Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

SISOCYT002 Mapping and Delivery Guide
Ride bicycles on roads and pathways, easy conditions

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency SISOCYT002 - Ride bicycles on roads and pathways, easy conditions
Description
Employability Skills
Learning Outcomes and Application This unit describes the performance outcomes, skills and knowledge required to ride road bicycles as part of a group on easy road terrain, in lightly trafficked and other areas and according to planned routes.Easy road terrain is defined as on sealed roads and sealed or unsealed, but compacted, off-road pathways over gentle gradients, with no steep ascents or descents. Light vehicular traffic would be present on roads with routes confined to minor roads.It applies to leaders, guides or instructors, who use these skills when leading participants during cycling activities. Leadership skills are provided in complementary units. The unit can also apply to assistants and support staff.This unit applies to any type of organisation that delivers outdoor recreation activities including commercial, not-for-profit and government organisations. Cyclists must comply with the legislated road rules for the particular Australian state or territory, and with special road rules that apply to cyclists. All training and assessment activities must comply with the local state or territory requirements.No occupational licensing or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Cycle Touring
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for the ride.
  • Select clothing, footwear, personal protective and other equipment suitable for the ride and conditions, and check for safe working condition.
  • Complete safety and serviceability checks immediately before riding and correct bike deficiencies, as required.
  • Stow clothing, personal resources, and food according to access requirements during ride.
  • Interpret planned route from activity plans and maps to assist in following the route.
  • Confirm activity safety and emergency response procedures to ensure compliance during activities.
  • Confirm protocols for communications between riders and with motorists.
  • Fit and adjust personal protective equipment to ensure comfort and safety.
       
Element: Ride bicycles in easy road and pathway conditions.
  • Mount and dismount bike safely while maintaining balance.
  • Control speed of bike using techniques suitable for sealed and compacted surfaces, to smoothly pedal, change gears and brake.
  • Establish and maintain an appropriate riding rhythm and pace to minimise fatigue, strain and injury.
  • Maintain appropriate posture, balance and weight shift to efficiently handle and control the bike in a straight line, through wide bends and around corners.
  • Ride in bunch formation, where appropriate, and make required adjustments to own pace and place in formation.
       
Element: Negotiate hazards, obstacles and gentle gradients.
  • Modify riding technique to account for changes in gradient, on and off road surfaces.
  • Control line of direction and speed to safely approach, avoid or negotiate obstacles.
  • Choose and maintain posture and body position appropriate for negotiating gentle ascents and descents.
  • Utilise smooth and timely gear changes to assist pedalling effort when negotiating gentle ascents.
       
Element: Negotiate minor roads in light vehicular traffic
  • Maintain appropriate position on the road to avoid collisions with vehicles and other users.
  • Monitor traffic conditions at minor intersections and roundabouts to safely negotiate a course of travel.
  • Monitor driveways and other situations for cars entering the traffic.
  • Ride at an appropriate speed for traffic conditions.
  • Maintain effective communication with party members, motorists and other users throughout all activities.
  • Ensure compliance with road rules and etiquette applicable to cycling.
  • Select clothing, footwear, personal protective and other equipment suitable for the ride and conditions, and check for safe working condition.
  • Complete safety and serviceability checks immediately before riding and correct bike deficiencies, as required.
  • Stow clothing, personal resources, and food according to access requirements during ride.
  • Interpret planned route from activity plans and maps to assist in following the route.
  • Confirm activity safety and emergency response procedures to ensure compliance during activities.
  • Confirm protocols for communications between riders and with motorists.
  • Fit and adjust personal protective equipment to ensure comfort and safety.
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Select clothing, footwear, personal protective and other equipment suitable for the ride and conditions, and check for safe working condition. 
Complete safety and serviceability checks immediately before riding and correct bike deficiencies, as required. 
Stow clothing, personal resources, and food according to access requirements during ride. 
Interpret planned route from activity plans and maps to assist in following the route. 
Confirm activity safety and emergency response procedures to ensure compliance during activities. 
Confirm protocols for communications between riders and with motorists. 
Fit and adjust personal protective equipment to ensure comfort and safety. 
Mount and dismount bike safely while maintaining balance. 
Control speed of bike using techniques suitable for sealed and compacted surfaces, to smoothly pedal, change gears and brake. 
Establish and maintain an appropriate riding rhythm and pace to minimise fatigue, strain and injury. 
Maintain appropriate posture, balance and weight shift to efficiently handle and control the bike in a straight line, through wide bends and around corners. 
Ride in bunch formation, where appropriate, and make required adjustments to own pace and place in formation. 
Modify riding technique to account for changes in gradient, on and off road surfaces. 
Control line of direction and speed to safely approach, avoid or negotiate obstacles. 
Choose and maintain posture and body position appropriate for negotiating gentle ascents and descents. 
Utilise smooth and timely gear changes to assist pedalling effort when negotiating gentle ascents. 
Maintain appropriate position on the road to avoid collisions with vehicles and other users. 
Monitor traffic conditions at minor intersections and roundabouts to safely negotiate a course of travel. 
Monitor driveways and other situations for cars entering the traffic. 
Ride at an appropriate speed for traffic conditions. 
Maintain effective communication with party members, motorists and other users throughout all activities. 
Ensure compliance with road rules and etiquette applicable to cycling. 
Select clothing, footwear, personal protective and other equipment suitable for the ride and conditions, and check for safe working condition. 
Complete safety and serviceability checks immediately before riding and correct bike deficiencies, as required. 
Stow clothing, personal resources, and food according to access requirements during ride. 
Interpret planned route from activity plans and maps to assist in following the route. 
Confirm activity safety and emergency response procedures to ensure compliance during activities. 
Confirm protocols for communications between riders and with motorists. 
Fit and adjust personal protective equipment to ensure comfort and safety. 

Forms

Assessment Cover Sheet

SISOCYT002 - Ride bicycles on roads and pathways, easy conditions
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

SISOCYT002 - Ride bicycles on roads and pathways, easy conditions

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: