels/rims for serviceability, and or reparability
  • Carry out inspections and tests and identify those requiring minor repair
  • Complete required documentation
       
Element: Carry out a minor tube and tyre repair
  • Identify hazards and risks, and apply risk controls and equipment to be used
  • Carry out minor repair of tubes and tyres
  • Complete required documentation
       
Element: Plan for removal, repair and refitting of tyres and tubes
  • Access, interpret and apply tyre service and maintenance documentation and ensure the work activity is compliant
  • Obtain, read, interpret, clarify and confirm work requirements
  • Identify and address potential risks, hazards and environmental issues, and implement control measures
  • Select and wear personal protective equipment appropriate for the work activity
  • Obtain and interpret emergency procedures and be prepared for fire/accident/emergency
  • Set up and schedule work
       
Element: Prepare for removal, repair and refitting of tyres and tubes
  • Identify wheel assembly and the type of mounting system
  • Prepare, clean and inspect wheel assembly for damage, wear, corrosion, foreign material, cracks, and compatibility of components
  • Select tools and equipment and check they are fit for purpose
       
Element: Assess and control risk in removal, repair and refitting of tyres and tubes
  • Identify, control or report any hazardous conditions of the work environment before proceeding. Note points where safety checks are required
  • Identify, control or report any hazardous conditions of the assembly before proceeding. Note points where safety checks are required
  • Identify, control or report any task hazards before proceeding. Note points where safety checks are required
  • Ensure that tyre and or tube is fully deflated before proceeding with the task
  • Identify the safe removal and purging of toxic fill substances
       
Element: Remove tyre and or tube from wheel/rim assembly
  • Apply methods for the removal of tyres and tubes
  • Clean and inspect wheel/rim assembly components and assign status of disposition
  • Complete required documentation
       
Element: Inspect wheel/rim assembly components prior to assembly
  • Ensure selected wheel/rim assembly components are compatible and suitable for application
  • Inspect the tyre for serviceability
  • Inspect the wheel/rim and associated parts for serviceability
  • Inspect the fastening systems for serviceability
  • Assess vehicle hub for serviceability and inspect where applicable
       
Element: Fit tyre and or tube to wheel/rim assembly
  • Apply methods for the fitment of tyres and tubes
  • Assess need for tyre additive and add where required
  • Carry out refitting/replacement
  • Conduct integrity check of wheel assembly
  • Complete required documentation
       
Element: Inflate assembly
  • Inflate assembly for storage or use
  • Complete required documentation
       
Element: Inspect, tyres, tubes and wheels/rims
  • Inspect tyres, tubes and wheels/rims for serviceability, and or reparability
  • Carry out inspections and tests and identify those requiring minor repair
  • Complete required documentation
       
Element: Carry out a minor tube and tyre repair
  • Identify hazards and risks, and apply risk controls and equipment to be used
  • Carry out minor repair of tubes and tyres
  • Complete required documentation
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

1. Plan for removal, repair and refitting of tyres and tubes

1.1 Access, interpret and apply tyre service and maintenance documentation and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements

1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures

1.4 Select and wear personal protective equipment appropriate for the work activity

1.5 Obtain and interpret emergency procedures and be prepared for fire/accident/emergency

1.6 Set up and schedule work

2. Prepare for removal, repair and refitting of tyres and tubes

2.1 Identify wheel assembly and the type of mounting system

2.2 Prepare, clean and inspect wheel assembly for damage, wear, corrosion, foreign material, cracks, and compatibility of components

2.3 Select tools and equipment and check they are fit for purpose

3. Assess and control risk in removal, repair and refitting of tyres and tubes

3.1 Identify, control or report any hazardous conditions of the work environment before proceeding. Note points where safety checks are required

3.2 Identify, control or report any hazardous conditions of the assembly before proceeding. Note points where safety checks are required

3.3 Identify, control or report any task hazards before proceeding. Note points where safety checks are required

3.4 Ensure that tyre and or tube is fully deflated before proceeding with the task

3.5 Identify the safe removal and purging of toxic fill substances

4. Remove tyre and or tube from wheel/rim assembly

4.1 Apply methods for the removal of tyres and tubes

4.2 Clean and inspect wheel/rim assembly components and assign status of disposition

4.3 Complete required documentation

5. Inspect wheel/rim assembly components prior to assembly

5.1 Ensure selected wheel/rim assembly components are compatible and suitable for application

5.2 Inspect the tyre for serviceability

5.3 Inspect the wheel/rim and associated parts for serviceability

5.4 Inspect the fastening systems for serviceability

5.5 Assess vehicle hub for serviceability and inspect where applicable

6. Fit tyre and or tube to wheel/rim assembly

6.1 Apply methods for the fitment of tyres and tubes

6.2 Assess need for tyre additive and add where required

6.3 Carry out refitting/replacement

6.4 Conduct integrity check of wheel assembly

6.5 Complete required documentation

7. Inflate assembly

7.1 Inflate assembly for storage or use

7.2 Complete required documentation

8. Inspect, tyres, tubes and wheels/rims

8.1 Inspect tyres, tubes and wheels/rims for serviceability, and or reparability

8.2 Carry out inspections and tests and identify those requiring minor repair

8.3 Complete required documentation

9. Carry out a minor tube and tyre repair

9.1 Identify hazards and risks, and apply risk controls and equipment to be used

9.2 Carry out minor repair of tubes and tyres

9.3 Complete required documentation

Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:

locates and applies relevant documentation, policies and procedures

demonstrates completion of the removal, fitting and repair of tyres and tubes that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:

Inspecting wheel assembly for:

damage

wear

corrosion

foreign material

cracks

compatibility of components

controlling or reporting hazardous conditions related to:

work environment

assembly

tasks

tyre/tube

toxic fill substances

removing tyre and/or tube from wheel/rim

inspecting wheel/rim

carrying out minor tube and tyre repairs

fitting tyre and/or tube

inflating assembly

The candidate must demonstrate knowledge in removing, repairing and refitting tyres and tubes through:

accessing, interpreting and applying organisational and site requirements and procedures for:

identifying and managing risks

equipment safety requirements

inspections

tyre and tube removal and refitting/replacement

tyre and tube repair

ballast identification, types and application

tyre fill identification, types and application

tyre fill adding/removal methods

relevant manufacturer/company policies

types of tubes and tyres and their construction

workplace requirements in relation to tyre repair

roadworthiness requirements relating to tyres and rims

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

1. Plan for removal, repair and refitting of tyres and tubes

1.1 Access, interpret and apply tyre service and maintenance documentation and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements

1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures

1.4 Select and wear personal protective equipment appropriate for the work activity

1.5 Obtain and interpret emergency procedures and be prepared for fire/accident/emergency

1.6 Set up and schedule work

2. Prepare for removal, repair and refitting of tyres and tubes

2.1 Identify wheel assembly and the type of mounting system

2.2 Prepare, clean and inspect wheel assembly for damage, wear, corrosion, foreign material, cracks, and compatibility of components

2.3 Select tools and equipment and check they are fit for purpose

3. Assess and control risk in removal, repair and refitting of tyres and tubes

3.1 Identify, control or report any hazardous conditions of the work environment before proceeding. Note points where safety checks are required

3.2 Identify, control or report any hazardous conditions of the assembly before proceeding. Note points where safety checks are required

3.3 Identify, control or report any task hazards before proceeding. Note points where safety checks are required

3.4 Ensure that tyre and or tube is fully deflated before proceeding with the task

3.5 Identify the safe removal and purging of toxic fill substances

4. Remove tyre and or tube from wheel/rim assembly

4.1 Apply methods for the removal of tyres and tubes

4.2 Clean and inspect wheel/rim assembly components and assign status of disposition

4.3 Complete required documentation

5. Inspect wheel/rim assembly components prior to assembly

5.1 Ensure selected wheel/rim assembly components are compatible and suitable for application

5.2 Inspect the tyre for serviceability

5.3 Inspect the wheel/rim and associated parts for serviceability

5.4 Inspect the fastening systems for serviceability

5.5 Assess vehicle hub for serviceability and inspect where applicable

6. Fit tyre and or tube to wheel/rim assembly

6.1 Apply methods for the fitment of tyres and tubes

6.2 Assess need for tyre additive and add where required

6.3 Carry out refitting/replacement

6.4 Conduct integrity check of wheel assembly

6.5 Complete required documentation

7. Inflate assembly

7.1 Inflate assembly for storage or use

7.2 Complete required documentation

8. Inspect, tyres, tubes and wheels/rims

8.1 Inspect tyres, tubes and wheels/rims for serviceability, and or reparability

8.2 Carry out inspections and tests and identify those requiring minor repair

8.3 Complete required documentation

9. Carry out a minor tube and tyre repair

9.1 Identify hazards and risks, and apply risk controls and equipment to be used

9.2 Carry out minor repair of tubes and tyres

9.3 Complete required documentation

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Access, interpret and apply tyre service and maintenance documentation and ensure the work activity is compliant 
Obtain, read, interpret, clarify and confirm work requirements 
Identify and address potential risks, hazards and environmental issues, and implement control measures 
Select and wear personal protective equipment appropriate for the work activity 
Obtain and interpret emergency procedures and be prepared for fire/accident/emergency 
Set up and schedule work 
Identify wheel assembly and the type of mounting system 
Prepare, clean and inspect wheel assembly for damage, wear, corrosion, foreign material, cracks, and compatibility of components 
Select tools and equipment and check they are fit for purpose 
Identify, control or report any hazardous conditions of the work environment before proceeding. Note points where safety checks are required 
Identify, control or report any hazardous conditions of the assembly before proceeding. Note points where safety checks are required 
Identify, control or report any task hazards before proceeding. Note points where safety checks are required 
Ensure that tyre and or tube is fully deflated before proceeding with the task 
Identify the safe removal and purging of toxic fill substances 
Apply methods for the removal of tyres and tubes 
Clean and inspect wheel/rim assembly components and assign status of disposition 
Complete required documentation 
Ensure selected wheel/rim assembly components are compatible and suitable for application 
Inspect the tyre for serviceability 
Inspect the wheel/rim and associated parts for serviceability 
Inspect the fastening systems for serviceability 
Assess vehicle hub for serviceability and inspect where applicable 
Apply methods for the fitment of tyres and tubes 
Assess need for tyre additive and add where required 
Carry out refitting/replacement 
Conduct integrity check of wheel assembly 
Complete required documentation 
Inflate assembly for storage or use 
Complete required documentation 
Inspect tyres, tubes and wheels/rims for serviceability, and or reparability 
Carry out inspections and tests and identify those requiring minor repair 
Complete required documentation 
Identify hazards and risks, and apply risk controls and equipment to be used 
Carry out minor repair of tubes and tyres 
Complete required documentation 
Access, interpret and apply tyre service and maintenance documentation and ensure the work activity is compliant 
Obtain, read, interpret, clarify and confirm work requirements 
Identify and address potential risks, hazards and environmental issues, and implement control measures 
Select and wear personal protective equipment appropriate for the work activity 
Obtain and interpret emergency procedures and be prepared for fire/accident/emergency 
Set up and schedule work 
Identify wheel assembly and the type of mounting system 
Prepare, clean and inspect wheel assembly for damage, wear, corrosion, foreign material, cracks, and compatibility of components 
Select tools and equipment and check they are fit for purpose 
Identify, control or report any hazardous conditions of the work environment before proceeding. Note points where safety checks are required 
Identify, control or report any hazardous conditions of the assembly before proceeding. Note points where safety checks are required 
Identify, control or report any task hazards before proceeding. Note points where safety checks are required 
Ensure that tyre and or tube is fully deflated before proceeding with the task 
Identify the safe removal and purging of toxic fill substances 
Apply methods for the removal of tyres and tubes 
Clean and inspect wheel/rim assembly components and assign status of disposition 
Complete required documentation 
Ensure selected wheel/rim assembly components are compatible and suitable for application 
Inspect the tyre for serviceability 
Inspect the wheel/rim and associated parts for serviceability 
Inspect the fastening systems for serviceability 
Assess vehicle hub for serviceability and inspect where applicable 
Apply methods for the fitment of tyres and tubes 
Assess need for tyre additive and add where required 
Carry out refitting/replacement 
Conduct integrity check of wheel assembly 
Complete required documentation 
Inflate assembly for storage or use 
Complete required documentation 
Inspect tyres, tubes and wheels/rims for serviceability, and or reparability 
Carry out inspections and tests and identify those requiring minor repair 
Complete required documentation 
Identify hazards and risks, and apply risk controls and equipment to be used 
Carry out minor repair of tubes and tyres 
Complete required documentation 

Forms

Assessment Cover Sheet

RIISAM211D - Remove, repair and refit tyres and tubes
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

RIISAM211D - Remove, repair and refit tyres and tubes

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: