Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

RIISAM302D Mapping and Delivery Guide
Service and handover plant and machines

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency RIISAM302D - Service and handover plant and machines
Description
Employability Skills
Learning Outcomes and Application This unit describes a participant’s skills and knowledge required to service and handover plant and machines in Coal and Metalliferous mining and Extractive.This unit is appropriate for those working in operational roles.No licensing, legislation or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,

this unit is best assessed in the context of this sector’s work environment;

where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of this sector’s workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills; and,

this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,

assessment may be conducted in conjunction with the assessment of other Units of Competency; and,

assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,

assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,

where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,

assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:

Industry sector

AQF** Level

Required assessor or Industry subject matter expert experience

Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction

1

1 Year

2

2 Years

Drilling, Coal Mining and Extractive (Quarrying)

3-6

3 Years

Metalliferous Mining and Civil Construction

3-6

5 Years

Other sectors

Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation.

*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.

**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare for service and handover plant and machines
  • Access, interpret and apply all service and maintenance documentation and ensure the work activity is compliant
  • Obtain, read, interpret, clarify and confirm work requirements
  • Identify and address potential risks, hazards and environmental issues, and implement control measures
  • Select and wear appropriate personal protective equipment for the work activity
  • Obtain permits required to carry out work from authorised personnel
  • Identify and obtain replacement parts and service tools
  • Inspect working area to determine appropriate path of movement for loads and equipment/vehicles
  • Maintain cleanliness of the servicing area
       
Element: Assess and secure plant/machine
  • Conduct external checks of plant/machine
  • Secure plant/machine and inspect attachments for defects
  • Carry out pre-operational and post start-up equipment checks
  • Report defects and damage
       
Element: Service, maintain and repair plant/machine
  • Communicate and coordinate activities with others throughout the work activity
  • Operate service/maintenance equipment
  • Conduct servicing or maintenance of plant/machine
  • Apply procedures for the disposal of used oil and lubricant
  • Maintain servicing schedule and/or records
       
Element: Test plant/machine operational functions under load
  • Ensure safety of personnel and avoidance of damage to plant/machine and environment while testing the plant/machine under load
  • Shift material using appropriate equipment
  • Assess weight of test load in compliance with equipment load plate specifications
  • Apply control levers to ensure safe and effective operation of equipment
  • Maintain speed of machine to safe operating and site limits
  • Place test load to ensure stability of materials
  • Identify and respond to hazardous and emergency situations
       
Element: Shutdown plant/machine and secure site
  • Park plant/machine to avoid machine and site hazards
  • Conduct shut-down and isolate vehicle
  • Return plant/machine to service
  • Complete post-operational checks and handover documentation
       
Element: Plan and prepare for service and handover plant and machines
  • Access, interpret and apply all service and maintenance documentation and ensure the work activity is compliant
  • Obtain, read, interpret, clarify and confirm work requirements
  • Identify and address potential risks, hazards and environmental issues, and implement control measures
  • Select and wear appropriate personal protective equipment for the work activity
  • Obtain permits required to carry out work from authorised personnel
  • Identify and obtain replacement parts and service tools
  • Inspect working area to determine appropriate path of movement for loads and equipment/vehicles
  • Maintain cleanliness of the servicing area
       
Element: Assess and secure plant/machine
  • Conduct external checks of plant/machine
  • Secure plant/machine and inspect attachments for defects
  • Carry out pre-operational and post start-up equipment checks
  • Report defects and damage
       
Element: Service, maintain and repair plant/machine
  • Communicate and coordinate activities with others throughout the work activity
  • Operate service/maintenance equipment
  • Conduct servicing or maintenance of plant/machine
  • Apply procedures for the disposal of used oil and lubricant
  • Maintain servicing schedule and/or records
       
Element: Test plant/machine operational functions under load
  • Ensure safety of personnel and avoidance of damage to plant/machine and environment while testing the plant/machine under load
  • Shift material using appropriate equipment
  • Assess weight of test load in compliance with equipment load plate specifications
  • Apply control levers to ensure safe and effective operation of equipment
  • Maintain speed of machine to safe operating and site limits
  • Place test load to ensure stability of materials
  • Identify and respond to hazardous and emergency situations
       
Element: Shutdown plant/machine and secure site
  • Park plant/machine to avoid machine and site hazards
  • Conduct shut-down and isolate vehicle
  • Return plant/machine to service
  • Complete post-operational checks and handover documentation
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

1. Plan and prepare for service and handover plant and machines

1.1 Access, interpret and apply all service and maintenance documentation and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements

1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures

1.4 Select and wear appropriate personal protective equipment for the work activity

1.5 Obtain permits required to carry out work from authorised personnel

1.6 Identify and obtain replacement parts and service tools

1.7 Inspect working area to determine appropriate path of movement for loads and equipment/vehicles

1.8 Maintain cleanliness of the servicing area

2. Assess and secure plant/machine

2.1 Conduct external checks of plant/machine

2.2 Secure plant/machine and inspect attachments for defects

2.3 Carry out pre-operational and post start-up equipment checks

2.4 Report defects and damage

3. Service, maintain and repair plant/machine

3.1 Communicate and coordinate activities with others throughout the work activity

3.2 Operate service/maintenance equipment

3.3 Conduct servicing or maintenance of plant/machine

3.4 Apply procedures for the disposal of used oil and lubricant

3.5 Maintain servicing schedule and/or records

4. Test plant/machine operational functions under load

4.1 Ensure safety of personnel and avoidance of damage to plant/machine and environment while testing the plant/machine under load

4.2 Shift material using appropriate equipment

4.3 Assess weight of test load in compliance with equipment load plate specifications

4.4 Apply control levers to ensure safe and effective operation of equipment

4.5 Maintain speed of machine to safe operating and site limits

4.6 Place test load to ensure stability of materials

4.7 Identify and respond to hazardous and emergency situations

5. Shutdown plant/machine and secure site

5.1 Park plant/machine to avoid machine and site hazards

5.2 Conduct shut-down and isolate vehicle

5.3 Return plant/machine to service

5.4 Complete post-operational checks and handover documentation

Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:

locates and applies relevant documentation, policies and procedures

implements the requirements, procedures and techniques for the safe, effective and efficient servicing and handing over plant and machines including:

organisation and site requirements and procedures

attachment securing procedures

hazard identification procedures and risk control

appropriate equipment

lever controls safely and effectively

and securing plant and machinery

operational functions under load

shut down of equipment and securing the site

works effectively with others to service and handover plant and machines that meets all of the required outcomes including:

organising work activities to meet all task requirements

communicating clearly and concisely with others to receive and clarify work instructions

communicating clearly and concisely with others to resolve coordination requirements prior to commencing and during work activities

demonstrates completion of servicing and handing over plant and machines that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:

planning and preparing

obtaining the required permits

obtaining replacement parts and service tools

conducting external checks of plant/machine

securing plant/machine

inspecting attachments for defects

carrying out equipment checks

conducting servicing or maintenance of plant/machine

post-maintenance testing of plant and machines

shut-down and isolate vehicle

completing post-operational checks and handover documentation

The candidate must demonstrate knowledge in servicing and handover plant and machines through:

accessing, interpreting and applying organisational and site requirements and procedures for:

work health and safety

environmental issues

obtaining permits

site communication signals

reporting defects

safe operating speed limits

completion of service/maintenance schedule

documentation and reporting

interpreting manufacturer’s or equivalent specifications for conduct of external checks

interpreting manufacturer’s specification for securing attachments

obtaining and applying manufacturer’s specifications/operational manual requirements for pre-operational and post start-up checks

identifying and applying safe operating limits of hydraulic shovel/excavator

identifying and applying test load parameters

applying requirements for stability of materials

applying manufacturer’s specifications for shutdown and isolation of hydraulic shovel/excavator

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

1. Plan and prepare for service and handover plant and machines

1.1 Access, interpret and apply all service and maintenance documentation and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements

1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures

1.4 Select and wear appropriate personal protective equipment for the work activity

1.5 Obtain permits required to carry out work from authorised personnel

1.6 Identify and obtain replacement parts and service tools

1.7 Inspect working area to determine appropriate path of movement for loads and equipment/vehicles

1.8 Maintain cleanliness of the servicing area

2. Assess and secure plant/machine

2.1 Conduct external checks of plant/machine

2.2 Secure plant/machine and inspect attachments for defects

2.3 Carry out pre-operational and post start-up equipment checks

2.4 Report defects and damage

3. Service, maintain and repair plant/machine

3.1 Communicate and coordinate activities with others throughout the work activity

3.2 Operate service/maintenance equipment

3.3 Conduct servicing or maintenance of plant/machine

3.4 Apply procedures for the disposal of used oil and lubricant

3.5 Maintain servicing schedule and/or records

4. Test plant/machine operational functions under load

4.1 Ensure safety of personnel and avoidance of damage to plant/machine and environment while testing the plant/machine under load

4.2 Shift material using appropriate equipment

4.3 Assess weight of test load in compliance with equipment load plate specifications

4.4 Apply control levers to ensure safe and effective operation of equipment

4.5 Maintain speed of machine to safe operating and site limits

4.6 Place test load to ensure stability of materials

4.7 Identify and respond to hazardous and emergency situations

5. Shutdown plant/machine and secure site

5.1 Park plant/machine to avoid machine and site hazards

5.2 Conduct shut-down and isolate vehicle

5.3 Return plant/machine to service

5.4 Complete post-operational checks and handover documentation

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Access, interpret and apply all service and maintenance documentation and ensure the work activity is compliant 
Obtain, read, interpret, clarify and confirm work requirements 
Identify and address potential risks, hazards and environmental issues, and implement control measures 
Select and wear appropriate personal protective equipment for the work activity 
Obtain permits required to carry out work from authorised personnel 
Identify and obtain replacement parts and service tools 
Inspect working area to determine appropriate path of movement for loads and equipment/vehicles 
Maintain cleanliness of the servicing area 
Conduct external checks of plant/machine 
Secure plant/machine and inspect attachments for defects 
Carry out pre-operational and post start-up equipment checks 
Report defects and damage 
Communicate and coordinate activities with others throughout the work activity 
Operate service/maintenance equipment 
Conduct servicing or maintenance of plant/machine 
Apply procedures for the disposal of used oil and lubricant 
Maintain servicing schedule and/or records 
Ensure safety of personnel and avoidance of damage to plant/machine and environment while testing the plant/machine under load 
Shift material using appropriate equipment 
Assess weight of test load in compliance with equipment load plate specifications 
Apply control levers to ensure safe and effective operation of equipment 
Maintain speed of machine to safe operating and site limits 
Place test load to ensure stability of materials 
Identify and respond to hazardous and emergency situations 
Park plant/machine to avoid machine and site hazards 
Conduct shut-down and isolate vehicle 
Return plant/machine to service 
Complete post-operational checks and handover documentation 
Access, interpret and apply all service and maintenance documentation and ensure the work activity is compliant 
Obtain, read, interpret, clarify and confirm work requirements 
Identify and address potential risks, hazards and environmental issues, and implement control measures 
Select and wear appropriate personal protective equipment for the work activity 
Obtain permits required to carry out work from authorised personnel 
Identify and obtain replacement parts and service tools 
Inspect working area to determine appropriate path of movement for loads and equipment/vehicles 
Maintain cleanliness of the servicing area 
Conduct external checks of plant/machine 
Secure plant/machine and inspect attachments for defects 
Carry out pre-operational and post start-up equipment checks 
Report defects and damage 
Communicate and coordinate activities with others throughout the work activity 
Operate service/maintenance equipment 
Conduct servicing or maintenance of plant/machine 
Apply procedures for the disposal of used oil and lubricant 
Maintain servicing schedule and/or records 
Ensure safety of personnel and avoidance of damage to plant/machine and environment while testing the plant/machine under load 
Shift material using appropriate equipment 
Assess weight of test load in compliance with equipment load plate specifications 
Apply control levers to ensure safe and effective operation of equipment 
Maintain speed of machine to safe operating and site limits 
Place test load to ensure stability of materials 
Identify and respond to hazardous and emergency situations 
Park plant/machine to avoid machine and site hazards 
Conduct shut-down and isolate vehicle 
Return plant/machine to service 
Complete post-operational checks and handover documentation 

Forms

Assessment Cover Sheet

RIISAM302D - Service and handover plant and machines
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

RIISAM302D - Service and handover plant and machines

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: