The assessment process must address all of the following items of evidence.
Ability to:
1. Access workplace information on cooling water requirements
2. Select, fit and use personal protective clothing and/or equipment
3. Confirm status of equipment, that it is clean ready for operation and services are available
4. Prepare and handle chemicals safely. This includes following correct preparation, handling and storage procedures and use of appropriate protective clothing and equipment
5. Conduct pre-start checks. This typically include checking:
raw water supply
tower condition and cleanliness
spray and pond condition
all safety guards and covers are in place and operational
drains are closed
chemicals are available
6. Liaise with other work areas to advise of users of cooling system status
7. Demonstrate set up and start up procedures in both manual and automatic modes
8. Monitor cooling water system operation. This typically includes visual inspections and conducting tests to monitor characteristics such as:
chemical addition rates and residuals
water quality
blow down rate
temperatures
water distribution
signs of fouling and corrosion
equipment condition including fans, sprays and pumps
water level and make-up flow
9. Take corrective action in response to out-of-specification results
10. Report and/or record corrective action as required
11. Demonstrate procedure to clean and shut down cooling water system
12. Demonstrate use of emergency cooling water supply system
13. Maintain workplace records including cleaning records and chemical usage
14. Maintain work area to meet housekeeping standards
May include ability to:
15. Use process control systems
Knowledge of:
16. Relevant state OHS legislation, standards and codes of practice relating to work responsibilities
17. Purpose and basic principles of evaporative cooling and water treatment in order to prevent corrosion and microbiological fouling
18. Cooling water system layout
19. The effect of make up water quality on blow down rates and fouling rates
20. The impact of variables including cooling water failure and high water temperature and plant operation
21. Purpose of chemicals used
22. Consequences of system fouling and typical causes
23. Safe work procedures including awareness of health and safety hazards related to cooling water system operation and associated control measures. Hazards typically include handling chemicals, manual handling, risks of working with warm water systems (Legionella)
24. Hierarchy of hazard control measures
25. Purpose and limitations of protective clothing and equipment
26. Methods used to render equipment safe to inspect, maintain and/or clean including lock-out, tag-out and isolation procedures
27. Water quality test procedures
28. Typical causes of water contamination and corrective action required
29. Equipment purpose and basic operating principles of cooling water system and related equipment. This includes pumps, valves, tower and fans. It may also include the dosing system
30. Operating requirements and parameters
31. Cleaning methods and procedures
32. Procedures for operating emergency cooling water system
33. Environmental issues and controls. Includes those relating to chemical and/or container disposal and any overflow of the system to waters of the state
34. Requirements to liaise/advise related work areas
35. Housekeeping standards for the work area
36. Reporting and recording systems. This includes both statutory and workplace requirements
May include knowledge of:
37. Basic operating principles of process control where relevant. This includes the relationship between control panels and systems and the physical equipment
Relationship with other standards
Pre-requisite units
There are no pre-requisite units for this competency standard.
Co-assessment of related units
Other units of competency relevant to the work role should be assessed in conjunction with this unit. This may include:
SUGZPCI2A Operate a process control interface
Resources required for assessment
Assessment must occur in a real or simulated workplace where the assessee has access to:
Cooling water system and related equipment
Chemicals
Relevant codes and standards
Operating procedures and related advice on equipment operation
Personal protective clothing and equipment
Communication systems and equipment
Housekeeping standards and procedures
Workplace information recording systems, requirements and procedures
Assessment requirements
For information on how to assess this competency standard and who can assess, refer to the Assessment Guidelines for this Training Package.